Shuhrat Ahmadjonovich Mutalov
Research Subjects
Shuhrat Ahmadjonovich Mutalov has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Alisher Rakhimov
Department of Industrial Engineering and Management, Karshi State Technical University, Karshi 180100, Uzbekistan
2 shared publications - Jaloliddin Eshbobaev
Department of Automation and Digital Control, Tashkent Institute of Chemical Technology, Tashkent 100011, Uzbekistan
2 shared publications - Ahror Tuychiev
Department of Industrial Engineering and Management, Karshi State Technical University, 225, Mustakillik Shoh Street, Karshi 180100, Uzbekistan
1 shared publication - Alisher Jabborov
Department of Automation and Digital Control, Tashkent Chemical-Technological Institute, Tashkent 100011, Uzbekistan
1 shared publication - Farrukh Bakhtiyorovich Igitov
Tashkent institute of chemical technology. Address: Navoi Street, 32, Tashkent, Uzbekistan, 100011., Phone: +998995382862
1 shared publication - Hasan Siddiq Ugli Murodov
Karshi State Technical University. Address: 20, Shahrisabz street, Shahrisabz, Uzbekistan, 181306., Phone: +998995962486
1 shared publication
Latest Publications
- Open Access
- 20 January 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 117 (1) , 28
Development of an ANFIS-Based Intelligent Control System for Free Chlorine Removal from Industrial Wastewater Using Ion-Exchange Resin
The removal of residual free chlorine ions from industrial wastewater is a critical step toward achieving sustainable and environmentally compliant water reuse. Excess chlorine in sludge collector water causes corrosion of process equipment, inhibits biological treatment, and leads to toxic discharge effects. In this study, an intelligent control strategy was developed for an ion-exchange-based dechlorination process to dynamically regulate chlorine concentration in the effluent stream. A pilot-scale ion-exchange filtration unit, designed with a nominal capacity of 500 L h−1, was constructed using a strong-base anion-exchange resin to selectively adsorb chloride and free chlorine ions. A total of 200 experimental observations were obtained to characterize the nonlinear relationship between inlet flow rate and outlet chlorine concentration under varying operational conditions. Based on these experimental data, an Adaptive Neuro-Fuzzy Inference System (ANFIS) model was developed in MATLABR2025 to simulate and control the ion-exchange process. Two model-optimization techniques, Grid Partition + Hybrid and Subtractive Clustering + Hybrid, were applied. The subtractive clustering approach demonstrated faster convergence and superior accuracy, achieving RMSE = 0.147 mg L−1, MAE = 0.101 mg L−1, and R2 = 0.993, outperforming the grid-partition model (RMSE ≈ 0.29, R2 ≈ 0.97). The resulting ANFIS model was subsequently integrated into a MATLAB/Simulink-based intelligent control system for real-time regulation of chlorine concentration. A comparative dynamic simulation was performed between the proposed ANFIS controller and a conventional PID (Proportional-Differential-Integral) controller. The results revealed that the ANFIS controller achieved a faster response (rise time ≈ 28 s), lower overshoot (≈6%), and shorter settling time (≈90 s) compared to the PID controller (rise time ≈ 35 s, overshoot ≈ 18%, settling time ≈ 120 s). These improvements demonstrate the ability of the proposed model to adapt to nonlinear process behavior and to maintain stable operation under varying flow conditions.
- 20 January 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 117 (1) , 28
Open AccessDevelopment of an ANFIS-Based Intelligent Control System for Free Chlorine Removal from Industrial Wastewater Using Ion-Exchange Resin
The removal of residual free chlorine ions from industrial wastewater is a critical step toward achieving sustainable and environmentally compliant water reuse. Excess chlorine in sludge collector water causes corrosion of process equipment, inhibits biological treatment, and leads to toxic discharge effects. In this study, an intelligent control strategy was developed for an ion-exchange-based dechlorination process to dynamically regulate chlorine concentration in the effluent stream. A pilot-scale ion-exchange filtration unit, designed with a nominal capacity of 500 L h−1, was constructed using a strong-base anion-exchange resin to selectively adsorb chloride and free chlorine ions. A total of 200 experimental observations were obtained to characterize the nonlinear relationship between inlet flow rate and outlet chlorine concentration under varying operational conditions. Based on these experimental data, an Adaptive Neuro-Fuzzy Inference System (ANFIS) model was developed in MATLABR2025 to simulate and control the ion-exchange process. Two model-optimization techniques, Grid Partition + Hybrid and Subtractive Clustering + Hybrid, were applied. The subtractive clustering approach demonstrated faster convergence and superior accuracy, achieving RMSE = 0.147 mg L−1, MAE = 0.101 mg L−1, and R2 = 0.993, outperforming the grid-partition model (RMSE ≈ 0.29, R2 ≈ 0.97). The resulting ANFIS model was subsequently integrated into a MATLAB/Simulink-based intelligent control system for real-time regulation of chlorine concentration. A comparative dynamic simulation was performed between the proposed ANFIS controller and a conventional PID (Proportional-Differential-Integral) controller. The results revealed that the ANFIS controller achieved a faster response (rise time ≈ 28 s), lower overshoot (≈6%), and shorter settling time (≈90 s) compared to the PID controller (rise time ≈ 35 s, overshoot ≈ 18%, settling time ≈ 120 s). These improvements demonstrate the ability of the proposed model to adapt to nonlinear process behavior and to maintain stable operation under varying flow conditions.
- Open Access
- 30 June 2025
- Published by Tashkent State Technical University named after Islam Karimov - DIGITAL COMMONS JOURNALS in Chemical Technology, Control and Management
- Vol. 2025 (3) , 71-78
DEVELOPMENT OF AN ANN-BASED PREDICTIVE MODEL FOR THE EFFICIENT TREATMENT OF INDUSTRIAL WASTEWATER
The effective removal of free chlorine ions from industrial wastewater is critical to ensure process safety, minimize equipment corrosion, and protect aquatic environments. In this study, a laboratory-scale activated carbon filtration system was developed and tested to treat chlorine-contaminated water collected from sludge collectors at industrial facilities. A total of 200 experimental trials were conducted under varied operational conditions, including changes in flow rate, initial chlorine concentration, pressure, pH, temperature, and activated carbon dosage. The resulting dataset was used to train a predictive model based on a feedforward backpropagation artificial neural network (ANN) implemented in MATLAB. The ANN model demonstrated excellent performance, achieving a mean squared error (MSE) of 9.63 × 10⁻⁵ and a high regression coefficient (R = 0.9665) across all data. The model’s predictive capability was validated through detailed performance plots, error histograms, and regression analysis. The results confirm that the ANN can reliably estimate residual chlorine concentrations based on key process variables, making it a valuable tool for optimizing activated carbon filter operations and enhancing intelligent control in industrial wastewater treatment systems. This research highlights the potential of integrating AI-based modeling with traditional water purification technologies to improve process efficiency and environmental sustainability.
- 30 June 2025
- Published by Tashkent State Technical University named after Islam Karimov - DIGITAL COMMONS JOURNALS in Chemical Technology, Control and Management
- Vol. 2025 (3) , 71-78
Open AccessDEVELOPMENT OF AN ANN-BASED PREDICTIVE MODEL FOR THE EFFICIENT TREATMENT OF INDUSTRIAL WASTEWATER
The effective removal of free chlorine ions from industrial wastewater is critical to ensure process safety, minimize equipment corrosion, and protect aquatic environments. In this study, a laboratory-scale activated carbon filtration system was developed and tested to treat chlorine-contaminated water collected from sludge collectors at industrial facilities. A total of 200 experimental trials were conducted under varied operational conditions, including changes in flow rate, initial chlorine concentration, pressure, pH, temperature, and activated carbon dosage. The resulting dataset was used to train a predictive model based on a feedforward backpropagation artificial neural network (ANN) implemented in MATLAB. The ANN model demonstrated excellent performance, achieving a mean squared error (MSE) of 9.63 × 10⁻⁵ and a high regression coefficient (R = 0.9665) across all data. The model’s predictive capability was validated through detailed performance plots, error histograms, and regression analysis. The results confirm that the ANN can reliably estimate residual chlorine concentrations based on key process variables, making it a valuable tool for optimizing activated carbon filter operations and enhancing intelligent control in industrial wastewater treatment systems. This research highlights the potential of integrating AI-based modeling with traditional water purification technologies to improve process efficiency and environmental sustainability.