WCWilliam Cai

William Cai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


William Cai has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • AC Loss Calculation Method for Wave Wound Hairpin End Winding of PMSM

    by Chen Yang, Ying Xie, William Cai, Yue Tang, Lei Yang, Baicheng Shao

    With the development of electric vehicles, permanent magnet synchronous motor with hairpin winding is gradually becoming popular. Because of the large cross-sectional area of hairpin winding, the skin effect and proximity effect lead to large eddy current loss, especially at high frequencies. The AC loss of end winding cannot be ignored. Conductors with different phases overlap each other at wave-wound hairpin end winding. The phase difference between windings affects the eddy current loss. It is necessary to accurately calculate the AC loss of the wave-wound hairpin end winding. The analytical method and three-dimensional finite element method are difficult and time-consuming. This article analyzes the influence factors of the AC loss of end winding. An AC loss calculation method for wave-wound hairpin end winding that considers the phase difference and winding gaps is proposed. The proposed method is based on the two-dimensional finite element method, which saves calculation time. An experimental method is proposed to separate copper loss and iron loss. The AC loss experimental results show that the error between the proposed method and experiment is less than 2% at high frequency.

  • Open Access

    AC Loss Suppression of High-Speed Permanent Magnet Synchronous Motor for Vehicles Based on End Transposed Winding Method

    by Haigui Gong, William Cai, Mingchong Sun, Ying Xie, Yue Tang, Shoulun Guo, Yongxi Yang, Zhanxi Lin, Zhiran Su, Xuesheng Jiang

    Flat wire winding has some advantages, such as a high slot fill factor and low vibration noise, which is a mainstream technology solution for vehicle drive motors. However, when the motors operate at high-speeds, high-frequency AC losses of the flat wire winding are prominent, which directly limit the improvement of motor efficiency and power density. To reduce high-frequency AC losses, this article proposed a scheme based on end transposed winding (ETW). The conductors near the slot openings use ETW, whereas those in the other layers are flat wire windings. Firstly, based on the distribution of AC losses in the flat wire winding (FWW), the ETW scheme is proposed. Then, the stator winding slot shape and conductor size parameters are optimized to determine the structural dimensions. Finally, the AC losses and efficiency of ETW and the original FWW are calculated and compared, as well as the impact on efficiency under the China Light-duty vehicle Test Cycle (CLTC) driving conditions. The effectiveness of the proposed ETW prototype in suppressing AC loss is verified experimentally. The results indicate that, compared with the FWW, the AC loss of the proposed ETW is reduced by 21.2% at the 24000r/min.


  • An Improved Magnetic Circuit Method for the Interior Permanent Magnet Synchronous Motor

    by Fang Zhang, Ying Xie, William Cai, Daolu Li

    An improved magnetic circuit (MC) method is proposed in this article. This method enables quick modeling and computation in the interior permanent magnet synchronous motor (IPMSM). The key improvement is that a new magnetic motive forces setting approach is proposed. This approach can eliminate the need for manual assignment, thereby facilitating the modeling process for any complex structure. Besides, the simplified magnetic reluctance model and network are given. They are suitable for the new setting approach and can reduce the complexity of modeling. Then, the reluctance network matrix equations are rebuilt to match the new approach. The iteration variable of the equations is modified to accelerate convergence and to prevent iteration divergence. Lastly, the effectiveness of the proposed MC method is verified by the simulation and experiment. The proposed MC method enhances the adaptability and applicability of existing MC methods. It can accurately calculate the magnetic field and performance parameters of IPMSM and is beneficial for optimization design.

  • Global Electromagnetic Analysis of Condenser Involving HVDC Systems Based on a Field-Circuit-Grid Coupled Model

    by Likun Wang, Jiaqi Yang, William Cai, Fabrizio Marignetti, Nicola Bianchi, Zimeng Zhang, Zhichao Liu, Aldo Boglietti

    The synchronous condenser (SC) is a dynamic reactive power compensation device. It provides reactive power support under steady-state conditions. At the same time, it can provide transient reactive power support during power system faults. When the power grid experiences faults, the nonlinear characteristics of the power system significantly increase. This leads to electromagnetic oscillations in the synchronous condenser. This article focuses on the global electromagnetic dynamic changes of the synchronous condenser under power grid fault conditions. The nature of the global electromagnetic transient analysis lies in covering the entire structure of the synchronous condenser, which includes both the stator core area of the synchronous condenser and the complex end leakage magnetic area. The proposed field-circuit-power grid coupling (FCPC) model integrates the synchronous condenser, excitation control system, and HVdc system into a unified framework. It addresses the limitation of traditional single field-circuit coupled models, which essentially fail to couple these external controls with the internal electromagnetic behavior of the synchronous condenser. It significantly improves computational efficiency. Finally, by comparing with the experimental results, the accuracy of the model is verified.

  • Design Optimization of Large-Capacity High-Speed Permanent-Magnet Generator Based on Surrogate-Assisted Non-Dominated Sorting Genetic Algorithm

    by Bitian Ye, Ying Xie, William Cai, Yutian Sun, Jing Bai

    The large-capacity high-speed permanent-magnet generator, with its unique design, plays a crucial role in special applications such as aviation and integrated power system. However, it has strict requirements for power quality, and there is a problem of design optimization efficiency. In this article, a 2.5 MW, 7000 r/min large-capacity high-speed permanent-magnet generator is designed. To enhance the power quality and optimization efficiency, an efficient optimization method based on surrogate-assisted non-dominated sorting genetic algorithm II (SANSGA-II) is proposed. Initially, the surrogate model of the generator is constructed by using Latin hypercube sampling, and the relationship between optimization variables and objectives is explored. Subsequently, the surrogate model is utilized to predict and sort the objective values in the variable space. The variable values in the high-value area are taken as the adjustment directions for crossover and mutation, thereby improving the optimization efficiency and diversity of the algorithm. In addition, the dynamic point addition strategy is implemented. Then, the accuracy of the model is ensured and the reliability of the algorithm is enhanced. These improvements provide a theoretical basis for the optimization method of the generator. By using the proposed and traditional methods, the generator performance is optimized. The results show that the proposed method achieves faster iteration speed and higher solution quality than traditional method. Finally, the prototype is manufactured based on the design parameters and tested. The optimization results are validated for both accuracy and reliability.

  • Improvement of Electromagnetic-Thermal Characteristics in a Modular In-Wheel Motor Under Open-Circuit Faults and Asymmetric Working Winding Operations Based on Fault-Tolerant Strategy

    by Yue Tang, William Cai, Ying Xie, Feng Chai, Junshan Gao, Huabo Qu

    Multiunit modular in-wheel motors have a high utilization rate of remaining healthy windings and a high-power density during fault-tolerant (FT) operations. However, when the open-circuit faulty motor operates with FT control, the working windings are asymmetric in the circumferential space, which will cause some problems, such as decreased electromagnetic characteristics and local windings with a higher temperature. This article aims to mitigate the disadvantages caused by asymmetrical working winding operations, and to explore the FT strategies to comprehensively improve the electromagnetic-thermal characteristics under FT operations. First, the main types of open-circuit faults for the modular motor are introduced, and the impact mechanisms of asymmetric winding operations on MMF, torque performance are analyzed, respectively. Thereafter, the FT strategies based on MMF compensation and torque performance improvement are obtained, respectively. Second, the influence of FT strategies on the efficiency, the loss and temperature distributions of the motor under asymmetric winding operation is investigated. And the above FT strategy is upgraded, which not only enhance electromagnetic characteristics but also improve the thermal characteristics of the remaining healthy windings. Finally, the improvement effect of the FT strategies on the electromagnetic-thermal characteristics FT control and asymmetric working winding operations are verified by experiments.


  • A Novel Multistructure Equivalent Magnetic Network Model for PMSM With Enhanced Magnetic Field Analysis and Saturation Compensation

    by Likun Wang, Siyu Zhang, William Cai, Bin Li, Zitong Zhan, Nicola Bianchi, Aldo Boglietti

    This article establishes an ameliorated equivalent magnetic network (AEMN) model for the modeling and analysis of the permanent magnet synchronous motor used in compressors. A novel air-gap network model with multi-structure grids inlay (equilateral triangles and hexagons) is introduced to capture irregular flux paths. At the same time, for the magnetic flux leakage of the notch, an eight-pointed star-shaped center-radiation grid structure with a mixture of orthogonal and oblique was selected for modeling. To address magnetic saturation in the stator tooth crown, a compensation permeance (CP) method dynamically adjusts permeance, correcting nonlinear effects and improving field distribution accuracy. In addition, when considering rotor rotation, the dynamic switching of this model can be achieved merely by altering the permeance and magnet motive force (MMF) within the fixed magnetic circuit of the rotor region. Finally, a PMSM test platform was built to calculate the flux linkage, back EMF, air-gap flux density and torque, and compared with the finite element analysis, lumped parameter magnetic circuit model and experimental data, the accuracy and effectiveness of the AEMN model were verified.