Vladyslav Korchuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vladyslav Korchuk has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Oleg Karuskevych
National University “Kyiv Aviation Institute” Kyiv Ukraine
3 shared publications - Mikhail Karuskevich
National University “Kyiv Aviation Institute
2 shared publications - Ivan Lozovskyi1 shared publication
M. Karuskevych
1 shared publication- Olena Korchuk
National Aviation University
1 shared publication - Tetiana Maslak
National University "Kyiv Aviation Institute
1 shared publication
Latest Publications
- Open Access
- 17 March 2026
- Published by Khmelnytskyi National University in Problems of tribology
- Vol. 31 (1/119)
Surface deformation relief as an indicator of fatigue damage under two-step loading sequences
The study investigates the possibility of predicting the residual fatigue life of clad structural aluminum alloys based on the quantitative evaluation of surface deformation relief formed during cyclic loading. Fatigue damage accumulation in metallic structures is accompanied by microstructural transformations caused by dislocation motion along crystallographic planes. These processes lead to the formation of characteristic surface features such as slip bands, extrusions, and intrusions. Although these structures are three-dimensional, their development can be effectively assessed using two-dimensional optical microscopy images, enabling quantitative analysis of the deformation relief evolution during fatigue loading. The research focuses on clad aluminum alloys widely used in aircraft structures, including D16ATV, V95, 2024-T3, and 7075-T6. The obtained data allowed regression models to be developed that relate the damage parameter to the relative residual fatigue life. The proposed approach was extended from regular cyclic loading to simple irregular loading regimes, specifically two-step loading sequences of the “low–high” and “high–low” types. The results were compared with predictions based on Miner’s linear fatigue damage summation rule. Within a certain range of cyclic stresses, the developed regression model provides prediction accuracy comparable to, and in some cases exceeding, that obtained using Miner’s rule. The results confirm that the saturation of surface deformation relief can serve as a structurally sensitive indicator of accumulated fatigue damage. The proposed methodology can be applied both to direct monitoring of clad aluminum structural components and to the fatigue indicators for metal structures of aircraft, bridge, pressure vessels
- 17 March 2026
- Published by Khmelnytskyi National University in Problems of tribology
- Vol. 31 (1/119)
Open AccessSurface deformation relief as an indicator of fatigue damage under two-step loading sequences
The study investigates the possibility of predicting the residual fatigue life of clad structural aluminum alloys based on the quantitative evaluation of surface deformation relief formed during cyclic loading. Fatigue damage accumulation in metallic structures is accompanied by microstructural transformations caused by dislocation motion along crystallographic planes. These processes lead to the formation of characteristic surface features such as slip bands, extrusions, and intrusions. Although these structures are three-dimensional, their development can be effectively assessed using two-dimensional optical microscopy images, enabling quantitative analysis of the deformation relief evolution during fatigue loading. The research focuses on clad aluminum alloys widely used in aircraft structures, including D16ATV, V95, 2024-T3, and 7075-T6. The obtained data allowed regression models to be developed that relate the damage parameter to the relative residual fatigue life. The proposed approach was extended from regular cyclic loading to simple irregular loading regimes, specifically two-step loading sequences of the “low–high” and “high–low” types. The results were compared with predictions based on Miner’s linear fatigue damage summation rule. Within a certain range of cyclic stresses, the developed regression model provides prediction accuracy comparable to, and in some cases exceeding, that obtained using Miner’s rule. The results confirm that the saturation of surface deformation relief can serve as a structurally sensitive indicator of accumulated fatigue damage. The proposed methodology can be applied both to direct monitoring of clad aluminum structural components and to the fatigue indicators for metal structures of aircraft, bridge, pressure vessels
- 22 January 2026
- Published by State University "Kyiv Aviation Institute" in Problems of Friction and Wear
- No. 4(109),p. 61-69
ROTATING BENDING FATIGUE TEST MACHINE
Steel wire ropes are widely employed across numerous industries, particularly in aviation, where they are used in onboard cranes, winches, hoists, mechanical control systems, and cargo-securing tie-down assemblies. The mechanical performance of steel wire ropes is governed by the properties of their individual components. Steel wire is a primary structural element of these ropes. In service, wire ropes are exposed to cyclic operational loading during cargo lifting, movement, and handling, as well as additional dynamic loads caused by acceleration. In many cases, they also operate in unfavorable and aggressive environments. Together, these factors lead to fatigue, wear, and corrosion, critically influencing the service life and reliability of wire ropes. This study presents the development of a compact rotating-bending fatigue testing machine specifically designed to evaluate the fatigue behavior of steel wires. The base configuration is intended for laboratory testing at dry air; however, further upgrades will enable testing in aggressive corrosive media, various surfactants, greases, and corrosion-preventive compounds to investigate adsorption-induced weakening phenomena, including the Rebinder effect. Analytical stress calculations based on Reuleaux’s classical approach were validated by finite element modeling, demonstrating close agreement between the methods. The developed machine provides an efficient and reliable tool for studying fatigue mechanisms in steel wire materials under realistic operating conditions.
- 22 January 2026
- Published by State University "Kyiv Aviation Institute" in Problems of Friction and Wear
- No. 4(109),p. 61-69
ROTATING BENDING FATIGUE TEST MACHINE
Steel wire ropes are widely employed across numerous industries, particularly in aviation, where they are used in onboard cranes, winches, hoists, mechanical control systems, and cargo-securing tie-down assemblies. The mechanical performance of steel wire ropes is governed by the properties of their individual components. Steel wire is a primary structural element of these ropes. In service, wire ropes are exposed to cyclic operational loading during cargo lifting, movement, and handling, as well as additional dynamic loads caused by acceleration. In many cases, they also operate in unfavorable and aggressive environments. Together, these factors lead to fatigue, wear, and corrosion, critically influencing the service life and reliability of wire ropes. This study presents the development of a compact rotating-bending fatigue testing machine specifically designed to evaluate the fatigue behavior of steel wires. The base configuration is intended for laboratory testing at dry air; however, further upgrades will enable testing in aggressive corrosive media, various surfactants, greases, and corrosion-preventive compounds to investigate adsorption-induced weakening phenomena, including the Rebinder effect. Analytical stress calculations based on Reuleaux’s classical approach were validated by finite element modeling, demonstrating close agreement between the methods. The developed machine provides an efficient and reliable tool for studying fatigue mechanisms in steel wire materials under realistic operating conditions.
- Open Access
- 17 June 2025
- Published by State University "Kyiv Aviation Institute" in Problems of Friction and Wear
- No. 2(107),p. 11-18
МЕТОДИКИ ДОСЛІДЖЕННЯ СТАДІЙ ЗАРОДЖЕННЯ І РОЗПОВСЮДЖЕННЯ ТРІЩИН В АЛЮМІНІЄВИХ СПЛАВАХ В УМОВАХ ДІЇ ПОВЕРХНЕВО-АКТИВНИХ РЕЧОВИН
В статті розглянуто основи методик дослідження інкубаційної стадії втоми і стадії руйнування алюмінієвих сплавів в умовах їх контакту з поверхнево-активними речовинами, зокрема плівкоутворюючими антикорозійними сполуками. Проблема зумовлена зростаючою кількістю речовин, що взаємодіють з елементами літальних апаратів. Підкреслено актуальність вивчення поверхнево-активних речовин у зв’язку з їх потенційним негативним впливом на довговічність конструкцій при циклічному навантаженні. Розроблено методики дослідження інкубаційної стадії втоми шляхом аналізу деформаційного рельєфу поверхні з використанням комп’ютерної обробки зображень. Для вивчення стадії розповсюдження тріщин застосовано підходи механіки руйнування, зокрема визначення швидкості росту тріщин за рівнянням Періса. Встановлено доцільність роздільного вивчення обох стадій втоми для оцінки впливу поверхнево-активних сполук. Методики можуть бути використані при виборі поверхнево-активних речовин, зокрема антикорозійних сполук, мастил, олив, перетворювачів корозії, тощо. Метою роботи є обґрунтування критеріїв впливу поверхнево-активних речовин на обидві стадії втоми: інкубаційну і розповсюдження тріщин.
- 17 June 2025
- Published by State University "Kyiv Aviation Institute" in Problems of Friction and Wear
- No. 2(107),p. 11-18
Open AccessМЕТОДИКИ ДОСЛІДЖЕННЯ СТАДІЙ ЗАРОДЖЕННЯ І РОЗПОВСЮДЖЕННЯ ТРІЩИН В АЛЮМІНІЄВИХ СПЛАВАХ В УМОВАХ ДІЇ ПОВЕРХНЕВО-АКТИВНИХ РЕЧОВИН
В статті розглянуто основи методик дослідження інкубаційної стадії втоми і стадії руйнування алюмінієвих сплавів в умовах їх контакту з поверхнево-активними речовинами, зокрема плівкоутворюючими антикорозійними сполуками. Проблема зумовлена зростаючою кількістю речовин, що взаємодіють з елементами літальних апаратів. Підкреслено актуальність вивчення поверхнево-активних речовин у зв’язку з їх потенційним негативним впливом на довговічність конструкцій при циклічному навантаженні. Розроблено методики дослідження інкубаційної стадії втоми шляхом аналізу деформаційного рельєфу поверхні з використанням комп’ютерної обробки зображень. Для вивчення стадії розповсюдження тріщин застосовано підходи механіки руйнування, зокрема визначення швидкості росту тріщин за рівнянням Періса. Встановлено доцільність роздільного вивчення обох стадій втоми для оцінки впливу поверхнево-активних сполук. Методики можуть бути використані при виборі поверхнево-активних речовин, зокрема антикорозійних сполук, мастил, олив, перетворювачів корозії, тощо. Метою роботи є обґрунтування критеріїв впливу поверхнево-активних речовин на обидві стадії втоми: інкубаційну і розповсюдження тріщин.