SZSerhii Zolotarenko

Serhii Zolotarenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Serhii Zolotarenko has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical modeling of aeroacoustic processes during the flow around wind turbine blade segments

    by Serhii Aleksieienko, Liliya Nakashydze, Serhii Zolotarenko

    The paper presents a numerical methodology for studying aeroacoustic processes that occur during flow around wind turbine blade segments. The methodology is based on solving the compressible Navier – Stokes equations using the large eddy simulation (LES) method for accurate modeling of turbulent flows, which allows taking into account the complex interaction of hydrodynamic and acoustic phenomena. The proposed approach consists in applying the direct acoustic method (DAS) for detailed analysis of the near field and the Fawkes Williams – Hawkings (FW-H) analogy for effective prediction of noise in the far field. To verify the methodology, numerical experiments were conducted for the NACA0012 airfoil in transient flow regimes. Key flow features are reproduced, such as boundary layer separation, formation of separation zones, transition of the boundary layer to a turbulent state with reattachment to the streamlined surface, formation of vortex structures and their interaction with the trailing edge as the main source of aerodynamic noise. A comparison of the obtained distribution of acoustic characteristics in the near field with known calculation data is presented. The noise characteristics of the NACA0012 profile in the near field were studied using the DAS method, establishing a connection between the aerodynamic features of the flow and the mechanism of acoustic fluctuations generation. The noise characteristics in the far field were also studied using the FW-H analogy. Spectral analysis, performed based on the fast Fourier transform algorithm, demonstrated the agreement of the obtained tonal noise frequencies obtained by the DAS and FW-H methods, as well as correlation with known experimental data. The developed methodology is an effective tool for studying noise generation mechanisms and can be applied in creating low-noise designs of wind turbine blades.

  • Open Access

    AERODYNAMIC NOISE OF A BLADE SEGMENT WITH A MODIFIED SERRATED TRAILING EDGE

    by Serhii Zolotarenko

    AERODYNAMIC NOISE OF A BLADE SEGMENT WITH A MODIFIED SERRATED TRAILING EDGE AERODYNAMIC NOISE OF A BLADE SEGMENT WITH A MODIFIED SERRATED TRAILING EDGE ≡ Human and space

  • Open Access

    Effect of wind turbine blade trailing edge modification on aerodynamic noise

    by Serhii Aleksieienko, Andrii Dreus, Lilia Nakashydze, Vitalii Derbaba, Serhii Zolotarenko

    This study investigates acoustic processes that occur during the flow of air around the blade segment of a wind turbine. The issue of aerodynamic noise generated by wind turbines is one of the factors that hinders the widespread implementation of wind turbines. Noise reduction is possible by changing the design of the turbine blade to influence the aerodynamic processes during the flow of air around it. This paper reports an experimental study on the possibility of reducing the aerodynamic noise of wind turbines by modifying the trailing edge of the blade. An original methodology of acoustic experiments in an anechoic chamber is described; the results of experimental studies are given. Two different modifications of serrated trailing edges of the blade with the NACA0012 aerodynamic profile have been considered: a flat serrated edge and a three-dimensional serrated edge. The results from aerodynamic noise measurements of the prototypes of the blade segments were compared with the noise from the basic original sample. Acoustic measurements were carried out in the range of flow speeds: 7.5–20 m/s and angles of attack 0–15°. The results demonstrated that both configurations of the serrated trailing edge make it possible to reduce the level of aerodynamic noise compared to the base segment. It was found that the noise reduction occurs at relatively small angles of attack (0–5°) and moderate flow speeds (up to 15 m/s). In the specified range of parameters, the reduction of aerodynamic noise occurred due to a decrease in the sound pressure level in a certain frequency range by up to 4 dB. The segment with flat serrations turned out to be somewhat more effective in terms of noise reduction in the low-frequency range. Results of this work could be used when designing new generation wind energy systems with reduced noise levels, as well as other aerodynamic devices.

  • Methodology of the acoustic experiment for studying the aerodynamic noise of wind turbine blade segments

    by S. V Aleksieienko, A. Yu Dreus, L. V Nakashydze, V. A Derbaba, S. A Zolotarenko

    Purpose. This work focuses on developing and implementing the methodology for studying the aerodynamic noise generated by the rotor of a wind turbine. The acoustic characteristics of this noise are analyzed using a blade segment with NACA0012 airfoil. The study addresses the ongoing challenge of reducing wind turbine noise in renewable energy systems. Methodology. The aerodynamic noise of a wind turbine blade segment was experimentally investigated under laboratory conditions in an anechoic chamber. The measurement procedure complies with the national standard DSTU GOST ISO 5725-1:2005. Findings. The paper provides a brief overview of existing approaches to studying aerodynamic noise from wind turbines and presents a custom-designed experimental setup for studying acoustic noise characteristics of blade segments in an anechoic chamber. A method is proposed for analyzing both the acoustic signals of interest and the background noise components. Sound pressure levels were measured, and spectral characteristics of the noise generated by the blade segment with NACA0012 airfoil were analyzed in the presence of background noise. The method demonstrated effective operability for laboratory-based acoustic studies. Originality. The proposed method represents an original approach that differs from the traditional ones, in which test sections are integrated into an anechoic acoustic environment. Unlike conventional methods that assume a stationary model position and reversed flow conditions, this setup simulates the rotational motion of the blade airfoil. This enables a more realistic replication of operational rotor conditions and yields experimental data that better reflect actual aerodynamic noise behavior. Practical value. The developed methodology and experimental setup are applicable to parametric studies of various blade profiles to identify noise-reducing blade modifications. The results are also valuable for validating numerical models of aerodynamic noise prediction for turbine blades.


  • Open Access

    INVESTIGATION OF AERODYNAMIC NOISE OF THE NACA0012 AIRFOIL AT LOW REYNOLDS NUMBERS

    by Dnipro University of Technology, Serhii Zolotarenko

    INVESTIGATION OF AERODYNAMIC NOISE OF THE NACA0012 AIRFOIL AT LOW REYNOLDS NUMBERS INVESTIGATION OF AERODYNAMIC NOISE OF THE NACA0012 AIRFOIL AT LOW REYNOLDS NUMBERS ≡ Human and space