Kostiantyn Militskyi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kostiantyn Militskyi has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Denys Khokhlin1 shared publication
O. Demyanenko
State Enterprise "Scientific Research Institute of Building Production named after V.S. Balytskyi," Kyiv
1 shared publication- Olena Demydova
Kyiv National University of Construction and Architecture, Ukraine
1 shared publication
Latest Publications
- Open Access
- 27 November 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 3 (56) , 61-67
Theoretical and methodological principles of classification of functional failures of buildings and their structural elements during theoretical inspection
The article explores the theoretical and methodological principles of ensuring the operational reliability of buildings through the implementation of the concept of functional failure of buildings or their structural systems. The relevance of the work is due to the need to modernize the tools for technical inspection of objects that have been exposed to unforeseen impacts as a result of hostilities, where the nature of the loads significantly deviates from standard design scenarios. The article emphasizes the importance of transitioning to a systematic analysis of physical failure mechanisms. The purpose of the study is to scientifically substantiate and systematize the types of functional failures of load-bearing structures using a more expanded approach. In the work, functional failure is considered as a state in which the structure loses its ability to meet design requirements and tolerances, even if a satisfactory visual condition is maintained. The scientific novelty lies in the development of a comprehensive classification based on the analysis of the technological nature, causes of occurrence, rate of degradation and the scale of the consequences of failures. The analysis of the technological nature allowed us to distinguish the levels of degradation: from the initial deterioration of operational parameters to the occurrence of excessive deformations and critical loss of bearing capacity. Special attention was paid to the separation and expansion of internal factors associated with design and technological errors and external factors caused by extreme mechanical loads and blast waves. It was proven that the speed of the system's transition to a failure state determines the model of further monitoring, where gradual processes allow for preventive measures, and sudden failures require specific methods of instant diagnostics. Classification by consequences allows us to assess the degree of risk for operation, distinguishing between local defects, limitations in performance and complete systemic destabilization caused by a chain reaction of loss of stability of key load-bearing structures. The practical significance of the results lies in creating a theoretical basis for increasing the objectivity of expert conclusions and predicting the residual bearing capacity of structures. The proposed typification serves as a foundation for choosing sound strategies for the restoration, strengthening or dismantling of objects in the process of post-war reconstruction of Ukraine. A systematic approach to classification allows us to take into account not only visual damage, but also the gradual deterioration of structural integrity, ensuring the mechanical safety of construction objects in the post-war period.
- 27 November 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 3 (56) , 61-67
Open AccessTheoretical and methodological principles of classification of functional failures of buildings and their structural elements during theoretical inspection
The article explores the theoretical and methodological principles of ensuring the operational reliability of buildings through the implementation of the concept of functional failure of buildings or their structural systems. The relevance of the work is due to the need to modernize the tools for technical inspection of objects that have been exposed to unforeseen impacts as a result of hostilities, where the nature of the loads significantly deviates from standard design scenarios. The article emphasizes the importance of transitioning to a systematic analysis of physical failure mechanisms. The purpose of the study is to scientifically substantiate and systematize the types of functional failures of load-bearing structures using a more expanded approach. In the work, functional failure is considered as a state in which the structure loses its ability to meet design requirements and tolerances, even if a satisfactory visual condition is maintained. The scientific novelty lies in the development of a comprehensive classification based on the analysis of the technological nature, causes of occurrence, rate of degradation and the scale of the consequences of failures. The analysis of the technological nature allowed us to distinguish the levels of degradation: from the initial deterioration of operational parameters to the occurrence of excessive deformations and critical loss of bearing capacity. Special attention was paid to the separation and expansion of internal factors associated with design and technological errors and external factors caused by extreme mechanical loads and blast waves. It was proven that the speed of the system's transition to a failure state determines the model of further monitoring, where gradual processes allow for preventive measures, and sudden failures require specific methods of instant diagnostics. Classification by consequences allows us to assess the degree of risk for operation, distinguishing between local defects, limitations in performance and complete systemic destabilization caused by a chain reaction of loss of stability of key load-bearing structures. The practical significance of the results lies in creating a theoretical basis for increasing the objectivity of expert conclusions and predicting the residual bearing capacity of structures. The proposed typification serves as a foundation for choosing sound strategies for the restoration, strengthening or dismantling of objects in the process of post-war reconstruction of Ukraine. A systematic approach to classification allows us to take into account not only visual damage, but also the gradual deterioration of structural integrity, ensuring the mechanical safety of construction objects in the post-war period.
- Open Access
- 25 November 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (56)
Application of residential and public building dynamic characteristic assessment for diagnostics and monitoring of their technical condition
A significant number of studies of dynamic characteristics for different types of buildings and their structures in different states have been reviewed. It is noted that the allocation of specific generally applicable values of the oscillation periods (frequencies), which would allow to unambiguously characterizing the state of a structural system of a certain type, is problematic, because the dynamic characteristics depend on too many factors. At the same time, the use of averaged results of a sufficiently large group of different formulas of oscillation period experimental dependences on the main parameters of the structure can provide a fairly accurate value of the building oscillation expected period. It is also important to assess the impact of possible changes in the mass of the structure. It was determined that for residential and public buildings, the impact of a possible change in mass during operation on the frequency of natural oscillations can be estimated at approximately 5%. In the case of measuring the basic (starting) natural oscillation frequency of a completed but not commissioned building, a correction factor of 0.95 should be applied for comparison with subsequent measurements already during operation. It is noted that measurements of horizontal vibration characteristics are indicative and sensitive, first of all, to the state of vertical load-bearing structures, the rigidity of which most affects the period of such vibrations. Measurements of the characteristics of natural vibrations in horizontal directions will be most effective for assessing changes in the state of structures with a rigid structural system and frame structure without vertical ties, as well as the parameters of vertical vibrations of large-span floor and roof structures. According to the studies considered, the reduction in the vibration frequency of rigid stone (as a rule) residential and public buildings, significantly damaged by deformations of the foundation or earthquake (including up to an emergency state) was approximately 0.57…0.89, depending, first of all, on the building height and the damage degree. Based on experimental data, tables of approximate values of permissible reduction coefficients of the initial (relative to the beginning of operation) natural vibration frequency of public and residential buildings with a rigid structural system for technical condition categories and for similar buildings with a reinforced concrete flexible structural system are proposed. Further measures for the operation of the building are proposed based on the assessment of the technical condition category based on the results of measuring the building natural vibration frequencies. The development of methods for assessing the dynamic characteristics of buildings for diagnosing the technical condition of structures damaged by off-design influences, including the improvement of organizational and methodological tools for inspection with the aim of increasing the efficiency of recovering damaged objects, is proposed and considered.
- 25 November 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (56)
Open AccessApplication of residential and public building dynamic characteristic assessment for diagnostics and monitoring of their technical condition
A significant number of studies of dynamic characteristics for different types of buildings and their structures in different states have been reviewed. It is noted that the allocation of specific generally applicable values of the oscillation periods (frequencies), which would allow to unambiguously characterizing the state of a structural system of a certain type, is problematic, because the dynamic characteristics depend on too many factors. At the same time, the use of averaged results of a sufficiently large group of different formulas of oscillation period experimental dependences on the main parameters of the structure can provide a fairly accurate value of the building oscillation expected period. It is also important to assess the impact of possible changes in the mass of the structure. It was determined that for residential and public buildings, the impact of a possible change in mass during operation on the frequency of natural oscillations can be estimated at approximately 5%. In the case of measuring the basic (starting) natural oscillation frequency of a completed but not commissioned building, a correction factor of 0.95 should be applied for comparison with subsequent measurements already during operation. It is noted that measurements of horizontal vibration characteristics are indicative and sensitive, first of all, to the state of vertical load-bearing structures, the rigidity of which most affects the period of such vibrations. Measurements of the characteristics of natural vibrations in horizontal directions will be most effective for assessing changes in the state of structures with a rigid structural system and frame structure without vertical ties, as well as the parameters of vertical vibrations of large-span floor and roof structures. According to the studies considered, the reduction in the vibration frequency of rigid stone (as a rule) residential and public buildings, significantly damaged by deformations of the foundation or earthquake (including up to an emergency state) was approximately 0.57…0.89, depending, first of all, on the building height and the damage degree. Based on experimental data, tables of approximate values of permissible reduction coefficients of the initial (relative to the beginning of operation) natural vibration frequency of public and residential buildings with a rigid structural system for technical condition categories and for similar buildings with a reinforced concrete flexible structural system are proposed. Further measures for the operation of the building are proposed based on the assessment of the technical condition category based on the results of measuring the building natural vibration frequencies. The development of methods for assessing the dynamic characteristics of buildings for diagnosing the technical condition of structures damaged by off-design influences, including the improvement of organizational and methodological tools for inspection with the aim of increasing the efficiency of recovering damaged objects, is proposed and considered.
- Open Access
- 1 August 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 79,p. 60-65
ORGANIZATIONAL AND METHODOLOGICAL TOOLKIT FOR INSPECTION OF THE TECHNICAL CONDITION OF INDUSTRIAL FLOORS
This article examines the operational characteristics of industrial floors, which play a key role in ensuring the smooth operation of technological processes and the stability of the functioning of enterprises and logistics centers. In modern conditions, such structures are subject to high requirements for strength, wear resistance, thermal stability, as well as resistance to moisture and chemicals. However, a significant part of industrial floors in Ukraine is created without taking into account modern loads and dynamic influences, which leads to the occurrence of defects and damage during operation. The problem arises from the obsolescence of the regulatory framework, in particular SNiP 2.03.13-88 "Floors", as well as from the inclusion of adaptation of national standards to international ISO standards, which complicates the harmonization and implementation of modern technologies for the design and use of floors. The article analyzes modern approaches to inspecting the technical condition of industrial floors, taking into account modern methods of visual and instrumental research. The types of floor structures were determined, their real strength was investigated, defects and damage were detected, which are carried out due to violations of technological standards, imperfection of the design and quality of materials. The microscopic and diffractometric study showed significant unevenness of the mineral composition and low level of stability of concrete. The main factors of destruction are violations of technology in the manufacture of concrete, improper design, irresponsibility for the quality of materials and the demonstration of a modern control system during operation. The detected defects and damage reduce the service life of the floor and require urgent repair and modernization of the regulatory framework. Taking into account the above-mentioned features, the relevance of improving organizational and methodological approaches to the inspection and assessment of the technical condition of industrial floors in order to increase their durability, safety and efficiency of operation is emphasized. It is necessary to develop new standards, improve research methods and involve modern materials and technologies to improve the quality of design, construction and maintenance of such structures.
- 1 August 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 79,p. 60-65
Open AccessORGANIZATIONAL AND METHODOLOGICAL TOOLKIT FOR INSPECTION OF THE TECHNICAL CONDITION OF INDUSTRIAL FLOORS
This article examines the operational characteristics of industrial floors, which play a key role in ensuring the smooth operation of technological processes and the stability of the functioning of enterprises and logistics centers. In modern conditions, such structures are subject to high requirements for strength, wear resistance, thermal stability, as well as resistance to moisture and chemicals. However, a significant part of industrial floors in Ukraine is created without taking into account modern loads and dynamic influences, which leads to the occurrence of defects and damage during operation. The problem arises from the obsolescence of the regulatory framework, in particular SNiP 2.03.13-88 "Floors", as well as from the inclusion of adaptation of national standards to international ISO standards, which complicates the harmonization and implementation of modern technologies for the design and use of floors. The article analyzes modern approaches to inspecting the technical condition of industrial floors, taking into account modern methods of visual and instrumental research. The types of floor structures were determined, their real strength was investigated, defects and damage were detected, which are carried out due to violations of technological standards, imperfection of the design and quality of materials. The microscopic and diffractometric study showed significant unevenness of the mineral composition and low level of stability of concrete. The main factors of destruction are violations of technology in the manufacture of concrete, improper design, irresponsibility for the quality of materials and the demonstration of a modern control system during operation. The detected defects and damage reduce the service life of the floor and require urgent repair and modernization of the regulatory framework. Taking into account the above-mentioned features, the relevance of improving organizational and methodological approaches to the inspection and assessment of the technical condition of industrial floors in order to increase their durability, safety and efficiency of operation is emphasized. It is necessary to develop new standards, improve research methods and involve modern materials and technologies to improve the quality of design, construction and maintenance of such structures.