Qingsong Li
Research Subjects
Qingsong Li has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Qican Ran
State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, China
2 shared publications - Yulin Hu2 shared publications
Bichuan Zhang
1 shared publication- Dan Feng
School of Applied Economics, Guizhou University of Finance and Economics, Guiyang 550025, China
1 shared publication - Dengke Qin1 shared publication
Fanjie Kong
1 shared publication
Latest Publications
- Open Access
Research on the Effectiveness of Gas Control in Low-Permeability Coal Seams Based on Microbial Gas Dissolution
To shorten the gas control period in low-permeability coal seams, the effectiveness of microbial gas dissolution technology for gas control was investigated through a combination of field tests and numerical simulations. First, three groups of injection boreholes were constructed, and the microbial gas-dissolving solution was injected into the coal seam, followed by an evaluation of the treatment effect after three days. Furthermore, based on a multiphysics-coupled modeling framework, the conventional borehole drainage process was simulated using the Partial Differential Equation (PDE) module of COMSOL Multiphysics to compare the evolution of coal seam gas pressure under conventional drainage with the field performance of the gas dissolution treatment. The results showed that the injected bioactive solution promoted methane oxidation and rapidly reduced the gas content and pressure in the treated region. After 3 days of gas dissolution treatment, the average gas content and gas pressure within the overlapping influence zones between the injection borehole groups decreased by 38.0% and 80.7%, respectively, relative to their initial values. However, the treatment effect gradually weakened with increasing distance from the injection zone, indicating spatial attenuation of the effective influence of the bioactive solution in the low-permeability coal seam. Comparatively, conventional drainage required approximately 68 days to reduce the gas pressure to the same level achieved by the gas dissolution treatment within 3 days, demonstrating that gas dissolution technology can drastically accelerate the gas control cycle. Nevertheless, further large-scale application requires consideration of economic feasibility and continued optimization of injection parameters and field implementation procedures.
Open AccessResearch on the Effectiveness of Gas Control in Low-Permeability Coal Seams Based on Microbial Gas Dissolution
To shorten the gas control period in low-permeability coal seams, the effectiveness of microbial gas dissolution technology for gas control was investigated through a combination of field tests and numerical simulations. First, three groups of injection boreholes were constructed, and the microbial gas-dissolving solution was injected into the coal seam, followed by an evaluation of the treatment effect after three days. Furthermore, based on a multiphysics-coupled modeling framework, the conventional borehole drainage process was simulated using the Partial Differential Equation (PDE) module of COMSOL Multiphysics to compare the evolution of coal seam gas pressure under conventional drainage with the field performance of the gas dissolution treatment. The results showed that the injected bioactive solution promoted methane oxidation and rapidly reduced the gas content and pressure in the treated region. After 3 days of gas dissolution treatment, the average gas content and gas pressure within the overlapping influence zones between the injection borehole groups decreased by 38.0% and 80.7%, respectively, relative to their initial values. However, the treatment effect gradually weakened with increasing distance from the injection zone, indicating spatial attenuation of the effective influence of the bioactive solution in the low-permeability coal seam. Comparatively, conventional drainage required approximately 68 days to reduce the gas pressure to the same level achieved by the gas dissolution treatment within 3 days, demonstrating that gas dissolution technology can drastically accelerate the gas control cycle. Nevertheless, further large-scale application requires consideration of economic feasibility and continued optimization of injection parameters and field implementation procedures.
- Open Access
Single-Atom Ru on N-Heterocyclic Carbene-Functionalized Hypercrosslinked Polymers for N-Formylation of Amines with CO2 and H2
Catalytic transformation of carbon dioxide (CO2) into high-value-added chemicals represents a promising approach for CO2 emission reduction and utilization. Herein, single-atom ruthenium (Ru) supported on N-heterocyclic carbene (NHC)-functionalized hypercrosslinked polymers were fabricated and applied as recyclable catalysts for the N-formylation of amines using CO2 and H2 as feedstocks. Catalytic evaluations demonstrated that the chemical structure of the NHC ligand had a significant influence on catalytic activity. Specifically, P(PhPy-TPB)-Ru, functionalized with a single pyridine moiety on the NHC ligand, exhibited the optimal catalytic performance, even slightly outperforming its homogeneous counterpart. Furthermore, mechanistic studies indicated that both the base and solvent played pivotal roles in modulating the reaction activity. In particular, the use of methanol as the solvent in the presence of a base significantly enhanced reaction efficiency, which was attributed to the in situ generation of methyl formate as a key intermediate. Notably, the developed catalytic system possessed excellent catalytic efficiency, a broad substrate scope, superior stability, and easy recyclability, allowing the catalyst to be reused for up to eight consecutive cycles without significant loss of catalytic activity.
Open AccessSingle-Atom Ru on N-Heterocyclic Carbene-Functionalized Hypercrosslinked Polymers for N-Formylation of Amines with CO2 and H2
Catalytic transformation of carbon dioxide (CO2) into high-value-added chemicals represents a promising approach for CO2 emission reduction and utilization. Herein, single-atom ruthenium (Ru) supported on N-heterocyclic carbene (NHC)-functionalized hypercrosslinked polymers were fabricated and applied as recyclable catalysts for the N-formylation of amines using CO2 and H2 as feedstocks. Catalytic evaluations demonstrated that the chemical structure of the NHC ligand had a significant influence on catalytic activity. Specifically, P(PhPy-TPB)-Ru, functionalized with a single pyridine moiety on the NHC ligand, exhibited the optimal catalytic performance, even slightly outperforming its homogeneous counterpart. Furthermore, mechanistic studies indicated that both the base and solvent played pivotal roles in modulating the reaction activity. In particular, the use of methanol as the solvent in the presence of a base significantly enhanced reaction efficiency, which was attributed to the in situ generation of methyl formate as a key intermediate. Notably, the developed catalytic system possessed excellent catalytic efficiency, a broad substrate scope, superior stability, and easy recyclability, allowing the catalyst to be reused for up to eight consecutive cycles without significant loss of catalytic activity.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Gas drainage optimization via fracture network characterization in coal mining
The collapse of overlying strata in the goaf creates fractures that facilitate gas migration and accumulation in the upper corner, increasing the risk of gas overlimit. This study used physical simulations to analyze the distribution of the “three vertical zones” in the 11308 working face. The caved zone height is 28.5 m, and the fractured zone height is 54.4 m. The “voussoir beam” structure of mining-induced fractures was identified as the primary gas migration channel. An innovative fracture classification method was proposed to clarify their development and distribution, revealing that the low-level “rectangular terrace” acts as a gas accumulation “sweet spot,” guiding borehole extraction. Numerical simulations indicated that gas mainly accumulates in the high-level of the fracture zone (7–10 times the mining height). Based on these findings, a “low-level interception-high-level extraction” directional long borehole layout was designed, along with a dynamic balance model of “airflow-borehole extraction-gas migration.” Field application in the 11308 working face showed a 123% increase in gas extraction and a stable gas concentration of 0.08% in the upper corner, significantly reducing the risk of upper corner gas exceeding the limit. These results provide valuable guidance for managing gas risks in similar geological conditions in coal mines.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Gas drainage optimization via fracture network characterization in coal mining
The collapse of overlying strata in the goaf creates fractures that facilitate gas migration and accumulation in the upper corner, increasing the risk of gas overlimit. This study used physical simulations to analyze the distribution of the “three vertical zones” in the 11308 working face. The caved zone height is 28.5 m, and the fractured zone height is 54.4 m. The “voussoir beam” structure of mining-induced fractures was identified as the primary gas migration channel. An innovative fracture classification method was proposed to clarify their development and distribution, revealing that the low-level “rectangular terrace” acts as a gas accumulation “sweet spot,” guiding borehole extraction. Numerical simulations indicated that gas mainly accumulates in the high-level of the fracture zone (7–10 times the mining height). Based on these findings, a “low-level interception-high-level extraction” directional long borehole layout was designed, along with a dynamic balance model of “airflow-borehole extraction-gas migration.” Field application in the 11308 working face showed a 123% increase in gas extraction and a stable gas concentration of 0.08% in the upper corner, significantly reducing the risk of upper corner gas exceeding the limit. These results provide valuable guidance for managing gas risks in similar geological conditions in coal mines.
- 1 May 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (5)
Mechanical properties and failure mechanism of mudstone subjected to cyclic loads with variable loading limit
Elucidating the damage evolution characteristics of roof mudstone under cyclic loading with different loading amplitudes is of great significance for the prevention and control of roof disasters and the safe mining of coal resources. Therefore, multi-stage cyclic loading experiments of mudstone with variable amplitude were carried out. First, the deformation characteristics of mudstone were analyzed. Second, the relationship between acoustic emission parameters and multi-stage cyclic loading was elucidated. Finally, the damage mechanism of mudstone under multi-stage cyclic loading is discussed by analyzing the variation trend of cumulative dissipated energy and cumulative acoustic emission count, supplemented by three-dimensional scanning results. The results show that with the increase in cyclic loading and unloading times, the elastic modulus and cumulative irreversible strain of mudstone increase, and the increase in both of them is relatively large when the amplitude is low. The acoustic emission signal fluctuates greatly in the compression and damage stages and shows a steady increase during the elastic stage. In addition, by analyzing the variation in the combination of activity frequency and rise time to amplitude, it is observed that the mudstone specimen damage follows a shear-dominated tensile–shear combination failure mode, and the higher the amplitude, the greater the proportion of tensile damage. In addition, computed tomography scanning reveals from the microscopic point of view that with the increase in stress amplitude, the degree of mudstone fragmentation is weakened, the fragmentation speed is accelerated, obviously.
- 1 May 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (5)
Mechanical properties and failure mechanism of mudstone subjected to cyclic loads with variable loading limit
Elucidating the damage evolution characteristics of roof mudstone under cyclic loading with different loading amplitudes is of great significance for the prevention and control of roof disasters and the safe mining of coal resources. Therefore, multi-stage cyclic loading experiments of mudstone with variable amplitude were carried out. First, the deformation characteristics of mudstone were analyzed. Second, the relationship between acoustic emission parameters and multi-stage cyclic loading was elucidated. Finally, the damage mechanism of mudstone under multi-stage cyclic loading is discussed by analyzing the variation trend of cumulative dissipated energy and cumulative acoustic emission count, supplemented by three-dimensional scanning results. The results show that with the increase in cyclic loading and unloading times, the elastic modulus and cumulative irreversible strain of mudstone increase, and the increase in both of them is relatively large when the amplitude is low. The acoustic emission signal fluctuates greatly in the compression and damage stages and shows a steady increase during the elastic stage. In addition, by analyzing the variation in the combination of activity frequency and rise time to amplitude, it is observed that the mudstone specimen damage follows a shear-dominated tensile–shear combination failure mode, and the higher the amplitude, the greater the proportion of tensile damage. In addition, computed tomography scanning reveals from the microscopic point of view that with the increase in stress amplitude, the degree of mudstone fragmentation is weakened, the fragmentation speed is accelerated, obviously.