Matthieu Cordier
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Matthieu Cordier has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Christophe Changenet
LabECAM, ECAM LaSalle Campus de Lyon, Université de Lyon, 69321 Lyon, France
1 shared publication - Fabrice Ville
INSA Lyon
1 shared publication - Fida Majdoub
LabECAM, ECAM La Salle, Université de Lyon, Lyon, France
1 shared publication - Jérôme Cavoret
INSA Lyon, CNRS, LaMCoS, UMR5259, 69621 Villeurbanne, France
1 shared publication - Yasser Diab
LabECAM, ECAM LaSalle Campus de Lyon, Université de Lyon, 69321 Lyon, France
1 shared publication
Latest Publications
- Open Access
- 31 July 2025
- Published by MDPI AG in Lubricants
- Vol. 13 (8) , 340
An Experimental Study on the Impact of Roughness Orientation on the Friction Coefficient in EHL Contact
Optimising the friction coefficient helps reduce friction losses and improve the efficiency of mechanical systems. The purpose of this study is to experimentally investigate the impact of roughness orientation on the friction coefficient in elastohydrodynamic (EHD) contact. Tests were carried out on a twin-disc machine. Three pairs of discs of identical material (nitrided steel) and geometry were tested: a smooth pair (the root mean square surface roughness Sq = 0.07 µm), a pair with transverse roughness and another with longitudinal roughness. The two rough pairs have similar roughness amplitudes (Sq = 0.5 µm). A comparison of the friction generated by these different pairs was carried out to highlight the effect of the roughness orientation under different operating conditions (oil injection temperature from 60 to 80 °C, Hertzian pressure from 1.2 to 1.5 GPa and mean rolling speed from 5 to 30 m/s). Throughout all the tests conducted in this study, longitudinal roughness resulted in higher friction than transverse, with an increase of up to 30%. Moreover, longitudinal roughness is more sensitive to variations in operating conditions. Finally, in all tests, the asperities of longitudinal roughness were found to influence the friction behaviour, unlike transverse roughness.
- 31 July 2025
- Published by MDPI AG in Lubricants
- Vol. 13 (8) , 340
Open AccessAn Experimental Study on the Impact of Roughness Orientation on the Friction Coefficient in EHL Contact
Optimising the friction coefficient helps reduce friction losses and improve the efficiency of mechanical systems. The purpose of this study is to experimentally investigate the impact of roughness orientation on the friction coefficient in elastohydrodynamic (EHD) contact. Tests were carried out on a twin-disc machine. Three pairs of discs of identical material (nitrided steel) and geometry were tested: a smooth pair (the root mean square surface roughness Sq = 0.07 µm), a pair with transverse roughness and another with longitudinal roughness. The two rough pairs have similar roughness amplitudes (Sq = 0.5 µm). A comparison of the friction generated by these different pairs was carried out to highlight the effect of the roughness orientation under different operating conditions (oil injection temperature from 60 to 80 °C, Hertzian pressure from 1.2 to 1.5 GPa and mean rolling speed from 5 to 30 m/s). Throughout all the tests conducted in this study, longitudinal roughness resulted in higher friction than transverse, with an increase of up to 30%. Moreover, longitudinal roughness is more sensitive to variations in operating conditions. Finally, in all tests, the asperities of longitudinal roughness were found to influence the friction behaviour, unlike transverse roughness.