Landep Ayuningtias
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Landep Ayuningtias has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Yun-Hi Kim
Department of Chemistry and RIMA Gyeongsang National University Jinju Republic of Korea
4 shared publications - Hoichang Yang
Department of Chemical Engineering Inha University Incheon Republic of Korea
2 shared publications - Hyun-Wook Kim
Department of Materials Science and Engineering, Seoul National University, Seoul, Republic of Korea
2 shared publications - Tae-Woo Lee
Department of Materials Science and Engineering Seoul National University Seoul Republic of Korea
2 shared publications Yooseong Ahn
Department of Chemical Engineering Inha University Incheon Republic of Korea
2 shared publications- Amara Arshad
Materials and Nanotechnology North Dakota State University Fargo North Dakota USA
1 shared publication
Latest Publications
- 13 November 2026
- Published by Wiley in Advanced Materials
Molecularly Programmed Stress Dissipation Strategy for Ultrastretchable Neuromorphic Electronics
Intrinsically stretchable organic synaptic transistors (ISOSTs) using semiconducting polymers (SPs) hold promise for on‐body signal processing by mimicking biological synaptic functions and processing temporal bio‐signals directly at or near the point of data acquisition. However, conventional SPs designed primarily to increase polymer softness and mechanical compliance often lack molecular‐level mechanisms for effective stress dissipation, thereby limiting device‐level stretchability to below 100% and causing substantial degradation in electrical performance. Here, we demonstrate ISOSTs achieving 150% device‐level stretchability through molecularly programmed stress dissipation (MPSD) of an SP without incorporating soft segments into the backbone. This strategy promotes conformational flexibility and suppresses side‐chain interdigitation, enhancing chain dynamics and amplifying mechanical contrast between crystalline and amorphous domains. This facilitates localized stress accommodation and induces the formation of nano‐to‐micro scale crack clusters, termed artificial stretch marks (ASMs), which emulate the adaptive mechanical behavior of human skin. Leveraging this mechanism, ISOSTs maintain 83.8% of maximum current even under 150% strain while preserving synaptic behaviors. Furthermore, physical reservoir computing using the ISOSTs preserves electromyography classification performance under 150% tensile strain. This work presents a biomimetic stress dissipation strategy for intrinsically stretchable and stress‐adaptive neuromorphic electronics.
- 13 November 2026
- Published by Wiley in Advanced Materials
Molecularly Programmed Stress Dissipation Strategy for Ultrastretchable Neuromorphic Electronics
Intrinsically stretchable organic synaptic transistors (ISOSTs) using semiconducting polymers (SPs) hold promise for on‐body signal processing by mimicking biological synaptic functions and processing temporal bio‐signals directly at or near the point of data acquisition. However, conventional SPs designed primarily to increase polymer softness and mechanical compliance often lack molecular‐level mechanisms for effective stress dissipation, thereby limiting device‐level stretchability to below 100% and causing substantial degradation in electrical performance. Here, we demonstrate ISOSTs achieving 150% device‐level stretchability through molecularly programmed stress dissipation (MPSD) of an SP without incorporating soft segments into the backbone. This strategy promotes conformational flexibility and suppresses side‐chain interdigitation, enhancing chain dynamics and amplifying mechanical contrast between crystalline and amorphous domains. This facilitates localized stress accommodation and induces the formation of nano‐to‐micro scale crack clusters, termed artificial stretch marks (ASMs), which emulate the adaptive mechanical behavior of human skin. Leveraging this mechanism, ISOSTs maintain 83.8% of maximum current even under 150% strain while preserving synaptic behaviors. Furthermore, physical reservoir computing using the ISOSTs preserves electromyography classification performance under 150% tensile strain. This work presents a biomimetic stress dissipation strategy for intrinsically stretchable and stress‐adaptive neuromorphic electronics.
- 24 September 2026
- Published by Wiley in Bulletin of the Korean Chemical Society
- Vol. 47 (10) , 1275-1281
Asymmetric steric engineering of anthracene emitters through phenyl‐p‐xylene bridging for deep‐blue fluorescent organic light‐emitting diodes
We report the molecular design, synthesis, and evaluation of an asymmetric anthracene emitter, namely JNXPAn, with a TTF‐compatible (Triplet–Triplet Fusion) molecular architecture aimed at achieving deep‐blue emission in fluorescent organic light‐emitting diodes (FOLEDs). To limit π‐conjugation extension while maintaining deep‐blue emission, the architecture incorporates phenyl–p‐xylene linkers. The steric hindrance from the methyl substituents enforces a highly twisted, near‐perpendicular geometry between the phenyl unit and adjacent anthracene rings. Modulating intermolecular packing through steric hindrance and molecular twisting has previously proven favorable for TTF activity in anthracene‐based fluorescent systems. Owing to the large dihedral angles in JNXPAn, the frontier molecular orbitals are predominantly localized on the central anthracene unit. Nondoped emission JNXPAn layers exhibited maximum external quantum efficiencies of 2.66% with Commission Internationale de L'Eclairage coordinates of (0.18, 0.09), confirming deep‐blue emission. These findings offer a concrete design strategy based on steric twisting through phenyl–p‐xylene bridging for the development of anthracene‐based deep‐blue FOLED emitters.
- 24 September 2026
- Published by Wiley in Bulletin of the Korean Chemical Society
- Vol. 47 (10) , 1275-1281
Asymmetric steric engineering of anthracene emitters through phenyl‐p‐xylene bridging for deep‐blue fluorescent organic light‐emitting diodes
We report the molecular design, synthesis, and evaluation of an asymmetric anthracene emitter, namely JNXPAn, with a TTF‐compatible (Triplet–Triplet Fusion) molecular architecture aimed at achieving deep‐blue emission in fluorescent organic light‐emitting diodes (FOLEDs). To limit π‐conjugation extension while maintaining deep‐blue emission, the architecture incorporates phenyl–p‐xylene linkers. The steric hindrance from the methyl substituents enforces a highly twisted, near‐perpendicular geometry between the phenyl unit and adjacent anthracene rings. Modulating intermolecular packing through steric hindrance and molecular twisting has previously proven favorable for TTF activity in anthracene‐based fluorescent systems. Owing to the large dihedral angles in JNXPAn, the frontier molecular orbitals are predominantly localized on the central anthracene unit. Nondoped emission JNXPAn layers exhibited maximum external quantum efficiencies of 2.66% with Commission Internationale de L'Eclairage coordinates of (0.18, 0.09), confirming deep‐blue emission. These findings offer a concrete design strategy based on steric twisting through phenyl–p‐xylene bridging for the development of anthracene‐based deep‐blue FOLED emitters.
- Top Cited Papers
- 14 January 2026
- Published by Springer Nature in Nature
- Vol. 649 (8097) , 604-611
Exciplex-enabled high-efficiency, fully stretchable OLEDs
Fully stretchable organic light-emitting diodes (OLEDs), composed entirely of intrinsically stretchable materials, are essential for on-skin displays1,2,3. However, their low device efficiency has been a persistent barrier to practical applications for more than a decade4. Here we addressed this challenge by incorporating an intrinsically stretchable exciplex-assisted phosphorescent (ExciPh) layer. The elastomer-tolerant triplet-recycling mechanism mitigates exciton energy transfer limitations arising from the insulating elastomer matrix, yielding a light-emitting layer with more than 200% stretchability and an external quantum efficiency (EQE) of 21.7%. To translate this performance to fully stretchable devices, we integrated MXene-contact stretchable electrodes (MCSEs), which feature high mechanical robustness and tunable work function (WF), ensuring efficient hole and electron injection. These advances enable fully stretchable OLEDs with a record EQE of 17.0% and minimal luminescence loss under 60% strain. This approach to designing high-efficiency, mechanically compliant optoelectronics will enable the next-generation wearable and deformable displays.
- 14 January 2026
- Published by Springer Nature in Nature
- Vol. 649 (8097) , 604-611
Top Cited PapersExciplex-enabled high-efficiency, fully stretchable OLEDs
Fully stretchable organic light-emitting diodes (OLEDs), composed entirely of intrinsically stretchable materials, are essential for on-skin displays1,2,3. However, their low device efficiency has been a persistent barrier to practical applications for more than a decade4. Here we addressed this challenge by incorporating an intrinsically stretchable exciplex-assisted phosphorescent (ExciPh) layer. The elastomer-tolerant triplet-recycling mechanism mitigates exciton energy transfer limitations arising from the insulating elastomer matrix, yielding a light-emitting layer with more than 200% stretchability and an external quantum efficiency (EQE) of 21.7%. To translate this performance to fully stretchable devices, we integrated MXene-contact stretchable electrodes (MCSEs), which feature high mechanical robustness and tunable work function (WF), ensuring efficient hole and electron injection. These advances enable fully stretchable OLEDs with a record EQE of 17.0% and minimal luminescence loss under 60% strain. This approach to designing high-efficiency, mechanically compliant optoelectronics will enable the next-generation wearable and deformable displays.
- 3 July 2025
- Published by Wiley in Bulletin of the Korean Chemical Society
- Vol. 46 (7) , 754-760
Synthesis and characterization of diketopyrrolopyrrole‐based conjugated polymer with biphenyl for organic photovoltaic cells
Designing a moderate band gap is sometimes intentionally chosen. When the donor polymer has a deeper HOMO level, a higher Voc can be gained which boosts total PCE in organic photovoltaics ( OPVs ) (Liao et al., Joule 2020 , 4 (1), 189–206; Mamba et al., J. Phys. Chem. A 2021 , 125 (50), 10593–10603; Choi and Jo, Org. Electron. 2013 , 14 (6), 1621–1628; Jo et al., Org. Electron. 2012 , 13 (10), 2185–2191). This is crucial in DPP ‐based copolymer frameworks, which frequently have short band gaps and may experience poor Voc. Since DPP is a low bandgap due to strong‐acceptor, thus, modifying it with weak donor units can raise the bandgap and lower the HOMO to make it suitable for multi‐junctions or higher Voc. We report the synthesis, properties, and photovoltaic applications of a donor‐acceptor (D‐A) conjugated copolymer based on diketopyrrolopyrrole ( DPP ) and biphenyl, namely PDDPPhenyl . This polymer exhibits broad absorption ranging from 400 to 900 nm with a band gap of 1.59 eV . As expected, a low HOMO level of −5.29 was gained by introducing biphenyl as a weaker donor. The optimized weight ratio goes to 1:4 for PDPPPhenyl : PC 71 BM with 3.8% PCE .
- 3 July 2025
- Published by Wiley in Bulletin of the Korean Chemical Society
- Vol. 46 (7) , 754-760
Synthesis and characterization of diketopyrrolopyrrole‐based conjugated polymer with biphenyl for organic photovoltaic cells
Designing a moderate band gap is sometimes intentionally chosen. When the donor polymer has a deeper HOMO level, a higher Voc can be gained which boosts total PCE in organic photovoltaics ( OPVs ) (Liao et al., Joule 2020 , 4 (1), 189–206; Mamba et al., J. Phys. Chem. A 2021 , 125 (50), 10593–10603; Choi and Jo, Org. Electron. 2013 , 14 (6), 1621–1628; Jo et al., Org. Electron. 2012 , 13 (10), 2185–2191). This is crucial in DPP ‐based copolymer frameworks, which frequently have short band gaps and may experience poor Voc. Since DPP is a low bandgap due to strong‐acceptor, thus, modifying it with weak donor units can raise the bandgap and lower the HOMO to make it suitable for multi‐junctions or higher Voc. We report the synthesis, properties, and photovoltaic applications of a donor‐acceptor (D‐A) conjugated copolymer based on diketopyrrolopyrrole ( DPP ) and biphenyl, namely PDDPPhenyl . This polymer exhibits broad absorption ranging from 400 to 900 nm with a band gap of 1.59 eV . As expected, a low HOMO level of −5.29 was gained by introducing biphenyl as a weaker donor. The optimized weight ratio goes to 1:4 for PDPPPhenyl : PC 71 BM with 3.8% PCE .