ATAhmed Tafraoui

Ahmed Tafraoui

*This is an algorithmically generated author record based on publicly available information.

Ahmed Tafraoui has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical study of cellular beams under different types of loading

    by Bekkar Izzeddine, Baraka Abdelhak, Bounoua Tab, Tafraoui Ahmed

    The integration of cellular metal beams in high-rise buildings allows for optimized space utilization for technical equipment, while also reducing floor height and, consequently, the overall weight of the superstructure. However, while these openings provide design flexibility, they can also decrease structural stability by causing deformations in the web posts, especially under concentrated loads. This study focuses on evaluating the strength and stability of open-section beams under various load conditions, using numerical simulations and three-point bending tests. Specific reinforcement solutions were developed to counter instability phenomena and enhance mechanical performance. The results indicate that the finite element model used in simulations provides accurate and consistent predictions with experimental data, validating its utility for in-depth analysis of displacements and failure modes. Notably, the addition of stiffeners proved effective in reducing displacements and enhancing beam stability. This work, still in its exploratory phase, aims to develop a theoretical formula to estimate the contribution of supports to elastic stiffness, paving the way for advances in the use of reinforced metal beams in high-rise construction.

  • Open Access

    Thermal analysis of mortar based on crushed dune sand

    by Boudjemaa Mebarki, Ahmed Tafraoui, Abdelkadir Makani

    This study investigates the thermal decomposition behavior of mortars formulated using crushed dune sand and thixotropic polyester resin. Thermal analysis techniques, including Differential Scanning Calorimetry (DSC), Differential Thermal Analysis (DTA), and Gravimetric Thermal Analysis (GTA), were employed to characterize the thermal transitions, decomposition stages, and stability of these mortars. Results indicate that crushed dune sand maintains consistent glass transition (Tg) and crystallization temperatures (Tc) when integrated into the mortar matrix, highlighting its thermal stability. However, the melting point (Tm) varies due to the presence of the resin, which significantly influences the composite’s thermal behavior. Decomposition analysis reveals two major weight loss stages: water evaporation between 200°C to 400°C and organic decomposition of the resin between 700°C to 800°C, with minimal weight change beyond 800°C, indicating thermal stability. The DTA results exhibit distinct endothermic reactions related to dehydration and dehydroxylation, along with a pronounced exothermic peak around 400°C, signifying resin decomposition. Elemental analysis confirms that the crushed dune sand is predominantly silica with minimal impurities, making it suitable for construction applications. This research contributes to a deeper understanding of the thermal behavior of polymer-modified mortars, with implications for enhancing thermal and mechanical properties in construction materials.


  • Open Access

    Sustainable lightweight self-compacting concrete with coal bottom ash as aggregate and cement replacement

    by Ibtissam Boulahya, Abdelkadir Makani, Ahmed Tafraoui

    This study aims to examine the impact of utilizing coal bottom ash (CBA) sourced from an inactive power plant on the fresh and hardened properties of lightweight self-compacting concrete (LWSCC). To evaluate the workability of the LWSCC mixtures, slump flow, L-box, and sieve segregation tests were performed. The mechanical and physical properties were assessed through dry density, compressive strength and ultrasonic pulse velocity (UPV) tests. A total of five concrete mixes were developed: a control mix and four additional mixtures in which natural coarse aggregate was fully substituted with coal bottom ash aggregate (CCBA). Additionally, Portland cement was partially replaced with coal bottom ash powder (CBAP) at levels of 15%, 20%, and 25%. The results indicated that the use of CBA as a coarse aggregate enhanced the workability of LWSCC, though workability decreased as the proportion of CBAP increased. Nonetheless, the workability of all mixes remained compliant with the standards specified by the French Association of Civil Engineering (AFGC). Minimal variations in dry density and compressive strength were observed with the incorporation of CBA; however, these values remained within the acceptable limits for structural lightweight concrete. Furthermore, the UPV test demonstrated favorable durability for all LWSCC mixtures. Strong linear correlations were identified among the various measured properties, reinforcing the conclusion that CBA serves as an effective replacement for natural coarse aggregate. Moreover, the use of 15% CBAP as a partial substitute for Portland cement proved to be a feasible option for producing sustainable LWSCC.

  • Open Access

    Investigation on the mechanical properties and durability of high performance concrete reinforced with waste tires fibers

    by Rekia Zouini, Abdelkadir Makani, Ahmed Tafraoui

    This paper aims to evaluate the mechanical behavior and durability of high-performance concrete reinforced with steel fibers recycled from waste car tires at 1% and 2% volume fractions and 2 cm and 3 cm lengths. Compressive and flexural strength tests were conducted on confined cubic and prismatic specimens at 28 days of age, with ultrasonic testing performed to confirm concrete properties non-destructively. Additionally, immersing specimens in 5% HCl and MgSO4 solutions to study their resistance in aggressive environments assessed the durability of the concrete. The findings indicated that the incorporation of steel tire fibers had a positive impact on the flexural and compressive strength of the material. Furthermore, a distinct correlation was evident between the ultrasonic pulse velocity and both the compressive and flexural strength. Additionally, the high-performance concrete exhibited resistance to chemical reactions in aggressive environments.