Mohammad Moniripiri
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohammad Moniripiri has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Ardeshir Hanifi
KTH Royal Institute of Technology
3 shared publications - Alberto Felipe Rius-Vidales
Delft University of Technology
1 shared publication - Dan S. Henningson
KTH Royal Institute of Technology
1 shared publication - Daniel Rodríguez
Universidad Politécnica de Madrid
1 shared publication - Dominik Obrist
University of Bern
1 shared publication - Karoline-Marie Bornemann
University of Bern
1 shared publication
Latest Publications
- Open Access
- 25 March 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1031
Optimal three-dimensional perturbations in fluttering and non-fluttering bioprosthetic aortic valves
This study examines the transition to turbulence downstream of fluttering and non-fluttering bioprosthetic aortic valves using global linear stability theory. During systole, increasing inflow velocities result in temporally evolving flow profiles downstream of the valve which are highly influenced by the leaflet kinematics. These profiles are time averaged at the sinotubular junction over successive windows and used as boundary conditions to obtain base flows for stability analysis. Three-dimensional global modes are computed for one design of each valve type across multiple time windows, revealing several unstable modes whose frequencies and growth rates increase over time. Notably, the non-fluttering valve exhibits higher growth rates than the fluttering valve. The resulting eigenspectra show that, for each case, the most unstable eigenvalues align along two distinct parabolic branches in the complex plane. For each valve case, the modes within each branch are found to have similar group velocities, suggesting that the unstable modes along a branch constitute a coherent structure. Motivated by this, a transient growth analysis is conducted to identify the optimal initial perturbations that maximise energy gain for a given time horizon. When superimposed onto the base flow, these perturbations generate vortical structures that closely resemble those observed in fully coupled nonlinear fluid–structure interaction simulations for a similar time scale as the one used to obtain the optimal perturbations. These results suggest that the optimal perturbations may initiate the shear-layer instabilities responsible for transition to turbulence, providing valuable insight into the underlying mechanisms in the flow fields downstream of bioprosthetic valve designs.
- 25 March 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1031
Open AccessOptimal three-dimensional perturbations in fluttering and non-fluttering bioprosthetic aortic valves
This study examines the transition to turbulence downstream of fluttering and non-fluttering bioprosthetic aortic valves using global linear stability theory. During systole, increasing inflow velocities result in temporally evolving flow profiles downstream of the valve which are highly influenced by the leaflet kinematics. These profiles are time averaged at the sinotubular junction over successive windows and used as boundary conditions to obtain base flows for stability analysis. Three-dimensional global modes are computed for one design of each valve type across multiple time windows, revealing several unstable modes whose frequencies and growth rates increase over time. Notably, the non-fluttering valve exhibits higher growth rates than the fluttering valve. The resulting eigenspectra show that, for each case, the most unstable eigenvalues align along two distinct parabolic branches in the complex plane. For each valve case, the modes within each branch are found to have similar group velocities, suggesting that the unstable modes along a branch constitute a coherent structure. Motivated by this, a transient growth analysis is conducted to identify the optimal initial perturbations that maximise energy gain for a given time horizon. When superimposed onto the base flow, these perturbations generate vortical structures that closely resemble those observed in fully coupled nonlinear fluid–structure interaction simulations for a similar time scale as the one used to obtain the optimal perturbations. These results suggest that the optimal perturbations may initiate the shear-layer instabilities responsible for transition to turbulence, providing valuable insight into the underlying mechanisms in the flow fields downstream of bioprosthetic valve designs.
- Open Access
- 9 February 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1028
Direct numerical simulation of the effects of a smooth surface hump on transition in swept-wing boundary layers
The effect of a smooth surface hump on laminar–turbulent transition over a swept wing is investigated using direct numerical simulation (DNS), and results are compared with wind tunnel measurements. When the amplitude of incoming crossflow (CF) perturbation is relatively low, transition in the reference (without hump) case occurs near $53\,\%$ chord, triggered by the breakdown of type I secondary instability. Under the same conditions, no transition is observed in the hump case within the DNS domain, which extends to $69\,\%$ chord. The analysis reveals a reversal in the CF velocity component downstream of the hump’s apex. Within this region, the structure and orientation of CF perturbations are linearly altered, particularly near the wall. These perturbations gradually recover their original state further downstream. During this recovery phase, the lift-up mechanism is weakened, reducing linear production, which stabilises the stationary CF perturbations and weakens spanwise gradients. Consequently, the neutral point of high-frequency secondary CF instability modes shifts downstream relative to the reference case, leading to laminar–turbulent transition delay in the presence of the surface hump. In contrast, when the amplitude of the incoming CF perturbation is relatively high, a pair of stationary counter-rotating vortices forms downstream of the hump. These vortices locally deform the boundary layer and generate regions of elevated spanwise shear. The growth of secondary instabilities in these high-shear regions leads to a rapid advancement of transition towards the hump, in agreement with experimental observations.- 9 February 2026
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1028
Open AccessDirect numerical simulation of the effects of a smooth surface hump on transition in swept-wing boundary layers
The effect of a smooth surface hump on laminar–turbulent transition over a swept wing is investigated using direct numerical simulation (DNS), and results are compared with wind tunnel measurements. When the amplitude of incoming crossflow (CF) perturbation is relatively low, transition in the reference (without hump) case occurs near $53\,\%$ chord, triggered by the breakdown of type I secondary instability. Under the same conditions, no transition is observed in the hump case within the DNS domain, which extends to $69\,\%$ chord. The analysis reveals a reversal in the CF velocity component downstream of the hump’s apex. Within this region, the structure and orientation of CF perturbations are linearly altered, particularly near the wall. These perturbations gradually recover their original state further downstream. During this recovery phase, the lift-up mechanism is weakened, reducing linear production, which stabilises the stationary CF perturbations and weakens spanwise gradients. Consequently, the neutral point of high-frequency secondary CF instability modes shifts downstream relative to the reference case, leading to laminar–turbulent transition delay in the presence of the surface hump. In contrast, when the amplitude of the incoming CF perturbation is relatively high, a pair of stationary counter-rotating vortices forms downstream of the hump. These vortices locally deform the boundary layer and generate regions of elevated spanwise shear. The growth of secondary instabilities in these high-shear regions leads to a rapid advancement of transition towards the hump, in agreement with experimental observations. - Open Access
- 15 May 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1011, A27
Self-excited instability and transition to turbulence in laminar separation bubbles induced by surface waviness
The instability characteristics and laminar–turbulent transition of a series of laminar separation bubbles (LSBs) formed due to a single sinusoidal surface waviness are investigated in the absence of external disturbances or forcing. A scaling based on the geometrical parameters of the waviness and flow Reynolds number is found that enables the prediction of flow separation on the wall leeward side. The analysis of three-dimensional instabilities of two-dimensional base flows reveals a relation between the number of changes in the curvature sign of the recirculating streamlines and the number of unstable centrifugal modes that coexist for the same flow. When multiple curvature changes occur, in addition to the usual steady mode reported for two-dimensional recirculation bubbles, a new self-excited mode with a higher growth rate emerges, localised near the highest streamline curvature, close to the reattachment point. A detailed analysis of the mode growth and saturation using DNS reveals that the localised mode only disturbs the LSB locally, while the usual one leads to a global distortion of the bubble in the spanwise direction; this has a distinctive impact on the self-excited secondary instabilities. Then, the complete transition scenario is studied for two selected LSB cases. The first one only presents an unstable eigenmode, namely the usual centrifugal mode in recirculating flows. The second case presents three unstable eigenmodes: two centrifugal eigenmodes (the usual and the localised ones) and a two-dimensional eigenmode associated with the self-sustained Kelvin–Helmholtz waves. These results show how completely different transition scenarios can emerge from subtle changes in the LSB characteristics.
- 15 May 2025
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 1011, A27
Open AccessSelf-excited instability and transition to turbulence in laminar separation bubbles induced by surface waviness
The instability characteristics and laminar–turbulent transition of a series of laminar separation bubbles (LSBs) formed due to a single sinusoidal surface waviness are investigated in the absence of external disturbances or forcing. A scaling based on the geometrical parameters of the waviness and flow Reynolds number is found that enables the prediction of flow separation on the wall leeward side. The analysis of three-dimensional instabilities of two-dimensional base flows reveals a relation between the number of changes in the curvature sign of the recirculating streamlines and the number of unstable centrifugal modes that coexist for the same flow. When multiple curvature changes occur, in addition to the usual steady mode reported for two-dimensional recirculation bubbles, a new self-excited mode with a higher growth rate emerges, localised near the highest streamline curvature, close to the reattachment point. A detailed analysis of the mode growth and saturation using DNS reveals that the localised mode only disturbs the LSB locally, while the usual one leads to a global distortion of the bubble in the spanwise direction; this has a distinctive impact on the self-excited secondary instabilities. Then, the complete transition scenario is studied for two selected LSB cases. The first one only presents an unstable eigenmode, namely the usual centrifugal mode in recirculating flows. The second case presents three unstable eigenmodes: two centrifugal eigenmodes (the usual and the localised ones) and a two-dimensional eigenmode associated with the self-sustained Kelvin–Helmholtz waves. These results show how completely different transition scenarios can emerge from subtle changes in the LSB characteristics.