Xiaotong Lu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaotong Lu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Li Chen
University of Saskatchewan
4 shared publications - Christopher Jarrett Elash
University of Saskatchewan
2 shared publications - Jaime Cardenas Chavez
Department of Electrical and Computer Engineering, University of Saskatchewan, Saskatoon, SK, Canada
2 shared publications - Jiesi Xing
Department of Electrical and Computer Engineering, University of Saskatchewan, Saskatoon, SK, Canada
2 shared publications - Kamal El-Sankary
Dalhousie University
2 shared publications - Ming Yan
Department of Electrical and Computer Engineering, Dalhousie University, Halifax, NS, Canada
2 shared publications
Latest Publications
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
Microbeam Testing of an ASIC Radiation-Hardened 32-bit RISC-V Microcontroller
This work presents microbeam testing of a radiation-hardened 32-bit RISC-V microcontroller device fabricated at the 22-nm FD SOI node. Selective blocks of the device were irradiated with heavy ions, including memory blocks, the device core and peripheral circuitry, as well as the Phase Lock Loop CLK generator. Irradiation results demonstrated that memory errors were not evenly distributed within the device, with Single Event Functional Interrupts (SEFIs) more likely to occur in certain memory blocks. It was demonstrated that the device core and logic circuitry were robust, with all device SEFIs attributed to accumulated memory errors. Particle flux rates were also shown to have nonlinear effects on device SEFI rates. At higher flux rates, the likelihood of memory double-bit upsets increased, which in turn increases the likelihood of a device SEFI. A proposed mathematical framework to better represent the cross-section of more complex digital devices is discussed, which is the summation of cross-sections for individual major blocks within the device.
- 19 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
Microbeam Testing of an ASIC Radiation-Hardened 32-bit RISC-V Microcontroller
This work presents microbeam testing of a radiation-hardened 32-bit RISC-V microcontroller device fabricated at the 22-nm FD SOI node. Selective blocks of the device were irradiated with heavy ions, including memory blocks, the device core and peripheral circuitry, as well as the Phase Lock Loop CLK generator. Irradiation results demonstrated that memory errors were not evenly distributed within the device, with Single Event Functional Interrupts (SEFIs) more likely to occur in certain memory blocks. It was demonstrated that the device core and logic circuitry were robust, with all device SEFIs attributed to accumulated memory errors. Particle flux rates were also shown to have nonlinear effects on device SEFI rates. At higher flux rates, the likelihood of memory double-bit upsets increased, which in turn increases the likelihood of a device SEFI. A proposed mathematical framework to better represent the cross-section of more complex digital devices is discussed, which is the summation of cross-sections for individual major blocks within the device.
- 15 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 73 (1) , 90-99
Radiation Tolerant Multi-Loop VCO Structures in 28-nm FDSOI Technology
This manuscript investigates the use of different multi-loop voltage-controlled oscillator (VCO) structures to mitigate single event effects (SEE). The first approach is a three-stage fully differential cross-coupled ring oscillator, designed with current regulation biasing to enhance supply noise rejection. The second is a fully differential current-mode logic (CML) multi-path ring oscillator with coarse/fine control. Both structures were fabricated in 28-nm FDSOI technology. The cross-coupled ring VCO exhibits enhanced performance when using the high-current configuration, showing a phase noise of -80.1 dBc/Hz at 1 MHz offset from the center frequency of 1.49 GHz and a figure of merit (FoM) of 140. Moreover, the CML multi-path VCO stands out as a high-performance structure with -93.4 dBc/Hz phase noise measured at 1 MHz offset from the 1.42 GHz carrier frequency and a FoM of 151. Single event effects (SEE) and total ionizing dose (TID) responses were evaluated using a 105 MeV proton beam and 60Co radiation, respectively. Experimental results demonstrated significant single event transient (SET) mitigation with both solutions, with the CML multi-path VCO exhibiting superior radiation tolerance with a maximum single event frequency transient (SEFT) of 4.2% and a maximum recovery time of 1.3 ns. Both designs showed high TID tolerance up to 300 krads.
- 15 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 73 (1) , 90-99
Radiation Tolerant Multi-Loop VCO Structures in 28-nm FDSOI Technology
This manuscript investigates the use of different multi-loop voltage-controlled oscillator (VCO) structures to mitigate single event effects (SEE). The first approach is a three-stage fully differential cross-coupled ring oscillator, designed with current regulation biasing to enhance supply noise rejection. The second is a fully differential current-mode logic (CML) multi-path ring oscillator with coarse/fine control. Both structures were fabricated in 28-nm FDSOI technology. The cross-coupled ring VCO exhibits enhanced performance when using the high-current configuration, showing a phase noise of -80.1 dBc/Hz at 1 MHz offset from the center frequency of 1.49 GHz and a figure of merit (FoM) of 140. Moreover, the CML multi-path VCO stands out as a high-performance structure with -93.4 dBc/Hz phase noise measured at 1 MHz offset from the 1.42 GHz carrier frequency and a FoM of 151. Single event effects (SEE) and total ionizing dose (TID) responses were evaluated using a 105 MeV proton beam and 60Co radiation, respectively. Experimental results demonstrated significant single event transient (SET) mitigation with both solutions, with the CML multi-path VCO exhibiting superior radiation tolerance with a maximum single event frequency transient (SEFT) of 4.2% and a maximum recovery time of 1.3 ns. Both designs showed high TID tolerance up to 300 krads.
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (8) , 2132-2142
A 10-bit 50-MS/s Radiation Tolerant Split Coarse/Fine SAR ADC in 65-nm CMOS
This article presents a 10-bit radiation-hardened-by-design (RHBD) SAR analog-to-digital converter (ADC) operating at 50 MS/s, designed for aerospace applications in high-radiation environments. The system- and circuit-level redundancy techniques are implemented to mitigate radiation-induced errors and metastability. A novel split coarse/fine asynchronous SAR ADC architecture is proposed to provide system-level redundancy. At circuits level, single-event effects (SEEs) error detection and radiation-hardened techniques are implemented. Our co-designed SEE error detection scheme includes last-bit-cycle (LBC) detection following the LSB cycle and metastability detection (MD) via a ramp generator with a threshold trigger. This approach detects and corrects radiation-induced errors using a coarse/fine redundant algorithm. The radiation-hardened latch comparators and D flip-flops (DFFs) are incorporated to further mitigate SEEs. The prototype design is fabricated using TSMC 65-nm technology, with an ADC core area of 0.0875 mm2 and a power consumption of 2.79 mW at a 1.2-V power supply. Postirradiation tests confirm functionality up to 100-krad(Si) total ionizing dose (TID) and demonstrate over 90% suppression of large SEE under laser testing.
- 17 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 33 (8) , 2132-2142
A 10-bit 50-MS/s Radiation Tolerant Split Coarse/Fine SAR ADC in 65-nm CMOS
This article presents a 10-bit radiation-hardened-by-design (RHBD) SAR analog-to-digital converter (ADC) operating at 50 MS/s, designed for aerospace applications in high-radiation environments. The system- and circuit-level redundancy techniques are implemented to mitigate radiation-induced errors and metastability. A novel split coarse/fine asynchronous SAR ADC architecture is proposed to provide system-level redundancy. At circuits level, single-event effects (SEEs) error detection and radiation-hardened techniques are implemented. Our co-designed SEE error detection scheme includes last-bit-cycle (LBC) detection following the LSB cycle and metastability detection (MD) via a ramp generator with a threshold trigger. This approach detects and corrects radiation-induced errors using a coarse/fine redundant algorithm. The radiation-hardened latch comparators and D flip-flops (DFFs) are incorporated to further mitigate SEEs. The prototype design is fabricated using TSMC 65-nm technology, with an ADC core area of 0.0875 mm2 and a power consumption of 2.79 mW at a 1.2-V power supply. Postirradiation tests confirm functionality up to 100-krad(Si) total ionizing dose (TID) and demonstrate over 90% suppression of large SEE under laser testing.