LRLei Ren

Lei Ren

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Lei Ren has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • An 85 Kr-Based Multieffect Hybrid Nuclear Battery With High Power Density

    by Zhuoyang Lv, Houjun He, Yumin Liu, Lei Ren, Wei Qian, Xiaoyu Wang, Jiachen Zhang, Yuncheng Han

    Micro-nuclear batteries have attracted growing interest as long-lived power sources for microelectronic sensors, medical implants, and space systems where maintenance-free operation is essential. Conventional type nuclear batteries have demonstrated reliable operation but remain constrained by intrinsic material and design limitations, such as betavoltaic cells suffering from strong self-absorption in solid isotopes, radioluminescent batteries experiencing low overall efficiency due to multi-stage optical conversion, and radioisotope thermoelectric generator (RTG) requiring bulky heat sources and scarce isotopes. This work proposes an 85Kr–based hybrid nuclear battery that simultaneously harnesses betavoltaic, photovoltaic, and thermoelectric effects within a compact centimeter-sized cubic architecture. The gaseous 85Kr source in a Kr/Cl2 mixture enclosing the center chamber can form KrCl* excimers and emit ultraviolet photons with 222 nm wavelength. These photons together with the 85Kr decay β particles, would be efficiently absorbed by surrounding 4H-SiC converters and converted into electric power, while residual heat is recycled via Bi2Te3 thermoelectric modules located outside and converted into electric power once again. This multi-effect energy coupling enables comprehensive utilization of the 85Kr decay energy, significantly enhancing both power density and conversion efficiency. The hybrid device achieves 1.98 W output power and 11.4% energy conversion efficiency with about 1 dm3 in size and 10 atm gas pressure, surpassing the power of conventional single-mode nuclear batteries by over an order of magnitude. The proposed 85Kr hybrid scheme demonstrates a promising route toward miniaturized nuclear battery with high power density.


  • Noise suppression and enhanced energy resolution in NiO/β-Ga2O3 radiation detectors

    by X. Y. Pei, X. D. Meng, L. Ren, Y. C. Han, N. Sun, W. Z. Xu, F.-F. Ren, D. W. Yan, Y. Yang, S. L. Gu, et al.

    In this Letter, we investigated the noise sources in NiO/β-Ga2O3 p–n heterojunctions and demonstrated the field management for noise suppression to enhance radiation detection performance. Combining TCAD simulations and experimental electrical analysis, we identified two primary noise sources, including shot noise originating from carrier density fluctuations and non-uniform carrier drift velocities, and flicker noise associated with localized carrier trapping centers. To mitigate these noise contributions, we developed a large-area (1 × 1 mm2) NiO/β-Ga2O3 p–n heterojunction detector incorporating an amorphous high-k dielectric BaTiO3 layer as the field-plate (FP) structure. By effectively redistributing the electric field, the FP implementation minimizes field crowding at device edges, reduces leakage current, and enhances carrier transport uniformity, thereby leading to significant background noise suppression. Consequently, the detector achieves an improved energy resolution of 4.3% for α-particle detection, surpassing the previously reported Ga2O3 radiation detectors. These findings deepen the fundamental understanding of noise mechanisms in β-Ga2O3 devices and demonstrate a robust field-engineering strategy for achieving low-noise and high-energy-resolution radiation detectors.


  • Alpha particle detection based on low leakage and high-barrier vertical PtOx/β-Ga2O3 Schottky barrier diode

    by Shiyu Bai, Xiaohu Hou, Xiangdong Meng, Lei Ren, Chen Li, Zhao Han, Shunjie Yu, Yan Liu, Zhixin Peng, Yuncheng Han, et al.

    High-performance radiation detectors are essential in many sectors spanning medical diagnostics, nuclear control, and particle physics. Ultrawide bandgap semiconductor materials have become one of the most promising candidates due to their excellent performance. Here, based on β-Ga2O3, a Schottky diode-type alpha particle detector was demonstrated. In order to reduce the reverse leakage current of the large-area device, the metal-oxide electrode PtOx was introduced to form high-barrier contacts (1.83 eV) with Ga2O3. The device exhibits a low leakage current density of 63 pA/cm2 at −100 V and apparent energy spectra of 241Am generated alpha particles with an energy of 5.486 MeV at various reverse voltages from −40 to −120 V. The charge collection efficiency (CCE) and energy resolution of the device (at −120 V) are 31.7% and 15.3%, respectively. Meanwhile, the mechanism of interaction between alpha particles and β-Ga2O3 was analyzed, and a 45° oblique incidence was adopted to increase the deposited energy of alpha particles in the depletion region. Furthermore, the differences between actual CCE and theoretical CCE are investigated as guidance for further improving detector performance. This work reveals the great potential and good prospects of Ga2O3 as an economical, efficient, and radiation-resistant ionizing radiation detector.


  • Maximizing Output Power in p–n Junction Betavoltaic Batteries via Monte Carlo and Physics-Based Compact Model Cosimulation

    by Houjun He, Yuncheng Han, Xiaoyu Wang, Lei Ren, Xiangdong Meng, Mingjie Zheng

    Betavoltaic nuclear batteries show promise as compact and enduring power sources for microelectromechanical systems (MEMS). Current theoretical calculations often overlook practical diode characteristics like surface recombination ( S ), bulk recombination within the space-charge region (R-SCR), series resistance ( Rs ) and shunt resistance ( Rsh ), resulting in significant discrepancies between theoretical predictions and experimental outcomes, with differences in JSC , VOC , or converter efficiency up to tenfold. To address this, a Practical Diode Model, integrating these practical characteristics, is developed via Monte Carlo and Physics-Based Compact Model Co-Simulation. We quantitatively analyze the differential impacts and synergistic effects of these practical characteristics on JSC , VOC , FF , and Pout , highlighting the detrimental effects of S , R-SCR, and Rs , while emphasizing the beneficial role of Rsh . Further analysis of the degree of influence of S , Rs , and Rsh on output power reveals a priority ranking order of Rs , S , and Rsh for Si-based batteries, and S , Rsh , and Rs for SiC-based batteries. This approach effectively bridges the theoretical-experimental gap, evidenced by J − V curves closely matching tested batteries and minute relative errors of -0.8% to 0.6% between Pout values and their tested counterparts, emphasizing its accuracy in predictions. We predict output performance across material qualities, obtaining achievable powers of 16.82 and 73.90 nW/cm 2 for planar Si- and SiC-based batteries, and evaluate the quality levels of current batteries. Furthermore, our model can forecast the performance of 3D batteries by incorporating an extended electron-hole pair generation rate model into 3D structures, achieving 28 μW/cm 3 for the 63 Ni-Si-based multi-layer battery, surpassing planar silicon and suitable for MEMS applications.


  • Enhancing betavoltaic nuclear battery performance with 3D P+PNN+ multi-groove structure via carrier evolution

    by Hou-Jun He, Yun-Cheng Han, Xiao-Yu Wang, Yu-Min Liu, Jia-Chen Zhang, Lei Ren, Ming-Jie Zheng


  • Oxygen vacancies and local amorphization introduced by high fluence neutron irradiation in β -Ga2O3 power diodes

    by Jinyang Liu, Zhao Han, Lei Ren, Xiao Yang, Guangwei Xu, Weibing Hao, Xiaolong Zhao, Shu Yang, Di Lu, Yuncheng Han, et al.

    Beta phase gallium oxide (β-Ga2O3) is emerging as a promising material for space applications due to its unique properties and potential high performance in extreme environments. In this work, we systematically study the impact of β-Ga2O3 Schottky barrier diodes (SBDs) under a high fluence neutron irradiation to explore the degradation mechanism of the devices. After irradiated by neutrons with an average energy of 1–2 MeV and a dose rate of 1.3 × 1012 cm−2 s−1, SBDs with a homoepitaxial layer suffered serious performance degradation. The main manifestation of this degradation was a substantial increase in on-resistance, which rose from 3.9 to 3.5 × 108 mΩ·cm2 under the aforementioned irradiation conditions. The appearance of amorphous/polycrystalline striped lattice damage in the epitaxial layer as well as the presence of deep-level defects caused by oxygen vacancies are factors related to this phenomenon. The simulation revealed that the capture reaction of neutrons and Ga elements is the primary cause of neutron irradiation. This reaction generates high-energy beta- particles (β-particles) resulting in the formation of defects. This paper reveals the degradation mechanism of β-Ga2O3 SBDs under neutron irradiation and provides a possible design roadmap for radiation-resistant β-Ga2O3 power devices. Moreover, a high-temperature oxygen annealing process was implemented, which proved to be in restoring the device performance.


  • Neutronics analysis of a subcritical blanket system driven by a gas dynamic trap-based fusion neutron source for 99Mo production

    by Hou-Hua Xiong, Qiu-Sun Zeng, Yun-Cheng Han, Lei Ren, Isaac Kwasi Baidoo, Ni Chen, Zheng-Kui Zeng, Xiao-Yu Wang