Yulin Hu
Research Subjects
Research Interests
Yulin Hu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Fanjie Kong
2 shared publications- Qican Ran
State Key Laboratory of Coal Mine Disaster Dynamics and Control, Chongqing University, Chongqing, China
2 shared publications - Qingsong Li
Guizhou Energy Group Corporation Limited, Guiyang 550081, China
2 shared publications Bichuan Zhang
1 shared publication- Dengke Qin1 shared publication
- Hao Liu
College of Aerospace Engineering, Chongqing University, Chongqing, China
1 shared publication
Latest Publications
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
Periodic softening–hardening damage mechanism of sandstone under cyclic water immersion
The stability of the surrounding rock in underground tunnels is vital for the safe extraction of coal. Groundwater seepage, in conjunction with rock–water interactions, triggers progressive degradation, which is a primary cause of surrounding rock instability. This degradation leads to damage, posing a serious threat to the safe operation of the coal mine. In this study, cyclic loading and unloading experiments and computed tomography (CT) scanning were conducted on sandstone specimens subjected to varying cyclic water immersion heights. The results demonstrate that increasing the cyclic immersion height and immersion height differential significantly reduces the ultimate bearing capacity of sandstone. This reduction corresponds to a diminished capacity for elastic energy storage and an accelerated rate of energy dissipation associated with crack propagation, as evidenced by an increasing proportion of dissipated energy. Combined with CT scanning analysis, both the three-dimensional fracture volume ratio and the fractal dimension rise with cyclic immersion height, indicating more complex fracture development. Additionally, the study reveals the periodic softening–hardening damage mechanism of sandstone under cyclic water immersion. During the cyclic water immersion process, the periodic loss and replenishment of moisture within the sandstone induce softening–hardening effects on its structure. This alternating process promotes progressive fracture initiation and propagation, accelerates internal damage accumulation, and leads to the degradation of mechanical integrity, ultimately rendering the sandstone more vulnerable to failure. These findings provide valuable insights for the study of surrounding rock stability in coal mine tunnels.
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
Periodic softening–hardening damage mechanism of sandstone under cyclic water immersion
The stability of the surrounding rock in underground tunnels is vital for the safe extraction of coal. Groundwater seepage, in conjunction with rock–water interactions, triggers progressive degradation, which is a primary cause of surrounding rock instability. This degradation leads to damage, posing a serious threat to the safe operation of the coal mine. In this study, cyclic loading and unloading experiments and computed tomography (CT) scanning were conducted on sandstone specimens subjected to varying cyclic water immersion heights. The results demonstrate that increasing the cyclic immersion height and immersion height differential significantly reduces the ultimate bearing capacity of sandstone. This reduction corresponds to a diminished capacity for elastic energy storage and an accelerated rate of energy dissipation associated with crack propagation, as evidenced by an increasing proportion of dissipated energy. Combined with CT scanning analysis, both the three-dimensional fracture volume ratio and the fractal dimension rise with cyclic immersion height, indicating more complex fracture development. Additionally, the study reveals the periodic softening–hardening damage mechanism of sandstone under cyclic water immersion. During the cyclic water immersion process, the periodic loss and replenishment of moisture within the sandstone induce softening–hardening effects on its structure. This alternating process promotes progressive fracture initiation and propagation, accelerates internal damage accumulation, and leads to the degradation of mechanical integrity, ultimately rendering the sandstone more vulnerable to failure. These findings provide valuable insights for the study of surrounding rock stability in coal mine tunnels.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Gas drainage optimization via fracture network characterization in coal mining
The collapse of overlying strata in the goaf creates fractures that facilitate gas migration and accumulation in the upper corner, increasing the risk of gas overlimit. This study used physical simulations to analyze the distribution of the “three vertical zones” in the 11308 working face. The caved zone height is 28.5 m, and the fractured zone height is 54.4 m. The “voussoir beam” structure of mining-induced fractures was identified as the primary gas migration channel. An innovative fracture classification method was proposed to clarify their development and distribution, revealing that the low-level “rectangular terrace” acts as a gas accumulation “sweet spot,” guiding borehole extraction. Numerical simulations indicated that gas mainly accumulates in the high-level of the fracture zone (7–10 times the mining height). Based on these findings, a “low-level interception-high-level extraction” directional long borehole layout was designed, along with a dynamic balance model of “airflow-borehole extraction-gas migration.” Field application in the 11308 working face showed a 123% increase in gas extraction and a stable gas concentration of 0.08% in the upper corner, significantly reducing the risk of upper corner gas exceeding the limit. These results provide valuable guidance for managing gas risks in similar geological conditions in coal mines.
- 1 July 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (7)
Gas drainage optimization via fracture network characterization in coal mining
The collapse of overlying strata in the goaf creates fractures that facilitate gas migration and accumulation in the upper corner, increasing the risk of gas overlimit. This study used physical simulations to analyze the distribution of the “three vertical zones” in the 11308 working face. The caved zone height is 28.5 m, and the fractured zone height is 54.4 m. The “voussoir beam” structure of mining-induced fractures was identified as the primary gas migration channel. An innovative fracture classification method was proposed to clarify their development and distribution, revealing that the low-level “rectangular terrace” acts as a gas accumulation “sweet spot,” guiding borehole extraction. Numerical simulations indicated that gas mainly accumulates in the high-level of the fracture zone (7–10 times the mining height). Based on these findings, a “low-level interception-high-level extraction” directional long borehole layout was designed, along with a dynamic balance model of “airflow-borehole extraction-gas migration.” Field application in the 11308 working face showed a 123% increase in gas extraction and a stable gas concentration of 0.08% in the upper corner, significantly reducing the risk of upper corner gas exceeding the limit. These results provide valuable guidance for managing gas risks in similar geological conditions in coal mines.
- 1 May 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (5)
Mechanical properties and failure mechanism of mudstone subjected to cyclic loads with variable loading limit
Elucidating the damage evolution characteristics of roof mudstone under cyclic loading with different loading amplitudes is of great significance for the prevention and control of roof disasters and the safe mining of coal resources. Therefore, multi-stage cyclic loading experiments of mudstone with variable amplitude were carried out. First, the deformation characteristics of mudstone were analyzed. Second, the relationship between acoustic emission parameters and multi-stage cyclic loading was elucidated. Finally, the damage mechanism of mudstone under multi-stage cyclic loading is discussed by analyzing the variation trend of cumulative dissipated energy and cumulative acoustic emission count, supplemented by three-dimensional scanning results. The results show that with the increase in cyclic loading and unloading times, the elastic modulus and cumulative irreversible strain of mudstone increase, and the increase in both of them is relatively large when the amplitude is low. The acoustic emission signal fluctuates greatly in the compression and damage stages and shows a steady increase during the elastic stage. In addition, by analyzing the variation in the combination of activity frequency and rise time to amplitude, it is observed that the mudstone specimen damage follows a shear-dominated tensile–shear combination failure mode, and the higher the amplitude, the greater the proportion of tensile damage. In addition, computed tomography scanning reveals from the microscopic point of view that with the increase in stress amplitude, the degree of mudstone fragmentation is weakened, the fragmentation speed is accelerated, obviously.
- 1 May 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (5)
Mechanical properties and failure mechanism of mudstone subjected to cyclic loads with variable loading limit
Elucidating the damage evolution characteristics of roof mudstone under cyclic loading with different loading amplitudes is of great significance for the prevention and control of roof disasters and the safe mining of coal resources. Therefore, multi-stage cyclic loading experiments of mudstone with variable amplitude were carried out. First, the deformation characteristics of mudstone were analyzed. Second, the relationship between acoustic emission parameters and multi-stage cyclic loading was elucidated. Finally, the damage mechanism of mudstone under multi-stage cyclic loading is discussed by analyzing the variation trend of cumulative dissipated energy and cumulative acoustic emission count, supplemented by three-dimensional scanning results. The results show that with the increase in cyclic loading and unloading times, the elastic modulus and cumulative irreversible strain of mudstone increase, and the increase in both of them is relatively large when the amplitude is low. The acoustic emission signal fluctuates greatly in the compression and damage stages and shows a steady increase during the elastic stage. In addition, by analyzing the variation in the combination of activity frequency and rise time to amplitude, it is observed that the mudstone specimen damage follows a shear-dominated tensile–shear combination failure mode, and the higher the amplitude, the greater the proportion of tensile damage. In addition, computed tomography scanning reveals from the microscopic point of view that with the increase in stress amplitude, the degree of mudstone fragmentation is weakened, the fragmentation speed is accelerated, obviously.