Abdelkadir Makani
Research Subjects
Abdelkadir Makani has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Ahmed Tafraoui
Eco-materials: Innovations & Applications Laboratory, Civil Engineering Department, TAHRI Mohamed University, Bechar, ALGERIA
2 shared publications - Ahmed Tafraoui
Laboratory Eco-Materials Innovations and Applications EMIA (ex LFGM), University TAHRI Mohamed Bechar, Bechar, Algeria
1 shared publication - Ibtissam Boulahya
Department of Civil Engineering and Hydraulic EMIA ex LFGM (Laboratory of Eco-Materials: Innovations & Applications) TAHRI Mohamed University P.O. Box 417 ( 08000) Bechar Algeria
1 shared publication - Noureddine Agha
Laboratory of Eco-materials: Innovations & Applications (EMIA), Civil Engineering Department, TAHRI Mohamed University, Bechar, ALGERIA
1 shared publication - Rekia Zouini
EMIA) Laboratory of Eco-materials: Innovations & Applications, Civil Engineering Department TAHRI Mohamed University, P.O. Box 417 Bechar (08000), Algeria
1 shared publication - Said Zaouai
Laboratory of Eco-materials: Innovations & Applications (EMIA), Civil Engineering Department, University of Djelfa, 17000 Djelfa, Algeria
1 shared publication
Latest Publications
- Open Access
- 14 May 2024
- Published by Universidade Federal de Vicosa in The Journal of Engineering and Exact Sciences
- Vol. 10 (6) , 20203
Sustainable lightweight self-compacting concrete with coal bottom ash as aggregate and cement replacement
This study aims to examine the impact of utilizing coal bottom ash (CBA) sourced from an inactive power plant on the fresh and hardened properties of lightweight self-compacting concrete (LWSCC). To evaluate the workability of the LWSCC mixtures, slump flow, L-box, and sieve segregation tests were performed. The mechanical and physical properties were assessed through dry density, compressive strength and ultrasonic pulse velocity (UPV) tests. A total of five concrete mixes were developed: a control mix and four additional mixtures in which natural coarse aggregate was fully substituted with coal bottom ash aggregate (CCBA). Additionally, Portland cement was partially replaced with coal bottom ash powder (CBAP) at levels of 15%, 20%, and 25%. The results indicated that the use of CBA as a coarse aggregate enhanced the workability of LWSCC, though workability decreased as the proportion of CBAP increased. Nonetheless, the workability of all mixes remained compliant with the standards specified by the French Association of Civil Engineering (AFGC). Minimal variations in dry density and compressive strength were observed with the incorporation of CBA; however, these values remained within the acceptable limits for structural lightweight concrete. Furthermore, the UPV test demonstrated favorable durability for all LWSCC mixtures. Strong linear correlations were identified among the various measured properties, reinforcing the conclusion that CBA serves as an effective replacement for natural coarse aggregate. Moreover, the use of 15% CBAP as a partial substitute for Portland cement proved to be a feasible option for producing sustainable LWSCC.
- 14 May 2024
- Published by Universidade Federal de Vicosa in The Journal of Engineering and Exact Sciences
- Vol. 10 (6) , 20203
Open AccessSustainable lightweight self-compacting concrete with coal bottom ash as aggregate and cement replacement
This study aims to examine the impact of utilizing coal bottom ash (CBA) sourced from an inactive power plant on the fresh and hardened properties of lightweight self-compacting concrete (LWSCC). To evaluate the workability of the LWSCC mixtures, slump flow, L-box, and sieve segregation tests were performed. The mechanical and physical properties were assessed through dry density, compressive strength and ultrasonic pulse velocity (UPV) tests. A total of five concrete mixes were developed: a control mix and four additional mixtures in which natural coarse aggregate was fully substituted with coal bottom ash aggregate (CCBA). Additionally, Portland cement was partially replaced with coal bottom ash powder (CBAP) at levels of 15%, 20%, and 25%. The results indicated that the use of CBA as a coarse aggregate enhanced the workability of LWSCC, though workability decreased as the proportion of CBAP increased. Nonetheless, the workability of all mixes remained compliant with the standards specified by the French Association of Civil Engineering (AFGC). Minimal variations in dry density and compressive strength were observed with the incorporation of CBA; however, these values remained within the acceptable limits for structural lightweight concrete. Furthermore, the UPV test demonstrated favorable durability for all LWSCC mixtures. Strong linear correlations were identified among the various measured properties, reinforcing the conclusion that CBA serves as an effective replacement for natural coarse aggregate. Moreover, the use of 15% CBAP as a partial substitute for Portland cement proved to be a feasible option for producing sustainable LWSCC.
- Open Access
- 20 January 2023
- Published by Universidade Federal de Vicosa in The Journal of Engineering and Exact Sciences
- Vol. 9 (5) , 16062-01e
Investigation on the mechanical properties and durability of high performance concrete reinforced with waste tires fibers
This paper aims to evaluate the mechanical behavior and durability of high-performance concrete reinforced with steel fibers recycled from waste car tires at 1% and 2% volume fractions and 2 cm and 3 cm lengths. Compressive and flexural strength tests were conducted on confined cubic and prismatic specimens at 28 days of age, with ultrasonic testing performed to confirm concrete properties non-destructively. Additionally, immersing specimens in 5% HCl and MgSO4 solutions to study their resistance in aggressive environments assessed the durability of the concrete. The findings indicated that the incorporation of steel tire fibers had a positive impact on the flexural and compressive strength of the material. Furthermore, a distinct correlation was evident between the ultrasonic pulse velocity and both the compressive and flexural strength. Additionally, the high-performance concrete exhibited resistance to chemical reactions in aggressive environments.
- 20 January 2023
- Published by Universidade Federal de Vicosa in The Journal of Engineering and Exact Sciences
- Vol. 9 (5) , 16062-01e
Open AccessInvestigation on the mechanical properties and durability of high performance concrete reinforced with waste tires fibers
This paper aims to evaluate the mechanical behavior and durability of high-performance concrete reinforced with steel fibers recycled from waste car tires at 1% and 2% volume fractions and 2 cm and 3 cm lengths. Compressive and flexural strength tests were conducted on confined cubic and prismatic specimens at 28 days of age, with ultrasonic testing performed to confirm concrete properties non-destructively. Additionally, immersing specimens in 5% HCl and MgSO4 solutions to study their resistance in aggressive environments assessed the durability of the concrete. The findings indicated that the incorporation of steel tire fibers had a positive impact on the flexural and compressive strength of the material. Furthermore, a distinct correlation was evident between the ultrasonic pulse velocity and both the compressive and flexural strength. Additionally, the high-performance concrete exhibited resistance to chemical reactions in aggressive environments.
- Open Access
- 20 January 2023
- Published by Universidade Federal de Vicosa in The Journal of Engineering and Exact Sciences
- Vol. 9 (5) , 16002-01e
Improving the physical and mechanical properties new concrete containing crushed dune sand and demolition waste as coarse aggregate
- 20 January 2023
- Published by Universidade Federal de Vicosa in The Journal of Engineering and Exact Sciences
- Vol. 9 (5) , 16002-01e
Open AccessImproving the physical and mechanical properties new concrete containing crushed dune sand and demolition waste as coarse aggregate