Ali H. Omar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ali H. Omar has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Esamaddin M. Mulapeer
Civil Engineering Department, Faculty of Engineering, Tishk International University, Erbil, Iraq
2 shared publications - A. A. El-Geassy
Central Metallurgical Research and Development Institute (CMRDI), P.O. Box 87, Helwan 11421, Egypt
1 shared publication - Bakhtyar Nassih Najar
Department of Highway and Bridge Engineering, Erbil Polytechnic University, Erbil, Iraq
1 shared publication - Elsayed Mousa
Department of Metallurgy, Swerim AB, Luleå, Sweden
1 shared publication İzZettin Alhalil
1 shared publication- Mahmoud Nasr
Laboratory of Physics of Condensed Matter, University of Picardie Jules Verne, Scientific Pole, 33 Rue Saint-Leu, CEDEX 1, 80039 Amiens, France
1 shared publication
Latest Publications
- 24 October 2026
- Published by Springer Nature in Architecture, Structures and Construction
- Vol. 6 (2) , 49
Twisting skyscrapers: a multidisciplinary review of architectural, structural, and construction challenges
- 24 October 2026
- Published by Springer Nature in Architecture, Structures and Construction
- Vol. 6 (2) , 49
Twisting skyscrapers: a multidisciplinary review of architectural, structural, and construction challenges
- Open Access
- 30 December 2025
- Published by Pontificia Universidad Catolica de Chile in Revista de la construcción
- Vol. 24 (3) , 533-550
Comparison of structural responses for tall buildings with varying twisting rates and core wall configurations
This study aims to compare the structural responses of tall buildings (TBs) with different twisting rates and core wall configurations to investigate their effect under various loading conditions. The study examines three groups of TBs with varying core wall layouts: hexagonal shape for group A, circular shape for group B, and square shape for group C. Three models were constructed for each group, with twisting angles of 0°, 90°, and 180°. The study initially compares the nine different models’ natural periods of vibration and modal mass participation ratios. The towers’ wind and seismic responses for each model under wind, response spectrum (RS), and nonlinear time history (NTH) analysis are also presented. The wind, RS, and NTH analysis outcomes regarding the structural system (natural periods, drift ratios, story shear forces, and overturning moments) and members (shear forces and bending moments on columns and walls) have been compared. Finally, a multiple-criteria decision-making algorithm was used to determine the optimum model based on the investigated responses. The findings indicate that the core wall layout has a more significant influence on the response of TBs than the twisting rate. Specifically, a building with a hexagonal core wall system and 0-degree twist is identified as the optimal configuration. Although its effects are less significant than seismic forces, wind analysis reveals that twisting in buildings slightly reduces the natural period and drift ratios. This study emphasizes the impact of TBs configurations and twisting rates on both wind and seismic responses.
- 30 December 2025
- Published by Pontificia Universidad Catolica de Chile in Revista de la construcción
- Vol. 24 (3) , 533-550
Open AccessComparison of structural responses for tall buildings with varying twisting rates and core wall configurations
This study aims to compare the structural responses of tall buildings (TBs) with different twisting rates and core wall configurations to investigate their effect under various loading conditions. The study examines three groups of TBs with varying core wall layouts: hexagonal shape for group A, circular shape for group B, and square shape for group C. Three models were constructed for each group, with twisting angles of 0°, 90°, and 180°. The study initially compares the nine different models’ natural periods of vibration and modal mass participation ratios. The towers’ wind and seismic responses for each model under wind, response spectrum (RS), and nonlinear time history (NTH) analysis are also presented. The wind, RS, and NTH analysis outcomes regarding the structural system (natural periods, drift ratios, story shear forces, and overturning moments) and members (shear forces and bending moments on columns and walls) have been compared. Finally, a multiple-criteria decision-making algorithm was used to determine the optimum model based on the investigated responses. The findings indicate that the core wall layout has a more significant influence on the response of TBs than the twisting rate. Specifically, a building with a hexagonal core wall system and 0-degree twist is identified as the optimal configuration. Although its effects are less significant than seismic forces, wind analysis reveals that twisting in buildings slightly reduces the natural period and drift ratios. This study emphasizes the impact of TBs configurations and twisting rates on both wind and seismic responses.
- Open Access
- 28 April 2025
- Published by Springer Nature in Discover Civil Engineering
- Vol. 2 (1) , 1-12
Durability and mechanical performance of geopolymer mortar with partial replacement of fly ash by rice husk ash and variations in alkaline activator concentrations
- 28 April 2025
- Published by Springer Nature in Discover Civil Engineering
- Vol. 2 (1) , 1-12
Open AccessDurability and mechanical performance of geopolymer mortar with partial replacement of fly ash by rice husk ash and variations in alkaline activator concentrations
- 1 October 2008
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
- Vol. 35 (7) , 531-538
Isothermal reduction behaviour of MnO 2 doped Fe 2 O 3 compacts with H 2 at 1073–1373 K
Pure Fe 2 O 3 and Fe 2 O 3 doped with 2, 4, and 6 mass% of MnO 2 (>99%) compacts annealed at 1473 K for 6 h were isothermally reduced with H 2 at 1073–1373 K. The O 2 weight loss resulted from the reduction of compacts was continuously recorded as a function of time using thermogravimetric analysis (TGA). High pressure mercury porosimeter, optical and scanning electron microscopes, X-ray phase analysis and vibrating sample magnetometer were used to characterise both the annealed and reduced samples. In MnO 2 containing samples, manganese ferrite (MnFe 2 O 4 ) was identified. The rate of reduction of pure and doped compacts increased with temperature and decreased with the increase in MnO 2 content. Unlike in pure compacts, the reduction of MnO 2 containing samples was not completed and stopped at different extents depending on MnO 2 (mass%). At initial reduction stages, the decrease in the rate was due to the presence of poorly reducible manganese ferrite (MnFe 2 O 4 ) phase which was partially reduced to iron manganese oxide (FeO 0.899 , MnO 0.101 ) at the final stages. The reduction mechanism was predicted from the correlation between the reduction kinetics and the structure of partially reduced samples at different temperatures. The reduction of pure and doped samples was controlled by a combined effect of interfacial chemical reaction and gaseous diffusion mechanism at their initial stages. At final stages, the interfacial chemical reaction was the rate controlling mechanism.
- 1 October 2008
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
- Vol. 35 (7) , 531-538
Isothermal reduction behaviour of MnO 2 doped Fe 2 O 3 compacts with H 2 at 1073–1373 K
Pure Fe 2 O 3 and Fe 2 O 3 doped with 2, 4, and 6 mass% of MnO 2 (>99%) compacts annealed at 1473 K for 6 h were isothermally reduced with H 2 at 1073–1373 K. The O 2 weight loss resulted from the reduction of compacts was continuously recorded as a function of time using thermogravimetric analysis (TGA). High pressure mercury porosimeter, optical and scanning electron microscopes, X-ray phase analysis and vibrating sample magnetometer were used to characterise both the annealed and reduced samples. In MnO 2 containing samples, manganese ferrite (MnFe 2 O 4 ) was identified. The rate of reduction of pure and doped compacts increased with temperature and decreased with the increase in MnO 2 content. Unlike in pure compacts, the reduction of MnO 2 containing samples was not completed and stopped at different extents depending on MnO 2 (mass%). At initial reduction stages, the decrease in the rate was due to the presence of poorly reducible manganese ferrite (MnFe 2 O 4 ) phase which was partially reduced to iron manganese oxide (FeO 0.899 , MnO 0.101 ) at the final stages. The reduction mechanism was predicted from the correlation between the reduction kinetics and the structure of partially reduced samples at different temperatures. The reduction of pure and doped samples was controlled by a combined effect of interfacial chemical reaction and gaseous diffusion mechanism at their initial stages. At final stages, the interfacial chemical reaction was the rate controlling mechanism.