JPJordan Pascale

Jordan Pascale

*This is an algorithmically generated author record based on publicly available information.

Jordan Pascale has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Centralized Pressure Control and Displacement Quantization with Digital Displacement Pumps

    by Jordan Pascale, Chris Williamson, Jim Hennen, Paul Rindahl

    Danfoss Power Solutions has developed a centralized pressure control solution for multipump hydraulic power units in the industrial market. This system architecture has been developed around the use of the Digital Displacement Pump® (DDP) which is highly efficient over a wide range of operating conditions and has typically shown a >30% decrease in electrical input energy over similar systems using axial piston pumps. MTS Systems expanded this centralized control to work in a harmonized fashion with other pumping technologies housed within unique motor-pump modules; some containing DDP and others containing conventional axial piston pumps. This arrangement provided several benefits and empirically demonstrated the DDP module efficiency over the axial piston pump module in supplying fluid power to dynamic downstream force and motion systems that replicate real-world automotive drive files and test track profiles. Special consideration was required when implementing DDP in a system with multiple pumps' (maximum of 6) outlet flow combined in parallel. Allowing each individual pump controller to operate in pressure control mode caused compounding complexity in tuning, and noisy, unstable flow pulsations. As a solution, a centralized pressure control scheme was implemented in which a system level microcontroller evaluated user inputs, pressure signals from a transducer, executed logic, and output displacement commands to each pump controller as required to meet the system demand. What makes this control scheme unique is that in a multi-pump system, one pump has a continuously variable displacement fraction with any value from 0 to 100%. The other pump displacements were controlled in a quantized manner with stepped values of displacement (for example: 0%, 25%, 75%, 100%). Hose resonant frequencies were also avoided in this manner. Testing and implementation of this control scheme has proven to be effective in reducing system tuning complexity and undesirable flow pulsations in the system. Measured results indicate that the average pressure ripple power was reduced by 28% to 94% and the average pressure ripple band power by 61% to 98% (pump module dependent). Successful implementation of the centralized control allowed MTS to demonstrate through an energy efficiency study that HPUs equipped with DDP consume up to 37.5% less energy than those with swashplate pumps for a given test cycle.