Bijun Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bijun Xie has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Mingyue Sun
Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
3 shared publications Dianzhong Li
Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People’s Republic of China
2 shared publicationsQianning Dai
Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research,Chinese Academy of Sciences, Shenyang 110016, People’s Republic of China
2 shared publicationsShaofei Ren
Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research,Chinese Academy of Sciences, Shenyang 110016, People’s Republic of China
2 shared publicationsYujie Song
Key Laboratory of Nuclear Materials and Safety Assessment, Institute of Metal Research,Chinese Academy of Sciences, Shenyang 110016, People’s Republic of China
2 shared publicationsBin Xu
Key Laboratory of Nuclear Materials and Safety Assessment Institute of Metal Research Chinese Academy of Sciences Shenyang 110016 China
1 shared publication
Latest Publications
- Open Access
- 2 April 2026
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 8 (4)
Controlled nanoscale intermetallic layer engineering enables ultrahigh interfacial strength-ductility synergy in maraging steel/Nb/high-entropy alloy composites
Interfacial reaction-induced intermetallic compounds (IMCs) are brittle and prone to trigger cracking, severely deteriorating the mechanical performance of composite interfaces. Overcoming IMC-induced embrittlement remains a longstanding challenge in interface design. Here, we counterintuitively leverage the IMCs by inducing their nanocrystallization to achieve ultrahigh interfacial strength-ductility synergy in the 18Ni350/Nb/AlNbTi3Zr1.5 composites. Specifically, a uniform and continuous nanostructured C14-type Fe2Nb interfacial reactive layer (IRL) is engineered at the 18Ni350/Nb interface through the in-situ nanoscale reaction. In contrast to the coarse-grained Fe2Nb IRL characterized by pronounced brittleness, this well-developed nanocrystalline Fe2Nb IRL exhibits superior strength and plasticity by activating grain rotation, stacking fault-mediated slip, and phase transformation-induced plasticity. These deformation mechanisms, originated from the nanostructuring and element doping of Fe2Nb, promote stress relaxation, uniform deformation, and crack blunting during the deformation process of the composite interface, thereby mitigating the brittleness of IMCs. Concurrently, the excellent thermodynamic inter-solubility of Ti, Zr, and Nb fosters a robust metallic bond without forming IMCs at the Nb/AlNbTi3Zr1.5 interface, which enhances compatible deformation by facilitating interfacial dislocation emission and movement, alleviating strain concentration, and preventing premature cracking during mechanical loading. Our findings reveal the significant potential of nanocrystallization engineering in overcoming the interfacial brittleness of IMCs and provide a new strategy for designing ultrahigh-strength dissimilar interfaces.
- 2 April 2026
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 8 (4)
Open AccessControlled nanoscale intermetallic layer engineering enables ultrahigh interfacial strength-ductility synergy in maraging steel/Nb/high-entropy alloy composites
Interfacial reaction-induced intermetallic compounds (IMCs) are brittle and prone to trigger cracking, severely deteriorating the mechanical performance of composite interfaces. Overcoming IMC-induced embrittlement remains a longstanding challenge in interface design. Here, we counterintuitively leverage the IMCs by inducing their nanocrystallization to achieve ultrahigh interfacial strength-ductility synergy in the 18Ni350/Nb/AlNbTi3Zr1.5 composites. Specifically, a uniform and continuous nanostructured C14-type Fe2Nb interfacial reactive layer (IRL) is engineered at the 18Ni350/Nb interface through the in-situ nanoscale reaction. In contrast to the coarse-grained Fe2Nb IRL characterized by pronounced brittleness, this well-developed nanocrystalline Fe2Nb IRL exhibits superior strength and plasticity by activating grain rotation, stacking fault-mediated slip, and phase transformation-induced plasticity. These deformation mechanisms, originated from the nanostructuring and element doping of Fe2Nb, promote stress relaxation, uniform deformation, and crack blunting during the deformation process of the composite interface, thereby mitigating the brittleness of IMCs. Concurrently, the excellent thermodynamic inter-solubility of Ti, Zr, and Nb fosters a robust metallic bond without forming IMCs at the Nb/AlNbTi3Zr1.5 interface, which enhances compatible deformation by facilitating interfacial dislocation emission and movement, alleviating strain concentration, and preventing premature cracking during mechanical loading. Our findings reveal the significant potential of nanocrystallization engineering in overcoming the interfacial brittleness of IMCs and provide a new strategy for designing ultrahigh-strength dissimilar interfaces.
- Open Access
- 27 October 2025
- Published by Wiley in Advanced Science
- Vol. 13 (3) , e10808
Aging‐Induced Ductile‐Brittle‐Ductile Transition in High‐Entropy Alloys and its Implications
Temper embrittlement, characterized by a dramatic loss of ductility within a narrow temperature window, is ubiquitous in conventional alloys but is not reported in compositionally complex or high‐entropy alloy systems. Here, an unexpected ductile–brittle–ductile transition is discovered in a multiphase high‐entropy alloy (HEA) aged in an intermediate temperature regime. Unlike the classical thermal embrittlement driven by grain boundary effects, this transition originates from the dynamic evolution of local chemical order (LCO) and phase boundary (PB) configurations in HEAs. Aging within the embrittlement‐prone regime enhances chemical ordering, increases the density of ordered domains, and induces jagged PBs, collectively triggering plastic instability and the ductile−to−brittle transition. In contrast, aging outside this regime suppresses excessive ordering and promotes the formation of ductile interphase transition zones, facilitating a brittle−to−ductile recovery. The findings offer new insights into the thermal behavior of HEAs and challenge the established paradigm of thermal embrittlement. These insights provide valuable guidance for the design and processing of high‐performance HEAs, thereby unlocking their potential as advanced high‐temperature structural materials.
- 27 October 2025
- Published by Wiley in Advanced Science
- Vol. 13 (3) , e10808
Open AccessAging‐Induced Ductile‐Brittle‐Ductile Transition in High‐Entropy Alloys and its Implications
Temper embrittlement, characterized by a dramatic loss of ductility within a narrow temperature window, is ubiquitous in conventional alloys but is not reported in compositionally complex or high‐entropy alloy systems. Here, an unexpected ductile–brittle–ductile transition is discovered in a multiphase high‐entropy alloy (HEA) aged in an intermediate temperature regime. Unlike the classical thermal embrittlement driven by grain boundary effects, this transition originates from the dynamic evolution of local chemical order (LCO) and phase boundary (PB) configurations in HEAs. Aging within the embrittlement‐prone regime enhances chemical ordering, increases the density of ordered domains, and induces jagged PBs, collectively triggering plastic instability and the ductile−to−brittle transition. In contrast, aging outside this regime suppresses excessive ordering and promotes the formation of ductile interphase transition zones, facilitating a brittle−to−ductile recovery. The findings offer new insights into the thermal behavior of HEAs and challenge the established paradigm of thermal embrittlement. These insights provide valuable guidance for the design and processing of high‐performance HEAs, thereby unlocking their potential as advanced high‐temperature structural materials.
- Open Access
Cerium Addition Enhances Impact Energy Stability in S355NL Steel by Tailoring Microstructure and Inclusions
S355NL structural steel is extensively employed in bridges, ships, and power station equipment owing to its excellent tensile strength, weldability, and low-temperature toughness. However, pronounced fluctuations in its Charpy impact energy at low temperatures significantly compromise the reliability and service life of critical components. In this study, vacuum-induction-melted ingots of S355NL steel containing 0–0.086 wt.% rare earth cerium were prepared. The effects of Ce on microstructures, inclusions, and impact toughness were systematically investigated using optical microscopy (OM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and Charpy V-notch testing. The results indicate that appropriate Ce additions (0.0011–0.0049 wt.%) refine the average grain size from 5.27 μm to 4.88 μm, reduce the pearlite interlamellar spacing from 204 nm to 169 nm, and promote the transformation of large-size Al2O3-MnS composite inclusions into fine, spherical, Ce-rich oxysulfides. Charpy V-notch tests at –50 °C reveal that 0.0011 wt.% Ce enhances both longitudinal (269.7 J) and transverse (257.4 J) absorbed energies while minimizing anisotropy (E_t/E_l = 1.01). Conversely, excessive Ce addition (0.086 wt.%) leads to coarse inclusions and deteriorates impact performance. These findings establish an optimal Ce window (0.0011–0.0049 wt.%) for microstructural and inclusion engineering to enhance the low-temperature impact toughness of S355NL steel.
Open AccessCerium Addition Enhances Impact Energy Stability in S355NL Steel by Tailoring Microstructure and Inclusions
S355NL structural steel is extensively employed in bridges, ships, and power station equipment owing to its excellent tensile strength, weldability, and low-temperature toughness. However, pronounced fluctuations in its Charpy impact energy at low temperatures significantly compromise the reliability and service life of critical components. In this study, vacuum-induction-melted ingots of S355NL steel containing 0–0.086 wt.% rare earth cerium were prepared. The effects of Ce on microstructures, inclusions, and impact toughness were systematically investigated using optical microscopy (OM), scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and Charpy V-notch testing. The results indicate that appropriate Ce additions (0.0011–0.0049 wt.%) refine the average grain size from 5.27 μm to 4.88 μm, reduce the pearlite interlamellar spacing from 204 nm to 169 nm, and promote the transformation of large-size Al2O3-MnS composite inclusions into fine, spherical, Ce-rich oxysulfides. Charpy V-notch tests at –50 °C reveal that 0.0011 wt.% Ce enhances both longitudinal (269.7 J) and transverse (257.4 J) absorbed energies while minimizing anisotropy (E_t/E_l = 1.01). Conversely, excessive Ce addition (0.086 wt.%) leads to coarse inclusions and deteriorates impact performance. These findings establish an optimal Ce window (0.0011–0.0049 wt.%) for microstructural and inclusion engineering to enhance the low-temperature impact toughness of S355NL steel.