Yangwei Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yangwei Zhou has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Huayu Li
National Key Laboratory of Electromagnetic Energy, Naval University of Engineering, Wuhan, China
5 shared publications - Jun Sun
Naval University of Engineering, Wuhan 430033, China
5 shared publications - Lin Song
National Key Laboratory of Electromagnetic Energy, Naval University of Engineering, Wuhan, China
5 shared publications - Ziling Nie
National Key Laboratory of Electromagnetic Energy, Naval University of Engineering, Wuhan, China
5 shared publications - Li Peng
State Key Laboratory of Advanced Electromagnetic Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
4 shared publications - Xudong Zou
Huazhong University of Science and Technology
4 shared publications
Latest Publications
- 20 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. PP (21686777) , 1
Quantitative Observability of PMSM Inductance Estimation: A Unified Multiscale Framework
The convergence stability and accuracy of PMSM parameter estimation are fundamentally governed by model observability. While fundamental-frequency approaches are established, the theoretical observability of emerging models relying on high-frequency current derivative information remains largely unexplored. This paper proposes a real-time quantitative framework for evaluating the observability of PMSM parameter-estimation basis models within a unified multiscale perspective. The proposed method introduces a condition-number-based metric derived from the information matrix, enabling real-time assessment of model excitation and conditioning. Most existing parameter estimation methods are summarized into three basis models, the fundamental-frequency time-scale model (FFTM), the switching-time-scale full model (STFM), and the virtual voltage vector model (VVVM). These models are comparatively analyzed within this framework. Analytical results reveal the excitation-dependent conditioning characteristics of each model and identify their weakly observable conditions. An adaptive observer guided by the proposed metric is utilized specifically to demonstrate the effectiveness of the observability assessment. Both numerical and experimental results confirm that the proposed criterion provides a reliable and real-time index for model observability evaluation and parameter-identification stability.
- 20 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. PP (21686777) , 1
Quantitative Observability of PMSM Inductance Estimation: A Unified Multiscale Framework
The convergence stability and accuracy of PMSM parameter estimation are fundamentally governed by model observability. While fundamental-frequency approaches are established, the theoretical observability of emerging models relying on high-frequency current derivative information remains largely unexplored. This paper proposes a real-time quantitative framework for evaluating the observability of PMSM parameter-estimation basis models within a unified multiscale perspective. The proposed method introduces a condition-number-based metric derived from the information matrix, enabling real-time assessment of model excitation and conditioning. Most existing parameter estimation methods are summarized into three basis models, the fundamental-frequency time-scale model (FFTM), the switching-time-scale full model (STFM), and the virtual voltage vector model (VVVM). These models are comparatively analyzed within this framework. Analytical results reveal the excitation-dependent conditioning characteristics of each model and identify their weakly observable conditions. An adaptive observer guided by the proposed metric is utilized specifically to demonstrate the effectiveness of the observability assessment. Both numerical and experimental results confirm that the proposed criterion provides a reliable and real-time index for model observability evaluation and parameter-identification stability.
- 14 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 9005013
Offline Measurement of PMSM Incremental Inductance via Geometric Fitting of Current Derivatives
Accurate incremental inductance maps of the d-and q-axes underpin model-based predictive control, sensorless operation, and fault diagnosis of permanent-magnet synchronous motors (PMSMs). This paper presents a non-invasive offline measurement technique that exploits the current-derivative transients naturally generated by inverter switching events. By reformulating the discrete switching model in a virtual-voltage-vector-oriented frame, the inductance measurement task becomes a rotor-angle-independent geometric fitting problem. A robust fitting solver with outlier rejection mitigates nonlinear effects such as sensor drift and noise. The method operates on a standard finite-control-set drive and requires no shaft lock, additional signal injection, or extra sensors, yet yields a full-range inductance map. Experimental results on an interior PMSM demonstrate that the calibrated inductance map is in close agreement with finite-element analysis, conforms to the IEEE Std 1812-2023 offline benchmark, and remains consistent with values obtained from a current-derivative-based online estimator.
- 14 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 9005013
Offline Measurement of PMSM Incremental Inductance via Geometric Fitting of Current Derivatives
Accurate incremental inductance maps of the d-and q-axes underpin model-based predictive control, sensorless operation, and fault diagnosis of permanent-magnet synchronous motors (PMSMs). This paper presents a non-invasive offline measurement technique that exploits the current-derivative transients naturally generated by inverter switching events. By reformulating the discrete switching model in a virtual-voltage-vector-oriented frame, the inductance measurement task becomes a rotor-angle-independent geometric fitting problem. A robust fitting solver with outlier rejection mitigates nonlinear effects such as sensor drift and noise. The method operates on a standard finite-control-set drive and requires no shaft lock, additional signal injection, or extra sensors, yet yields a full-range inductance map. Experimental results on an interior PMSM demonstrate that the calibrated inductance map is in close agreement with finite-element analysis, conforms to the IEEE Std 1812-2023 offline benchmark, and remains consistent with values obtained from a current-derivative-based online estimator.
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (1) , 1484-1493
A Rotor Position Estimation Method Based on Intrinsic Current Responses in Direct Torque Control for IPMSM
This article proposes a rotor position estimation method for direct torque controlled interior permanent magnet synchronous machine (IPMSM) drives. Intrinsic current responses caused by switching consecutive voltage vectors in direct torque control (DTC) are used to estimate the rotor position. Neither additional high-frequency (HF) signals injection nor control interruption for duty ratio modification are necessary. In the normal operation of IPMSM DTC drive, intrinsic current responses are often sufficiently high for measurement for the purpose of rotor position estimation. The machine is considered as a “rotor position sensor,” inputs and outputs of this sensor are inverter voltage vectors and the resulting current responses, respectively. By identifying the behavior between inputs and outputs of this sensor, the rotor position can be obtained. A predefined machine model is not required in this rotor position estimation method. In addition, filters, which can introduce delay and distortion, are not necessary in this estimator. The experimental results show that the proposed rotor position estimator preserves good steady-state and dynamic performances. The effectiveness of this rotor position estimator at different speed ranges, including zero speed, and for different loads is verified as well on an IPMSM drive.
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (1) , 1484-1493
A Rotor Position Estimation Method Based on Intrinsic Current Responses in Direct Torque Control for IPMSM
This article proposes a rotor position estimation method for direct torque controlled interior permanent magnet synchronous machine (IPMSM) drives. Intrinsic current responses caused by switching consecutive voltage vectors in direct torque control (DTC) are used to estimate the rotor position. Neither additional high-frequency (HF) signals injection nor control interruption for duty ratio modification are necessary. In the normal operation of IPMSM DTC drive, intrinsic current responses are often sufficiently high for measurement for the purpose of rotor position estimation. The machine is considered as a “rotor position sensor,” inputs and outputs of this sensor are inverter voltage vectors and the resulting current responses, respectively. By identifying the behavior between inputs and outputs of this sensor, the rotor position can be obtained. A predefined machine model is not required in this rotor position estimation method. In addition, filters, which can introduce delay and distortion, are not necessary in this estimator. The experimental results show that the proposed rotor position estimator preserves good steady-state and dynamic performances. The effectiveness of this rotor position estimator at different speed ranges, including zero speed, and for different loads is verified as well on an IPMSM drive.
- 28 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (1) , 700-712
A Position-Feedback-Free and Inverter-Nonlinearity-Immune Inductance Estimation Method for PMSM Drives Without Signal Injection
Accurate online maps of the incremental inductances Ld, Lq are critical to model-based drives, sensorless observers, and real-time fault diagnosis. Existing techniques either rely on slow, equipment-intensive offline tests or inject auxiliary signals that disturb the drive, depend on precise rotor position, and are difficult to calibrate against inverter nonlinearities. This paper sidesteps those limitations by recasting the fundamental voltage vector sequence as a differential virtual-voltage-vector that inherently rejects dead-time distortion and device voltage drops. A piece-wise multisample linear regression—applied only to the quasi-linear segment of each current trace—then yields a dead-time-immune, noise-resilient estimate of current slopes. The proposed approach introduces three mutually reinforcing advances: (i) a virtual-voltage-vector-oriented framework that inherently accounts for inverter non-linearities; (ii) a multi-sampling-based current-slope estimation strategy that is immune to dead-time effects and suppresses noise; and (iii) a signal-injection-free, rotor-position-independent inductance observer that is explicitly built on the first two advances, harnessing their accurate voltage modeling and derivative measurements. The proposed estimator is evaluated against the standard AC-standstill test and a current-slope online method, the mean error remains below 5% in every case. Validation spans the full operating range, including extreme load and speed transients.
- 28 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 14 (1) , 700-712
A Position-Feedback-Free and Inverter-Nonlinearity-Immune Inductance Estimation Method for PMSM Drives Without Signal Injection
Accurate online maps of the incremental inductances Ld, Lq are critical to model-based drives, sensorless observers, and real-time fault diagnosis. Existing techniques either rely on slow, equipment-intensive offline tests or inject auxiliary signals that disturb the drive, depend on precise rotor position, and are difficult to calibrate against inverter nonlinearities. This paper sidesteps those limitations by recasting the fundamental voltage vector sequence as a differential virtual-voltage-vector that inherently rejects dead-time distortion and device voltage drops. A piece-wise multisample linear regression—applied only to the quasi-linear segment of each current trace—then yields a dead-time-immune, noise-resilient estimate of current slopes. The proposed approach introduces three mutually reinforcing advances: (i) a virtual-voltage-vector-oriented framework that inherently accounts for inverter non-linearities; (ii) a multi-sampling-based current-slope estimation strategy that is immune to dead-time effects and suppresses noise; and (iii) a signal-injection-free, rotor-position-independent inductance observer that is explicitly built on the first two advances, harnessing their accurate voltage modeling and derivative measurements. The proposed estimator is evaluated against the standard AC-standstill test and a current-slope online method, the mean error remains below 5% in every case. Validation spans the full operating range, including extreme load and speed transients.
- 3 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (10) , 14626-14637
Online Estimation of Direct- and Quadrature-Axis Inductances Without Rotational Transformation for Finite Control Set PMSM Drives
Model-based finite control set (FCS) strategies require accurate inductance parameters but encounter challenges in updating these parameters online. To address this issue, a switching time-scale online inductance estimation method is proposed. This method leverages current derivatives and eliminates the need for fundamental inverter voltage, additional signal injection, or rotor position information, making it well-suited for FCS strategies. One key element of the proposed method is the introduction of position scalars, which contain both dc and second-harmonic inductance components. A generalized position scalars (GPSs) calculation method has been developed to ensure compatibility with arbitrary voltage vector sequences. The use of GPSs allows for the separation of the amplitude and phase of the second-harmonic inductance. Building on this separation, the $d$-axis and $q$-axis inductances can be estimated without requiring rotor angle information and rotational transformations. An efficient GPSs table lookup process is designed, reducing the computational burden and facilitating online implementation. Moreover, the proposed method can operate with a zero $d$-axis current and under nonsteady-state conditions without causing rank deficiency issues. Experimental results validate the accuracy and efficacy of the method across the entire operating range.
- 3 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (10) , 14626-14637
Online Estimation of Direct- and Quadrature-Axis Inductances Without Rotational Transformation for Finite Control Set PMSM Drives
Model-based finite control set (FCS) strategies require accurate inductance parameters but encounter challenges in updating these parameters online. To address this issue, a switching time-scale online inductance estimation method is proposed. This method leverages current derivatives and eliminates the need for fundamental inverter voltage, additional signal injection, or rotor position information, making it well-suited for FCS strategies. One key element of the proposed method is the introduction of position scalars, which contain both dc and second-harmonic inductance components. A generalized position scalars (GPSs) calculation method has been developed to ensure compatibility with arbitrary voltage vector sequences. The use of GPSs allows for the separation of the amplitude and phase of the second-harmonic inductance. Building on this separation, the $d$-axis and $q$-axis inductances can be estimated without requiring rotor angle information and rotational transformations. An efficient GPSs table lookup process is designed, reducing the computational burden and facilitating online implementation. Moreover, the proposed method can operate with a zero $d$-axis current and under nonsteady-state conditions without causing rank deficiency issues. Experimental results validate the accuracy and efficacy of the method across the entire operating range.
- 9 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 57 (10) , 1-12
Analytical Calculations of Magnetic Fields Induced by MMF Spatial Harmonics in Multiphase Cage Rotor Induction Motors
This article presents an improved analytical spatial harmonics subdomain (SHSD) model for analyzing the influence of individual spatial harmonics, in stator magneto-motive forces (MMFs), on the performance of multiphase cage rotor induction motors (CRIMs). The proposed SHSD model is an extension of conventional techniques that consider each MMF spatial harmonic, caused by stator slots with tooth-tips, to be individual excitations when quantitatively analyzing the resulting physical effects. The solution domain was divided into four subdomains (SDs) in 2-D polar coordinates, including 1) rotor bars described by the Helmholtz equation; 2) air gaps; 3) slot openings described by Laplace’s equation; 4) stator slots represented by pure forced vibration equations. Current density in the stator structure was decomposed in a Fourier series of position angles to obtain MMF spatial harmonics. This produced a set of pure forced vibration equations in the stator slots, which were first solved in 2-D polar coordinates rather than the typical Poisson’s equation. This approach establishes a relationship between electromagnetic performance and stator parameters, for further optimization of IMs and analysis of electromagnetic vibrations. The proposed analytical model was validated using a series of finite element simulations, which exhibited high accuracy and computational efficiency.
- 9 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 57 (10) , 1-12
Analytical Calculations of Magnetic Fields Induced by MMF Spatial Harmonics in Multiphase Cage Rotor Induction Motors
This article presents an improved analytical spatial harmonics subdomain (SHSD) model for analyzing the influence of individual spatial harmonics, in stator magneto-motive forces (MMFs), on the performance of multiphase cage rotor induction motors (CRIMs). The proposed SHSD model is an extension of conventional techniques that consider each MMF spatial harmonic, caused by stator slots with tooth-tips, to be individual excitations when quantitatively analyzing the resulting physical effects. The solution domain was divided into four subdomains (SDs) in 2-D polar coordinates, including 1) rotor bars described by the Helmholtz equation; 2) air gaps; 3) slot openings described by Laplace’s equation; 4) stator slots represented by pure forced vibration equations. Current density in the stator structure was decomposed in a Fourier series of position angles to obtain MMF spatial harmonics. This produced a set of pure forced vibration equations in the stator slots, which were first solved in 2-D polar coordinates rather than the typical Poisson’s equation. This approach establishes a relationship between electromagnetic performance and stator parameters, for further optimization of IMs and analysis of electromagnetic vibrations. The proposed analytical model was validated using a series of finite element simulations, which exhibited high accuracy and computational efficiency.