Themelina Paraskeva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Themelina Paraskeva has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Nuha Salim Mashaan
School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia
7 shared publications - Adeel Iqbal
School of Engineering, Edith Cowan University (ECU), Joondalup, Perth, WA 6027, Australia
3 shared publications - Ali Ghodrati
Mineral Recovery Research Centre (MRRC), School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia
2 shared publications - Sajad Razzazan
Mineral Recovery Research Centre (MRRC), School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia
2 shared publications Ayman Mansour
1 shared publication- Mohamed A. Shahin
School of Civil and Mechanical Engineering, Curtin University, Perth, WA 6102, Australia
1 shared publication
Latest Publications
- Open Access
- 31 July 2026
- Published by Elsevier in Structures
- Vol. 91
A novel mesoscopic modelling approach for steel fibre-reinforced concrete: Investigating the effects of fibre alignment on flexural performance
- 31 July 2026
- Published by Elsevier in Structures
- Vol. 91
Open AccessA novel mesoscopic modelling approach for steel fibre-reinforced concrete: Investigating the effects of fibre alignment on flexural performance
- Open Access
- 29 July 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (8) , 397
Evaluating ECHO2 Biochar as Sustainable Bitumen Binder Modifier in Road Pavements: High-Temperature Performance Characterisation
The incorporation of bio-derived modifiers in bitumen binders presents a practical pathway toward sustainable, carbon-sequestering road pavement infrastructure. This study evaluates commercially produced ECHO2 softwood biochar as a modifier for Australian viscosity-graded C170 bitumen, combining microstructural, thermal, physical, and rheological characterization to assess its suitability as a high-temperature reinforcing modifier. In this study, biochar was incorporated at 3%, 6%, 9%, and 12% by weight, utilizing particles smaller than 75 µm to maximize interfacial interaction. Characterization via SEM-EDS, XRD, and TGA revealed a highly stable, carbon-rich, amorphous material with a rough, porous morphology, favourable for physical interlocking with the bitumen matrix. Physical and rheological investigations demonstrated that ECHO2 biochar measurably enhances binder stiffness and high-temperature deformation resistance. Compared with the control, 12% biochar modification reduced penetration by approximately 27% and increased the softening point by approximately 10%, indicating a reduction in temperature susceptibility. Dynamic shear rheometer (DSR) temperature sweeps highlighted substantial increases in the complex shear modulus (G*) and rutting factor (G*/sinδ) without altering the phase angle (δ), confirming the modifier acts as a rigid, particulate reinforcing agent rather than an elastomer. Multiple stress creep recovery (MSCR) testing supported these findings; non-recoverable creep compliance (Jnr) decreased progressively. Critically, under the AASHTO M 332 specification, while the neat bitumen binder barely met the standard traffic (S) criteria, the progressive reduction in Jnr (particularly at 12%) delivered a substantially higher factor of safety against rutting within the standard traffic designation. Finally, ECHO2 biochar demonstrates strong potential as a sustainable modifier that restricts viscous flow through particulate stiffening, enhancing high-temperature rutting resistance at elevated temperatures.
- 29 July 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (8) , 397
Open AccessEvaluating ECHO2 Biochar as Sustainable Bitumen Binder Modifier in Road Pavements: High-Temperature Performance Characterisation
The incorporation of bio-derived modifiers in bitumen binders presents a practical pathway toward sustainable, carbon-sequestering road pavement infrastructure. This study evaluates commercially produced ECHO2 softwood biochar as a modifier for Australian viscosity-graded C170 bitumen, combining microstructural, thermal, physical, and rheological characterization to assess its suitability as a high-temperature reinforcing modifier. In this study, biochar was incorporated at 3%, 6%, 9%, and 12% by weight, utilizing particles smaller than 75 µm to maximize interfacial interaction. Characterization via SEM-EDS, XRD, and TGA revealed a highly stable, carbon-rich, amorphous material with a rough, porous morphology, favourable for physical interlocking with the bitumen matrix. Physical and rheological investigations demonstrated that ECHO2 biochar measurably enhances binder stiffness and high-temperature deformation resistance. Compared with the control, 12% biochar modification reduced penetration by approximately 27% and increased the softening point by approximately 10%, indicating a reduction in temperature susceptibility. Dynamic shear rheometer (DSR) temperature sweeps highlighted substantial increases in the complex shear modulus (G*) and rutting factor (G*/sinδ) without altering the phase angle (δ), confirming the modifier acts as a rigid, particulate reinforcing agent rather than an elastomer. Multiple stress creep recovery (MSCR) testing supported these findings; non-recoverable creep compliance (Jnr) decreased progressively. Critically, under the AASHTO M 332 specification, while the neat bitumen binder barely met the standard traffic (S) criteria, the progressive reduction in Jnr (particularly at 12%) delivered a substantially higher factor of safety against rutting within the standard traffic designation. Finally, ECHO2 biochar demonstrates strong potential as a sustainable modifier that restricts viscous flow through particulate stiffening, enhancing high-temperature rutting resistance at elevated temperatures.
- Open Access
Lithium Slag as a Supplementary Cementitious Material for Sustainable Concrete: A Review
The global cement industry remains a significant contributor to carbon dioxide (CO2) emissions, prompting substantial research efforts toward sustainable construction materials. Lithium slag (LS), a by-product of lithium extraction, has attracted attention as a supplementary cementitious material (SCM). This review synthesizes experimental findings on LS replacement levels, fresh-state behavior, mechanical performance (compressive, tensile, and flexural strengths), time-dependent deformation (shrinkage and creep), and durability (sulfate, acid, abrasion, and thermal) of LS-modified concretes. Statistical analysis identifies an optimal LS dosage of 20–30% (average 24%) for maximizing compressive strength and long-term durability, with 40% as a practical upper limit for tensile and flexural performance. Fresh-state tests show that workability losses at high LS content can be mitigated via superplasticizers. Drying shrinkage and creep strains decrease in a dose-dependent manner with up to 30% LS. High-volume (40%) LS blends achieve up to an 18% gain in 180-day compressive strength and >30% reduction in permeability metrics. Under elevated temperatures, 20% LS mixes retain up to 50% more residual strength than controls. In advanced systems—autoclaved aerated concrete (AAC), one-part geopolymers, and recycled aggregate composites—LS further enhances both microstructural densification and durability. In particular, LS emerges as a versatile SCM that optimizes mechanical and durability performance, supports material circularity, and reduces the carbon footprint.
Open AccessLithium Slag as a Supplementary Cementitious Material for Sustainable Concrete: A Review
The global cement industry remains a significant contributor to carbon dioxide (CO2) emissions, prompting substantial research efforts toward sustainable construction materials. Lithium slag (LS), a by-product of lithium extraction, has attracted attention as a supplementary cementitious material (SCM). This review synthesizes experimental findings on LS replacement levels, fresh-state behavior, mechanical performance (compressive, tensile, and flexural strengths), time-dependent deformation (shrinkage and creep), and durability (sulfate, acid, abrasion, and thermal) of LS-modified concretes. Statistical analysis identifies an optimal LS dosage of 20–30% (average 24%) for maximizing compressive strength and long-term durability, with 40% as a practical upper limit for tensile and flexural performance. Fresh-state tests show that workability losses at high LS content can be mitigated via superplasticizers. Drying shrinkage and creep strains decrease in a dose-dependent manner with up to 30% LS. High-volume (40%) LS blends achieve up to an 18% gain in 180-day compressive strength and >30% reduction in permeability metrics. Under elevated temperatures, 20% LS mixes retain up to 50% more residual strength than controls. In advanced systems—autoclaved aerated concrete (AAC), one-part geopolymers, and recycled aggregate composites—LS further enhances both microstructural densification and durability. In particular, LS emerges as a versatile SCM that optimizes mechanical and durability performance, supports material circularity, and reduces the carbon footprint.
- Open Access
- 1 August 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (8) , 402
Mining Waste in Asphalt Pavements: A Critical Review of Waste Rock and Tailings Applications
This paper presents a critical and comprehensive review of the application of mining waste, specifically waste rock and tailings, in asphalt pavements, with the aim of synthesizing performance outcomes and identifying key research gaps. A systematic literature search yielded a final dataset of 41 peer-reviewed articles for detailed analysis. Bibliometric analysis indicates a notable upward trend in annual publications, reflecting growing academic and practical interest in this field. Performance-based evaluations demonstrate that mining wastes, particularly iron and copper tailings, have the potential to enhance the high-temperature performance (i.e., rutting resistance) of asphalt binders and mixtures when utilized as fillers or aggregates. However, their effects on fatigue life, low-temperature cracking, and moisture susceptibility are inconsistent, largely influenced by the physicochemical properties and dosage of the specific waste material. Despite promising results, critical knowledge gaps remain, particularly in relation to long-term durability, comprehensive environmental and economic Life-Cycle Assessments (LCA), and the inherent variability of waste materials. This review underscores the substantial potential of mining wastes as sustainable alternatives to conventional pavement materials, while emphasizing the need for further multidisciplinary research to support their broader implementation.
- 1 August 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (8) , 402
Open AccessMining Waste in Asphalt Pavements: A Critical Review of Waste Rock and Tailings Applications
This paper presents a critical and comprehensive review of the application of mining waste, specifically waste rock and tailings, in asphalt pavements, with the aim of synthesizing performance outcomes and identifying key research gaps. A systematic literature search yielded a final dataset of 41 peer-reviewed articles for detailed analysis. Bibliometric analysis indicates a notable upward trend in annual publications, reflecting growing academic and practical interest in this field. Performance-based evaluations demonstrate that mining wastes, particularly iron and copper tailings, have the potential to enhance the high-temperature performance (i.e., rutting resistance) of asphalt binders and mixtures when utilized as fillers or aggregates. However, their effects on fatigue life, low-temperature cracking, and moisture susceptibility are inconsistent, largely influenced by the physicochemical properties and dosage of the specific waste material. Despite promising results, critical knowledge gaps remain, particularly in relation to long-term durability, comprehensive environmental and economic Life-Cycle Assessments (LCA), and the inherent variability of waste materials. This review underscores the substantial potential of mining wastes as sustainable alternatives to conventional pavement materials, while emphasizing the need for further multidisciplinary research to support their broader implementation.
- Open Access
- 21 July 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (14) , 8112
Incorporating Waste Plastics into Pavement Materials: A Review of Opportunities, Risks, Environmental Implications, and Monitoring Strategies
The integration of waste plastics into pavement materials offers a dual benefit of enhancing road performance and mitigating the environmental burden of plastic waste. This review critically examines the opportunities and challenges associated with incorporating waste plastics in pavement construction, with an emphasis on their impact on the mechanical properties, durability, and life cycle performance of pavements. Special attention is given to the environmental implications, particularly the potential generation and release of micro- and nano-plastics during the pavement life cycle. This paper further evaluates current monitoring and analytical methodologies for detecting plastic emissions from road surfaces and explores emerging approaches for minimizing environmental risks. By providing a comprehensive synthesis of existing knowledge, this review seeks to support sustainable practices and inform policy development within the frameworks of circular economy and environmental stewardship.
- 21 July 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (14) , 8112
Open AccessIncorporating Waste Plastics into Pavement Materials: A Review of Opportunities, Risks, Environmental Implications, and Monitoring Strategies
The integration of waste plastics into pavement materials offers a dual benefit of enhancing road performance and mitigating the environmental burden of plastic waste. This review critically examines the opportunities and challenges associated with incorporating waste plastics in pavement construction, with an emphasis on their impact on the mechanical properties, durability, and life cycle performance of pavements. Special attention is given to the environmental implications, particularly the potential generation and release of micro- and nano-plastics during the pavement life cycle. This paper further evaluates current monitoring and analytical methodologies for detecting plastic emissions from road surfaces and explores emerging approaches for minimizing environmental risks. By providing a comprehensive synthesis of existing knowledge, this review seeks to support sustainable practices and inform policy development within the frameworks of circular economy and environmental stewardship.
- Open Access
- 8 July 2025
- Published by MDPI AG in Preprints.org
Lithium Slag as a Supplementary Cementitious Material for Sustainable Concrete: A Review
The global cement industry remains a significant contributor to carbon dioxide (CO₂) emissions, prompting substantial research efforts toward sustainable construction materials. Lithium slag (LS), a by-product of lithium extraction, has attracted attention as a supplementary cementitious material (SCM). This review synthesizes experimental findings on LS replacement levels, fresh-state behavior, mechanical performance (compressive, tensile, and flexural strengths), time-dependent deformation (shrinkage and creep), and durability (sulfate, acid, abrasion, thermal) of LS-modified concretes. Statistical analysis identifies an optimal LS dosage of 20–30 % (average 24 %) for maximizing compressive strength and long-term durability, with 40 % as a practical upper limit for tensile and flexural performance. Fresh-state tests show that workability losses at high LS contents can be mitigated via superplasticizers. Drying shrinkage and creep strains decrease in a dose-dependent manner up to 30 % LS. High-volume (40 %) LS blends achieve up to an 18 % gain in 180-day compressive strength and > 30 % reductions in permeability metrics. Under elevated temperatures, 20 % LS mixes retain up to 50 % more residual strength than controls. In advanced systems—autoclaved aerated concrete (AAC), one-part geopolymers, and recycled-aggregate composites—LS further enhances both microstructural densification and durability. In particular, LS emerges as a versatile SCM that optimizes mechanical and durability performance, supports material circularity, and reduces carbon footprint.
- 8 July 2025
- Published by MDPI AG in Preprints.org
Open AccessLithium Slag as a Supplementary Cementitious Material for Sustainable Concrete: A Review
The global cement industry remains a significant contributor to carbon dioxide (CO₂) emissions, prompting substantial research efforts toward sustainable construction materials. Lithium slag (LS), a by-product of lithium extraction, has attracted attention as a supplementary cementitious material (SCM). This review synthesizes experimental findings on LS replacement levels, fresh-state behavior, mechanical performance (compressive, tensile, and flexural strengths), time-dependent deformation (shrinkage and creep), and durability (sulfate, acid, abrasion, thermal) of LS-modified concretes. Statistical analysis identifies an optimal LS dosage of 20–30 % (average 24 %) for maximizing compressive strength and long-term durability, with 40 % as a practical upper limit for tensile and flexural performance. Fresh-state tests show that workability losses at high LS contents can be mitigated via superplasticizers. Drying shrinkage and creep strains decrease in a dose-dependent manner up to 30 % LS. High-volume (40 %) LS blends achieve up to an 18 % gain in 180-day compressive strength and > 30 % reductions in permeability metrics. Under elevated temperatures, 20 % LS mixes retain up to 50 % more residual strength than controls. In advanced systems—autoclaved aerated concrete (AAC), one-part geopolymers, and recycled-aggregate composites—LS further enhances both microstructural densification and durability. In particular, LS emerges as a versatile SCM that optimizes mechanical and durability performance, supports material circularity, and reduces carbon footprint.
- Open Access
- 25 June 2025
- Published by MDPI AG in Preprints.org
Mining Waste in Asphalt Pavements: A Critical Review of Waste Rocks and Tailings Applications
This paper presents a critical and comprehensive review of the application of mining waste specifically waste rock and tailings in asphalt pavements, with the aim of synthesizing performance outcomes and identifying key research gaps. A systematic literature search yielded a final dataset of 41 peer-reviewed articles for detailed analysis. Bibliometric analysis indicates a notable upward trend in annual publications, reflecting growing academic and practical interest in this field. Performance based evaluations demonstrate that mining wastes, particularly iron and copper tailings, have the potential to enhance the high-temperature performance (i.e., rutting resistance) of asphalt binders and mixtures when utilized as fillers or aggregates. However, their effects on fatigue life, low-temperature cracking, and moisture susceptibility are inconsistent, largely influenced by the physicochemical properties and dosage of the specific waste material. Despite promising results, critical knowledge gaps remain particularly in relation to long-term durability, comprehensive environmental and economic life-cycle assessments, and the inherent variability of waste materials. This review underscores the substantial potential of mining wastes as sustainable alternatives to conventional pavement materials, while emphasizing the need for further multidisciplinary research to support their broader implementation.
- 25 June 2025
- Published by MDPI AG in Preprints.org
Open AccessMining Waste in Asphalt Pavements: A Critical Review of Waste Rocks and Tailings Applications
This paper presents a critical and comprehensive review of the application of mining waste specifically waste rock and tailings in asphalt pavements, with the aim of synthesizing performance outcomes and identifying key research gaps. A systematic literature search yielded a final dataset of 41 peer-reviewed articles for detailed analysis. Bibliometric analysis indicates a notable upward trend in annual publications, reflecting growing academic and practical interest in this field. Performance based evaluations demonstrate that mining wastes, particularly iron and copper tailings, have the potential to enhance the high-temperature performance (i.e., rutting resistance) of asphalt binders and mixtures when utilized as fillers or aggregates. However, their effects on fatigue life, low-temperature cracking, and moisture susceptibility are inconsistent, largely influenced by the physicochemical properties and dosage of the specific waste material. Despite promising results, critical knowledge gaps remain particularly in relation to long-term durability, comprehensive environmental and economic life-cycle assessments, and the inherent variability of waste materials. This review underscores the substantial potential of mining wastes as sustainable alternatives to conventional pavement materials, while emphasizing the need for further multidisciplinary research to support their broader implementation.
- Open Access
- 24 June 2025
- Published by MDPI AG in Preprints.org
Incorporating Waste Plastics into Pavement Materials: A Review of Opportunities, Risks, Environmental Implications and Monitoring Strategies
The integration of waste plastics into pavement materials offers a dual benefit of enhancing road performance and mitigating the environmental burden of plastic waste. This review critically examines the opportunities and challenges associated with incorporating waste plastics in pavement construction, with an emphasis on their impact on mechanical properties, durability, and lifecycle performance of pavements. Special attention is given to the environmental implications, particularly the potential generation and release of micro- and nano-plastics during the pavement lifecycle. The paper further evaluates current monitoring and analytical methodologies for detecting plastic emissions from road surfaces and explores emerging approaches for minimizing environmental risks. By providing a comprehensive synthesis of existing knowledge, this review seeks to support sustainable practices and inform policy development within the frameworks of circular economy and environmental stewardship.
- 24 June 2025
- Published by MDPI AG in Preprints.org
Open AccessIncorporating Waste Plastics into Pavement Materials: A Review of Opportunities, Risks, Environmental Implications and Monitoring Strategies
The integration of waste plastics into pavement materials offers a dual benefit of enhancing road performance and mitigating the environmental burden of plastic waste. This review critically examines the opportunities and challenges associated with incorporating waste plastics in pavement construction, with an emphasis on their impact on mechanical properties, durability, and lifecycle performance of pavements. Special attention is given to the environmental implications, particularly the potential generation and release of micro- and nano-plastics during the pavement lifecycle. The paper further evaluates current monitoring and analytical methodologies for detecting plastic emissions from road surfaces and explores emerging approaches for minimizing environmental risks. By providing a comprehensive synthesis of existing knowledge, this review seeks to support sustainable practices and inform policy development within the frameworks of circular economy and environmental stewardship.