MFMatteo Folcarelli

Matteo Folcarelli

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Matteo Folcarelli has a total of 143 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Background of the BULLKID detector array operated with a moderate shield on the surface

    by D. Delicato, A. Acevedo-Rentería, M. Folcarelli, G. Del Castello, M. Cappelli, L. E. Ardila-Perez, L. Bandiera, C. Bonomo, M. Calvo, R. Caravita, et al.

    We present the operation with moderate radiation shield in a surface laboratory of BULky and Low-threshold Kinetic Inductance Detector) (BULLKID), a cryogenic detector for searches of light dark matter or coherent elastic neutrino-nucleus scattering. The detector consists of an array of 60 cubic silicon particle absorbers of 0.34 g each, sensed by cryogenic kinetic inductance detectors. The analysis presented focuses on data from 15 elements of the array, with two central units used to evaluate the background and with their surrounding elements used as veto. The low energy spectrum resulting from an exposure of 290 hours to ambient backgrounds, acquired with the use of external and internal radiation shields, is compatible with the simulations at the level of ( 6.8 ± 0.4 stat . ± 0.1 syst . ) × 10 4 counts / keV kg days from 2 keV down to an energy of 600 eV. The region between 225 eV and 600 eV shows a rise in background in disagreement with the simulations, while not sharing some of the key traits of the low energy excess observed in other cryogenic experiments. The high energy spectrum shape is in overall agreement with the simulations and displays the typical particle-induced x-ray emission of the surrounding lead.

  • Open Access

    The RFSoC-based electronics readout system for the BULLKID-DM experiment: sub-GeV dark matter detection with MKIDs

    by L.E. Ardila-Perez, T. Muscheid, R. Gartmann, D. Crovo, A. Cruciani, M. De Lucia, G. Del Castello, D. Delicato, M. Folcarelli, T. Lari, et al.

    We present the readout and data acquisition (DAQ) system for BULLKID-DM, a cryogenic dark-matter experiment employing Kinetic Inductance Detectors (KIDs) to probe below 1 GeV dark matter candidates. The system is built around an AMD RFSoC (ZCU216) platform that synthesizes densely spaced probe tones, performs frequency demultiplexing and amplitude demodulation, and executes real-time triggering and background suppression across up to 16 readout lines with 145 resonators per line in the 700 MHz to 950 MHz band. A fully automated calibration flow integrates vector-network-analyzer (VNA) functionality, resonator-circle acquisition with in-firmware phase rotation for maximum trigger sensitivity, and an energy calibration scheme based on LED illumination via a mezzanine board on the FMC+ connector. We summarize architecture, firmware, preliminary phase-noise studies, and the status of the detector demonstrator. The system is ready for scale-up to the full BULLKID-DM detector at the Laboratori Nazionali del Gran Sasso (LNGS).

  • Enhanced athermal phonon responsivity in a kinetic inductance detector with integrated phonon collectors

    by L. Pesce, A. L. De Santis, M. Calvo, M. Cappelli, U. Chowdhury, A. Cruciani, G. Del Castello, D. Delicato, M. Folcarelli, M. del Gallo Roccagiovine, et al.

    Cryogenic phonon detectors are adopted in light dark matter searches and coherent elastic neutrino-nucleus scattering experiments as they can achieve low energy thresholds. The phonon-mediated sensing of silicon particle absorbers has already been proved with kinetic inductance detectors (KIDs), acting both as sensors and athermal phonon absorbers. In this work, we present the design and the performance of an improved detector design. In this architecture, the KID acts only as a sensor and is coupled to dedicated phonon collectors. When a signal is coming from the substrate, the presence of a separated collector allows to detect a higher increase in quasi-particle density, thereby enhancing its responsivity. The meander of the KID is composed of a 77 nm trilayer wire of aluminum–titanium–aluminum, while the phonon collectors are made of a 100 nm aluminum layer and act as quasi-particle funnels. Inside the collectors, the absorbed athermal phonons generate quasi-particles, which, after diffusion, are trapped in the lower-gap superconducting trilayer. The performance of this setup is compared to that of a standard phonon-mediated KID, showing an increased phonon collection efficiency by a factor of around 7.


  • Open Access

    Energy calibration of bulk events in the BULLKID detector

    by M. Folcarelli, D. Delicato, A. Acevedo-Rentería, L. E. Ardila-Perez, L. Bandiera, M. Calvo, M. Cappelli, R. Caravita, F. Carillo, U. Chowdhury, et al.

    BULLKID is a cryogenic, solid-state detector designed for direct searches of particle Dark Matter candidates, with mass $$\lesssim 1$$ ≲ 1 GeV/c $$^2$$ 2 , and coherent neutrino-nucleus scattering. It is based on an array of dice carved in 5 mm thick silicon crystal, sensed by phonon-mediated Kinetic Inductance Detectors. In previous works, the array was calibrated with bursts of optical photons, which are absorbed in the first hundreds nanometers of the dice and give rise to surface events. In this work, we present the reconstruction of bulk events through the 59.5 keV $$\gamma $$ γ -ray generated by an $$^{241}$$ 241 Am source, which emulates more closely the interaction of Dark Matter and neutrinos. The peak resolution is $$5\%~(\sigma )$$ 5 % ( σ ) and its position is shifted by less than $$10\%$$ 10 % with respect to the optical calibration. We observe that the resolution is further improved by a factor 2 combining the signal from neighboring dice. These results confirm the performance of the detector in view of the physics goals of the BULLKID-DM experiment for dark matter search.


  • Open Access

    Projected sensitivity to light WIMP-like particles of the BULLKID-DM experiment

    by Matteo Folcarelli, A. Acevedo-Rentería, L. E. Ardila-Perez, L. Bandiera, M. Calvo, M. Cappelli, R. Caravita, F. Carillo, U. Chowdhury, D. Crovo, et al.

    BULLKID-DM is an experiment designed for the direct searches of particle dark matter candidates with mass around 1 GeV, or below, and cross-section with nucleons smaller than $10^{-40}$ cm$^2$. The detector consists of a stack of diced silicon wafers, acting as arrays of particle absorbers, sensed by multiplexed Kinetic Inductance Detectors. The target will amount to 800 g subdivided in more than 2000 silicon dice, with the aim of controlling the background from natural radioactivity by creating a fully active structure and by applying fiducialization techniques. In this work we present the projected sensitivity of BULLKID-DM to light WIMP-like particles considering also the other future experiments in the field.

  • Open Access

    Bayesian network 3D event reconstruction in the Cygno optical TPC for dark matter direct detection

    by Fernando Amaro, Rita Antonietti, Elisabetta Baracchini, Luigi Benussi, Stefano Bianco, Francesco Borra, Cesidio Capoccia, Michele Caponero, Gianluca Cavoto, Igor Costa, et al.

    The CYGNO experiment is developing a high-resolution gaseous Time Projection Chamber with optical readout for directional dark matter searches. The detector uses a helium-tetrafluoromethane (He:CF $$_4$$ 4 60:40) gas mixture at atmospheric pressure and a triple Gas Electron Multiplier amplification stage, coupled with a scientific camera for high-resolution 2D imaging and fast photomultipliers for time-resolved scintillation light detection. This setup enables 3D event reconstruction: photomultiplier signals provide depth information, while the camera delivers high-precision transverse resolution. In this work, we present a Bayesian Network-based algorithm designed to reconstruct the events using only the photomultiplier signals, inferring a 3D description of the particle trajectories. The algorithm models the light collection process probabilistically and estimates spatial and intensity parameters on the Gas Electron Multiplier plane, where light emission occurs. It is implemented within the Bayesian Analysis Toolkit and uses Markov Chain Monte Carlo sampling for posterior inference. Validation using data from the CYGNO LIME prototype shows accurate reconstruction of localized and extended straight tracks. Results demonstrate that the Bayesian approach enables robust 3D description and, when combined with camera data, opens the way to future improvements in spatial and energy resolution. This methodology represents a significant step forward in directional dark matter detection, enhancing the identification of nuclear recoil tracks with high spatial resolution.


  • Open Access

    Energy calibration of bulk events in the BULLKID detector

    by M. Folcarelli, D. Delicato, A. Acevedo-Rentería, L. E. Ardila-Perez, L. Bandiera, M. Calvo, M. Cappelli, R. Caravita, F. Carillo, U. Chowdhury, et al.

    BULLKID is a cryogenic, solid-state detector designed for direct searches of particle Dark Matter candidates, with mass $\lesssim 1$ GeV/c$^2$, and coherent neutrino-nucleus scattering. It is based on an array of dice carved in 5 mm thick silicon crystal, sensed by phonon-mediated Kinetic Inductance Detectors. In previous works, the array was calibrated with bursts of optical photons, which are absorbed in the first hundreds nanometers of the dice and give rise to surface events. In this work, we present the reconstruction of bulk events through the 59.5 keV $γ$-ray generated by an $^{241}$Am source, which emulates more closely the interaction of Dark Matter and neutrinos. The peak resolution is $5\%~(σ)$ and its position is shifted by less than $10\%$ with respect to the optical calibration. We observe that the resolution is further improved by a factor $2$ combining the signal from neighboring dice. These results confirm the performance of the detector in view of the physics goals of the BULLKID-DM experiment for dark matter search.

  • Germanium target sensed by phonon-mediated kinetic inductance detectors

    by D. Delicato, D. Angelone, L. Bandiera, M. Calvo, M. Cappelli, U. Chowdhury, G. Del Castello, M. Folcarelli, M. del Gallo Roccagiovine, V. Guidi, et al.

    Cryogenic phonon detectors are adopted in experiments searching for dark matter interactions or coherent elastic neutrino-nucleus scattering, thanks to the low energy threshold they can achieve. The phonon-mediated sensing of particle interactions in passive silicon absorbers has been demonstrated with kinetic inductance detectors (KIDs). Targets with neutron number larger than silicon, however, feature a higher cross section to neutrinos, while multi-target absorbers in the dark matter experiments would provide a stronger evidence of a possible signal. In this work, we present the design, fabrication, and operation of KIDs coupled to a germanium absorber, achieving phonon-sensing performance comparable to silicon absorbers. The device introduced in this work is a proof of concept for a scalable neutrino detector and for a multi-target dark matter experiment.