João Batista Marques de Sousa Junior
Research Subjects
João Batista Marques de Sousa Junior has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Elias Saraiva Barroso
Universidade Federal do Ceará
2 shared publications - Evandro Parente
Universidade Federal do Ceará
2 shared publications - Beatriz M. Meneses
Dept. Structural Engineering, Federal University of Ceará
1 shared publication - Joaquim Bento Cavalcante Neto
Systems and Databases Laboratory, Federal University of Ceará
1 shared publication - Matheus Pascoal Martins de Sousa
UFC - Universidade Federal do Ceará
1 shared publication - Pedro Ygor Rodrigues Mesquita
UFC - Universidade Federal do Ceará
1 shared publication
Latest Publications
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Contributions to the analysis of prestressed steel and concrete composite beams using machine learning algorithms
In the practice of civil construction, one of the structural alternatives used so that beams can withstand the required loads in a more efficient and economical way are the prestressed composite beams, especially steel and reinforced concrete. Posttensioned composite steel-concrete beams (PSCCB) have a greater range of elastic behavior, as well as yield and ultimate load values. In continuous beams, there is a reduction of cracking in the hogging moment region. They may also have better fatigue performance and employ lighter steel sections. The present paper aims to create a large database for the analysis of PSCCB, based on a previously developed nonlinear finite element model, which performs static non-linear analysis of PSCCB’s, considering the partial interaction between steel and concrete. With a database developed from a variation of the parameters in the numerical models, three Machine Learning models are developed and trained with the objective of predicting the beam ultimate load, deflection, and final tendon force. The implemented procedures is compared, whenever possible, with experimental and numerical results available in classic literature, mainly as a reference of test data to evaluate the success of Machine Learning algorithms.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessContributions to the analysis of prestressed steel and concrete composite beams using machine learning algorithms
In the practice of civil construction, one of the structural alternatives used so that beams can withstand the required loads in a more efficient and economical way are the prestressed composite beams, especially steel and reinforced concrete. Posttensioned composite steel-concrete beams (PSCCB) have a greater range of elastic behavior, as well as yield and ultimate load values. In continuous beams, there is a reduction of cracking in the hogging moment region. They may also have better fatigue performance and employ lighter steel sections. The present paper aims to create a large database for the analysis of PSCCB, based on a previously developed nonlinear finite element model, which performs static non-linear analysis of PSCCB’s, considering the partial interaction between steel and concrete. With a database developed from a variation of the parameters in the numerical models, three Machine Learning models are developed and trained with the objective of predicting the beam ultimate load, deflection, and final tendon force. The implemented procedures is compared, whenever possible, with experimental and numerical results available in classic literature, mainly as a reference of test data to evaluate the success of Machine Learning algorithms.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
A NURBS-based isogeometric formulation for geometrically nonlinear analysis of shells
Due to their high slenderness, shell structures are vulnerable to collapse caused by loss of stability, hence nonlinear analysis is crucial to ensure a safe design. The advantage of isogeometric analysis (IGA) to exactly describe the geometry of the problem independently of the degree of discretization and allow easy refinements has led to its increasing application in shell analysis. However, IGA does not remove the shear and membrane locking presented by fully integrated shell elements based on Reissner-Mindlin's theory. Thus, several alternatives have been proposed in the literature to solve the locking problem, such as mixed formulation and reduced integration. This work aims to study the effectiveness of different reduced integration schemes to eliminate or alleviate locking in the context of stability and geometrically nonlinear analysis of Reissner-Mindlin shells based on the degenerated solid approach. The proposed formulation is applied to the stability analysis of plates and shells, where critical loads and nonlinear equilibrium paths are evaluated and compared to solutions available in the literature or obtained by the Finite Element Method. Excellent results were obtained, demonstrating that a very accurate and efficient approach for nonlinear analysis of plates and shells can be achieved by using high regularity basis functions obtained by k-refinement and an appropriate reduced integration scheme. This approach not only avoids locking but also reduces the computational cost of nonlinear analysis of shells.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessA NURBS-based isogeometric formulation for geometrically nonlinear analysis of shells
Due to their high slenderness, shell structures are vulnerable to collapse caused by loss of stability, hence nonlinear analysis is crucial to ensure a safe design. The advantage of isogeometric analysis (IGA) to exactly describe the geometry of the problem independently of the degree of discretization and allow easy refinements has led to its increasing application in shell analysis. However, IGA does not remove the shear and membrane locking presented by fully integrated shell elements based on Reissner-Mindlin's theory. Thus, several alternatives have been proposed in the literature to solve the locking problem, such as mixed formulation and reduced integration. This work aims to study the effectiveness of different reduced integration schemes to eliminate or alleviate locking in the context of stability and geometrically nonlinear analysis of Reissner-Mindlin shells based on the degenerated solid approach. The proposed formulation is applied to the stability analysis of plates and shells, where critical loads and nonlinear equilibrium paths are evaluated and compared to solutions available in the literature or obtained by the Finite Element Method. Excellent results were obtained, demonstrating that a very accurate and efficient approach for nonlinear analysis of plates and shells can be achieved by using high regularity basis functions obtained by k-refinement and an appropriate reduced integration scheme. This approach not only avoids locking but also reduces the computational cost of nonlinear analysis of shells.
- Open Access
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Shell Analysis Using a Solid-Shell Approach
Shells are curved three-dimensional structures whose thickness is much smaller than their other two dimensions. They can be found in various sectors, such as aerospace, energy, naval and civil engineering. There are several structural theories in the literature to deal with this type of structure, such as Kirchhoff-Love, Reissner-Mindlin and Higher-order theories. However, these theories are based on assumptions that require rotational degrees of freedom in their kinematic description, making the problem complex, especially for geometrically nonlinear analysis, since large 3D rotations are not additive. Furthermore, in shell theories, it is usually assumed that there is no thickness stretching. In other words, the normal transversal strain is neglected, so it is not possible to use full 3D constitutive models for the analysis. With this in mind, the structural modeling in this work will be based on the solid-shell approach, which uses a 3D mesh with only one element through the thickness and does not require rotational degrees of freedom in the kinematic description, like in solid elements, but with a lower computational cost. Its formulation considers the general stress state, so a complete 3D constitutive relation is assumed. The use of this theory in structural problems results in partial differential equations whose analytical solutions are very complex or impossible to obtain, thus requiring the use of numerical methods to obtain approximate results. The presented formulation can be applied to develop isoparametric and isogeometric solid-shell elements. The performance of linear and quadratic elements is assessed using numerical examples.
- 2 December 2024
- Published by Softaliza Tecnologias LTDA in Ibero-Latin American Congress on Computational Methods in Engineering (CILAMCE)
Open AccessShell Analysis Using a Solid-Shell Approach
Shells are curved three-dimensional structures whose thickness is much smaller than their other two dimensions. They can be found in various sectors, such as aerospace, energy, naval and civil engineering. There are several structural theories in the literature to deal with this type of structure, such as Kirchhoff-Love, Reissner-Mindlin and Higher-order theories. However, these theories are based on assumptions that require rotational degrees of freedom in their kinematic description, making the problem complex, especially for geometrically nonlinear analysis, since large 3D rotations are not additive. Furthermore, in shell theories, it is usually assumed that there is no thickness stretching. In other words, the normal transversal strain is neglected, so it is not possible to use full 3D constitutive models for the analysis. With this in mind, the structural modeling in this work will be based on the solid-shell approach, which uses a 3D mesh with only one element through the thickness and does not require rotational degrees of freedom in the kinematic description, like in solid elements, but with a lower computational cost. Its formulation considers the general stress state, so a complete 3D constitutive relation is assumed. The use of this theory in structural problems results in partial differential equations whose analytical solutions are very complex or impossible to obtain, thus requiring the use of numerical methods to obtain approximate results. The presented formulation can be applied to develop isoparametric and isogeometric solid-shell elements. The performance of linear and quadratic elements is assessed using numerical examples.