Gordon Henry Waller
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gordon Henry Waller has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Corey Thomas Love
Chemistry Division, U.S. Naval Research Laboratory, Washington, DC 20375, USA
4 shared publications - Patrick J. West
Chemistry Division
3 shared publications - Rachel Carter
Chemistry Division, U.S. Naval Research Laboratory, Washington, DC 20375, USA
3 shared publications - Connor Jacob
Excet, Inc., A Precise Systems Company, Springfield, VA 22150, USA
2 shared publications Corey T. Love
Chemistry Division, U.S. Naval Research Laboratory
2 shared publications- Dillon Hayman
Excet, Inc., A Precise Systems Company, Springfield, VA 22150, USA
2 shared publications
Latest Publications
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (1) , 107
Structural and Electrochemical Evolution of Li vs. FeS2 Batteries in Molten Salt Electrolytes
Low-temperature molten salt electrolytes for lithium batteries (e.g. (EMIM-TFSI/LiTFSI and the Li-K FSA eutectic mixtures [1, 2]) enable operation of electrochemical devices near ambient temperatures in an analogous fashion to conventional salt-in-solvent electrolytes. However, for certain applications involving long periods of inactive storage, the ability to freeze the electrolyte for low-self discharge storage is desirable. In this presentation, we will describe the electrochemical behavior as well as the thermal and structural stability of low-temperature molten salts at various temperatures throughout the melt-freeze cycle. At elevated temperatures, enhanced ionic conductivity and electrochemical kinetics are observed, then the cells can still be cooled to ambient conditions for storage, resulting in a dramatic drop in ionic conductivity which arrests self-discharge. We identify the changes in electrochemical behavior as measured by Electrochemical Impedance Spectroscopy (EIS), and structure as measured by ex situ X-ray Diffraction (XRD) and vibrational spectroscopies. Interestingly, the low temperature molten salts in this study show some hysteresis in structural and electrochemical properties when solidified, transitioning from a crystalline and relatively well-ordered structure as observed by XRD and vibrational spectroscopy. In the crystalline state the electrolytes have extremely low conductivity at room temperature, while as a molten liquid they exhibit conductivity comparable to conventional salt-in-solvent electrolytes. Cooling the molten liquids results in an amorphous and viscous phase of intermediate conductivity. Spectral shifts of the Raman-active S-N-S bend characteristic of FSA and TFSI allude to differences in coordination structure as a function of temperature. Fourier transform infrared (FTIR) studies and molecular dynamics simulations corroborate Raman by identifying structural changes and the potential presence of degradation products. These intriguing properties motivate our work characterizing EMIM-TFSI/LiTFSI and the Li-K FSA eutectic before and after melting and freezing cycles. Additionally, time-resolved techniques such as two-dimensional infrared (2DIR) spectroscopy relate ultrafast dynamics of the anions to bulk properties of molten salts. Finally, we further extend our work by describing these electrolytes in prototypical electrochemical systems, notably a Li-metal anode vs. FeS2 cathode full-cell. Physical Chemistry Chemical Physics, 2014. 16(24): p. 12341-12349. Matter, 2023. 6(12): p. 4357-4375.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (1) , 107
Structural and Electrochemical Evolution of Li vs. FeS2 Batteries in Molten Salt Electrolytes
Low-temperature molten salt electrolytes for lithium batteries (e.g. (EMIM-TFSI/LiTFSI and the Li-K FSA eutectic mixtures [1, 2]) enable operation of electrochemical devices near ambient temperatures in an analogous fashion to conventional salt-in-solvent electrolytes. However, for certain applications involving long periods of inactive storage, the ability to freeze the electrolyte for low-self discharge storage is desirable. In this presentation, we will describe the electrochemical behavior as well as the thermal and structural stability of low-temperature molten salts at various temperatures throughout the melt-freeze cycle. At elevated temperatures, enhanced ionic conductivity and electrochemical kinetics are observed, then the cells can still be cooled to ambient conditions for storage, resulting in a dramatic drop in ionic conductivity which arrests self-discharge. We identify the changes in electrochemical behavior as measured by Electrochemical Impedance Spectroscopy (EIS), and structure as measured by ex situ X-ray Diffraction (XRD) and vibrational spectroscopies. Interestingly, the low temperature molten salts in this study show some hysteresis in structural and electrochemical properties when solidified, transitioning from a crystalline and relatively well-ordered structure as observed by XRD and vibrational spectroscopy. In the crystalline state the electrolytes have extremely low conductivity at room temperature, while as a molten liquid they exhibit conductivity comparable to conventional salt-in-solvent electrolytes. Cooling the molten liquids results in an amorphous and viscous phase of intermediate conductivity. Spectral shifts of the Raman-active S-N-S bend characteristic of FSA and TFSI allude to differences in coordination structure as a function of temperature. Fourier transform infrared (FTIR) studies and molecular dynamics simulations corroborate Raman by identifying structural changes and the potential presence of degradation products. These intriguing properties motivate our work characterizing EMIM-TFSI/LiTFSI and the Li-K FSA eutectic before and after melting and freezing cycles. Additionally, time-resolved techniques such as two-dimensional infrared (2DIR) spectroscopy relate ultrafast dynamics of the anions to bulk properties of molten salts. Finally, we further extend our work by describing these electrolytes in prototypical electrochemical systems, notably a Li-metal anode vs. FeS2 cathode full-cell. Physical Chemistry Chemical Physics, 2014. 16(24): p. 12341-12349. Matter, 2023. 6(12): p. 4357-4375.
- 5 June 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (11) , 110513
Stabilization of Zero-Excess Sodium Metal Anodes Using LiPF 6
The adoption of sodium metal anodes is limited due to their poor coulombic efficiency stemming from dendritic plating morphologies and incomplete solid electrolyte interface (SEI) formation. This study presents a sodium metal battery electrolyte formulation utilizing lithium hexafluorophosphate as an additive, which selectively decomposes at the sodium metal interface to form a highly uniform, compact, and inorganic-rich SEI layer. This improved passivation layer enables >99% columbic efficiency operation of zero-excess sodium metal anodes. The mechanism of action of this additive is further elucidated using advanced surface characterization techniques including X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM) to show that SEI layers formed on zero-excess sodium metal anodes in the presence of LiPF 6 are thinner and more uniform than those formed in electrolytes without additives. Further, electron energy loss spectroscopy (EELS) reveals that SEI layers formed in the presence of LiPF 6 are enriched in lithium fluoride, a known component of high-quality SEI films in lithium-based battery systems and a direct decomposition product of the LiPF 6 additive, further establishing the role of LiPF 6 as a sacrificial film-forming additive for the stabilization of Na metal anode interfaces.
- 5 June 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (11) , 110513
Stabilization of Zero-Excess Sodium Metal Anodes Using LiPF 6
The adoption of sodium metal anodes is limited due to their poor coulombic efficiency stemming from dendritic plating morphologies and incomplete solid electrolyte interface (SEI) formation. This study presents a sodium metal battery electrolyte formulation utilizing lithium hexafluorophosphate as an additive, which selectively decomposes at the sodium metal interface to form a highly uniform, compact, and inorganic-rich SEI layer. This improved passivation layer enables >99% columbic efficiency operation of zero-excess sodium metal anodes. The mechanism of action of this additive is further elucidated using advanced surface characterization techniques including X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM) to show that SEI layers formed on zero-excess sodium metal anodes in the presence of LiPF 6 are thinner and more uniform than those formed in electrolytes without additives. Further, electron energy loss spectroscopy (EELS) reveals that SEI layers formed in the presence of LiPF 6 are enriched in lithium fluoride, a known component of high-quality SEI films in lithium-based battery systems and a direct decomposition product of the LiPF 6 additive, further establishing the role of LiPF 6 as a sacrificial film-forming additive for the stabilization of Na metal anode interfaces.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (4) , 715
The Role of Thermal Variations in Battery Degradation: In-Situ Detection in 18650s Correlated to Fundamental Phenomena Investigation in Single-Layer Pouch and Coin Cells
Thermal variations can evolve within Li-ion batteries as a result of (1) applied cooling, (2) varied thermal conductivity of components, or (3) local defects. We investigated the role of through-plane (current collector to current collector) thermal gradients on li-ion coin cells and single layer pouch cells and observed rapid degradation (within 10 cycles) with a thermal gradient of ~2⁰C. Data analysis and post mortem of the electrode determined that directionality of the through-plane gradient dictated positive electrode or negative electrode dominated degradation modes. We note that within a commercial cell, if a thermal gradient evolves through the layers, alternating thermal gradients will develop due to the use of double-sided electrode coatings on each current collector. We probe the response of 18650 cells undergoing cycling through operando diffraction experiments at the Advanced Photon Source. Extensive cycling of commercial cells under similar cooling environments reveals more rapid degradation than cells subject to less cooling. Further, in efforts to understand the fundamental thermodynamic pheonomena contributing to accelerated degradation, we isolated the response of the electrode and electrolyte components to a thermal gradient using novel electrode entropic potential and solvent entropy measurements. The talk concludes with recommendations to limit thermal gradients and limit performance degradation.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (4) , 715
The Role of Thermal Variations in Battery Degradation: In-Situ Detection in 18650s Correlated to Fundamental Phenomena Investigation in Single-Layer Pouch and Coin Cells
Thermal variations can evolve within Li-ion batteries as a result of (1) applied cooling, (2) varied thermal conductivity of components, or (3) local defects. We investigated the role of through-plane (current collector to current collector) thermal gradients on li-ion coin cells and single layer pouch cells and observed rapid degradation (within 10 cycles) with a thermal gradient of ~2⁰C. Data analysis and post mortem of the electrode determined that directionality of the through-plane gradient dictated positive electrode or negative electrode dominated degradation modes. We note that within a commercial cell, if a thermal gradient evolves through the layers, alternating thermal gradients will develop due to the use of double-sided electrode coatings on each current collector. We probe the response of 18650 cells undergoing cycling through operando diffraction experiments at the Advanced Photon Source. Extensive cycling of commercial cells under similar cooling environments reveals more rapid degradation than cells subject to less cooling. Further, in efforts to understand the fundamental thermodynamic pheonomena contributing to accelerated degradation, we isolated the response of the electrode and electrolyte components to a thermal gradient using novel electrode entropic potential and solvent entropy measurements. The talk concludes with recommendations to limit thermal gradients and limit performance degradation.
- Open Access
Form Factor and Chemistry Agnostic Battery Deactivation Using Electrically Conductive Gel for Safe Transportation
Removing residual energy from end-of-life batteries prior to transportation requires some method of deactivation. While many methods have been proposed, very few have been implemented due to limitations of cost, safety, and efficacy. In this work, multiple cell and battery types (e.g., lithium-polymer pouch cells, 18650 lithium-ion cell, alkaline batteries, and lithium-ion power-tool batteries) were deactivated using a low-cost and easily applied gel consisting of borax cross-linked polyvinyl alcohol and carbon. The PVA–carbon composite creates an external short-circuit pathway of moderate resistance that enables the complete discharge of batteries. Abusive testing conducted after deactivation demonstrates that hazards are largely eliminated, including a complete avoidance of thermal runaway from lithium-ion cells and a reduction in flammable and toxic gases by several orders of magnitude.
Open AccessForm Factor and Chemistry Agnostic Battery Deactivation Using Electrically Conductive Gel for Safe Transportation
Removing residual energy from end-of-life batteries prior to transportation requires some method of deactivation. While many methods have been proposed, very few have been implemented due to limitations of cost, safety, and efficacy. In this work, multiple cell and battery types (e.g., lithium-polymer pouch cells, 18650 lithium-ion cell, alkaline batteries, and lithium-ion power-tool batteries) were deactivated using a low-cost and easily applied gel consisting of borax cross-linked polyvinyl alcohol and carbon. The PVA–carbon composite creates an external short-circuit pathway of moderate resistance that enables the complete discharge of batteries. Abusive testing conducted after deactivation demonstrates that hazards are largely eliminated, including a complete avoidance of thermal runaway from lithium-ion cells and a reduction in flammable and toxic gases by several orders of magnitude.
- Open Access
First Look at Safety and Performance Evaluation of Commercial Sodium-Ion Batteries
Herein, we investigate the performance and safety of four of the early-stage, commercial Na-ion batteries available in 2024, representing the most popular cathode types across research and commercialization: polyanion (Na-VPF), layered metal oxide (Na-NMF), and a Prussian blue analog (Na-tmCN). The cells deliver a wide range of energy density with Na-tmCN delivering the least (23 Wh/kg) and Na-NMF delivering the most (127 Wh/kg). The Na-VPF cell was in between (47 Wg/kg). Capacity retention under specified cycling conditions and with periodic 0 V excursions was the most robust for the Na-tmCN cells in both cases. Accelerating rate calorimetry (ARC) and nail penetration testing finds that Na-NMF cells do undergo thermal runaway in response to abuse, while the Na-VPF and Na-tmCN exhibit only low self-heating rates (2, CH4, toxic acid gases (HCN, HF, NH3), and typical electrolyte components (carbonate ester solvents). Gases similar to those detected during Li-ion failures were found in addition to HCN for the Na-tmCN cell. Our work compares different types of commercial Na-ion batteries for the first time, allowing for a more holistic comparison of the safety and performance tradeoffs for different Na-ion cathode types emerging in 2024.
Open AccessFirst Look at Safety and Performance Evaluation of Commercial Sodium-Ion Batteries
Herein, we investigate the performance and safety of four of the early-stage, commercial Na-ion batteries available in 2024, representing the most popular cathode types across research and commercialization: polyanion (Na-VPF), layered metal oxide (Na-NMF), and a Prussian blue analog (Na-tmCN). The cells deliver a wide range of energy density with Na-tmCN delivering the least (23 Wh/kg) and Na-NMF delivering the most (127 Wh/kg). The Na-VPF cell was in between (47 Wg/kg). Capacity retention under specified cycling conditions and with periodic 0 V excursions was the most robust for the Na-tmCN cells in both cases. Accelerating rate calorimetry (ARC) and nail penetration testing finds that Na-NMF cells do undergo thermal runaway in response to abuse, while the Na-VPF and Na-tmCN exhibit only low self-heating rates (2, CH4, toxic acid gases (HCN, HF, NH3), and typical electrolyte components (carbonate ester solvents). Gases similar to those detected during Li-ion failures were found in addition to HCN for the Na-tmCN cell. Our work compares different types of commercial Na-ion batteries for the first time, allowing for a more holistic comparison of the safety and performance tradeoffs for different Na-ion cathode types emerging in 2024.
- Open Access
- 23 December 2024
- Published by MDPI AG in Preprints.org
First Look at Safety and Performance Evaluation of Commercial Sodium-ion Batteries
Herein we investigate the performance and safety of four of the early-stage, commercial Na-ion batteries available in 2024, representing the most popular cathode types across research and commercialization: polyanion (Na-VPF), layered metal oxide (Na-NMF), and Prussian blue analog (Na-tmCN). The cells deliver a wide range of energy density with the Na-tmCN delivering the least (23 Wh/kg) and Na-NMF delivering the most (127 Wh/kg). Capacity retention under specified cycling conditions and with periodic 0V excursions was the most robust for the Na-tmCN cells in both cases. Accelerating rate calorimetry (ARC) and nail penetration testing finds that Na-NMF cells do undergo thermal runaway in response to abuse, while the Na-VPF and Na-tmCN exhibit only low self-heating rates (<1 °C/min). During these safety tests, all cells exhibited off-gassing, so we conducted in-line FTIR equipped with a heated gas cell to detect CO, CO2, CH4, toxic acid gases (HCN, HF, NH3), and typical electrolyte components (carbonate ester solvents). Gases similar to those detected during Li-ion failures were found in addition to HCN for the Na-tmCN cell. Our work compares different types of commercial Na-ion batteries for the first time allowing for a more wholistic comparison of the safety and performance tradeoffs for different Na-ion cathode types emerging in 2024.
- 23 December 2024
- Published by MDPI AG in Preprints.org
Open AccessFirst Look at Safety and Performance Evaluation of Commercial Sodium-ion Batteries
Herein we investigate the performance and safety of four of the early-stage, commercial Na-ion batteries available in 2024, representing the most popular cathode types across research and commercialization: polyanion (Na-VPF), layered metal oxide (Na-NMF), and Prussian blue analog (Na-tmCN). The cells deliver a wide range of energy density with the Na-tmCN delivering the least (23 Wh/kg) and Na-NMF delivering the most (127 Wh/kg). Capacity retention under specified cycling conditions and with periodic 0V excursions was the most robust for the Na-tmCN cells in both cases. Accelerating rate calorimetry (ARC) and nail penetration testing finds that Na-NMF cells do undergo thermal runaway in response to abuse, while the Na-VPF and Na-tmCN exhibit only low self-heating rates (<1 °C/min). During these safety tests, all cells exhibited off-gassing, so we conducted in-line FTIR equipped with a heated gas cell to detect CO, CO2, CH4, toxic acid gases (HCN, HF, NH3), and typical electrolyte components (carbonate ester solvents). Gases similar to those detected during Li-ion failures were found in addition to HCN for the Na-tmCN cell. Our work compares different types of commercial Na-ion batteries for the first time allowing for a more wholistic comparison of the safety and performance tradeoffs for different Na-ion cathode types emerging in 2024.
- 12 December 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 629
Thermo-electrochemical characterization of a commercial LiNi0.8Co0.15Al0.05O2 /Graphite+Si 18650 cell
- 12 December 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 629
Thermo-electrochemical characterization of a commercial LiNi0.8Co0.15Al0.05O2 /Graphite+Si 18650 cell