DKDenys Khokhlin

Denys Khokhlin

*This is an algorithmically generated author record based on publicly available information.

Denys Khokhlin has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Using the finite element method to determine the possibility of application and improvement of organizational and technological solutions for localization of destroyments caused by influences not foreseeed during design

    by Oleksii Tugai, Andrii Kozak, Denys Khokhlin, Mykhailo Bozhynskyi

    The article examines the impact of off-design loads on the structures of an industrial building that was damaged but retained its overall stability. The generalized predictive and computational model is considered as a simplified transition from the physical system of an industrial building to a mathematical model used to assess the current state of structures and predict the possible development of damage. An effective approach to building such a model involves the use of the finite element method (FEM), which allows for the formalization of complex spatial systems by dividing them into components of simple geometry. The predictive and computational model, built based on FEM, provides the ability not only to analyze the current state of damaged structures, but also to predict their further behavior under the influence of variable loading conditions. This allows it to be used as a tool for making informed technical decisions in the process of eliminating the consequences of off-design impacts. An algorithmic sequence of actions for building an information and mathematical predictive and calculation model (using the example of a reinforced concrete truss of an industrial structure) in the environment of a calculation complex is proposed, which allows assessing the change in the technical condition of structural elements after the action of an off-design impact. An example of a corresponding calculation of a predictive and calculation model of a truss with a span of 24 m is given, the main tasks of which were: checking the absence of general destruction of its structure in the event of loss of an element at different stages of temporary reinforcement using an assembly platform and steel risers; determining the efficiency of unloading a damaged truss with this reinforcement, taking into account the limitation of the total allowable load transmitted by the risers to the assembly platform. A significant advantage (in the required total effort in the unloading risers) of the one-rise variant compared to two was found. This advantage increases from approximately 5% to 3 times when changing the location of the missing truss element from the edge to the middle of the truss. The planned level of truss unloading can be fully achieved with the use of a single riser for two of the four damage patterns and 88% for the other two. The options using 2 risers are significantly less effective (33-85% of the planned level of unloading). No cases of total truss failure were identified for any option and at any stage of the calculation.

  • Open Access

    Impact of reduced rigidity of damaged structures on the main dynamic characteristics of reinforced concrete residential building

    by Vladyslav Basanskyi, Denys Khokhlin, Mykhailo Bozhynskyi

    The article considers the specifics of reduced rigidity impact of damaged structures on the main dynamic characteristics of the structural system using the example of a reinforced concrete residential building for the further development of recommendations for planning dynamic monitoring of the technical condition of similar buildings. A dynamic calculation was performed for a building with a cohesive monolithic reinforced concrete frame with 10 above-ground floors and standard architectural, planning, and structural solutions for earthquake-resistant buildings. Considering that the impact of damage to individual structures (including individual sections of walls) on the dynamic characteristics of the building as a whole is, as a rule, insignificant, to assess the impact of damage at different levels (floors) of the structural system, their distribution was assumed for all wall structures (diaphragms) within one floor. It has been found that the greatest effectiveness of dynamic monitoring using the “free vibration” method for residential and public buildings can be achieved when determining significant areas of damage to load-bearing structures that significantly affect the overall rigidity of the structural system at the lower height levels of the system (base and foundation, lower floors of the building). At the same time, provided that the equipment has sufficient accuracy and resolution in terms of the energy and amplitude of free vibrations of the structure, the parameters of the second mode of vibrations should be determined, which can provide a significantly larger amount of data on the spread and intensity of damage along the height of the building. From an applied point of view, the following main areas of wide use of dynamic monitoring by the “free vibration” method for residential and public buildings have been identified: for structures under dynamic loads that cause damage and deformation of load-bearing structures; detection of significant weakening of large sections of the “base-foundation” system; assessment of the impact of significant uneven deformations of the foundation on load-bearing structures; in general (regardless of the characteristics of loads and influences), to identify significant areas of structural damage that significantly affect the overall rigidity of the structural system at the level of the lower floors

  • Open Access

    METHODOLOGY FOR VIBRATION MONITORING OF RESIDENTIAL AND PUBLIC BUILDINGS FOR THE PURPOSE OF ASSESSING THEIR TECHNICAL CONDITION

    by V.O. Basanskyi, D.O. Khokhlin, M.O. Bozhynskyi

    A generalization of the existing basic standards allows us to identify three stages of each ite-ration of vibration monitoring: preparation; measurement; processing and analysis of results with the preparation of a report or other documentation. The components of vibration monitoring using the “free vibration” method for residential and public buildings, considering their specific features, are conside-red. At the same time, the nuances of the first test (monitoring iteration) for a structure, which is the basis for all subsequent ones, are highlighted. It is determined that the main objective of the first stage (preparation) is to create or correct a dynamic model of the building under study and obtain the results of its modal analysis, considering the effect of low intensity microseismic vibrations and determining or correcting the test parameters. The measurements themselves should provide experimental data (actual dynamic characteristics of the building), which will be the basis for further analysis, correction of the dynamic model, and assessment of the technical condition and its dynamics. It is noted that after pro-cessing and analyzing the results of calculations and measurements, it may be necessary to carry out additional clarifying work (investigation or measurements) to obtain additional data and identify possible causes of significant differences in the results of calculations and measurements. The features of dynamic tests of residential and public buildings are highlighted. A brief example of an iteration of vibration monitoring carried out with the participation of the authors for a masonry residential building that was impacted during operation by significant uneven deformations of the basement, primarily associated with new building work nearby, is provided. The data obtained confirmed the presence of sig-nificant damage to the wall structures in the longitudinal direction of the building and the absence of significant weakening of the structures in the transverse direction.

  • Open Access

    Application of residential and public building dynamic characteristic assessment for diagnostics and monitoring of their technical condition

    by Denis Khokhlin, Kostiantyn Militskyi

    A significant number of studies of dynamic characteristics for different types of buildings and their structures in different states have been reviewed. It is noted that the allocation of specific generally applicable values of the oscillation periods (frequencies), which would allow to unambiguously characterizing the state of a structural system of a certain type, is problematic, because the dynamic characteristics depend on too many factors. At the same time, the use of averaged results of a sufficiently large group of different formulas of oscillation period experimental dependences on the main parameters of the structure can provide a fairly accurate value of the building oscillation expected period. It is also important to assess the impact of possible changes in the mass of the structure. It was determined that for residential and public buildings, the impact of a possible change in mass during operation on the frequency of natural oscillations can be estimated at approximately 5%. In the case of measuring the basic (starting) natural oscillation frequency of a completed but not commissioned building, a correction factor of 0.95 should be applied for comparison with subsequent measurements already during operation. It is noted that measurements of horizontal vibration characteristics are indicative and sensitive, first of all, to the state of vertical load-bearing structures, the rigidity of which most affects the period of such vibrations. Measurements of the characteristics of natural vibrations in horizontal directions will be most effective for assessing changes in the state of structures with a rigid structural system and frame structure without vertical ties, as well as the parameters of vertical vibrations of large-span floor and roof structures. According to the studies considered, the reduction in the vibration frequency of rigid stone (as a rule) residential and public buildings, significantly damaged by deformations of the foundation or earthquake (including up to an emergency state) was approximately 0.57…0.89, depending, first of all, on the building height and the damage degree. Based on experimental data, tables of approximate values of permissible reduction coefficients of the initial (relative to the beginning of operation) natural vibration frequency of public and residential buildings with a rigid structural system for technical condition categories and for similar buildings with a reinforced concrete flexible structural system are proposed. Further measures for the operation of the building are proposed based on the assessment of the technical condition category based on the results of measuring the building natural vibration frequencies. The development of methods for assessing the dynamic characteristics of buildings for diagnosing the technical condition of structures damaged by off-design influences, including the improvement of organizational and methodological tools for inspection with the aim of increasing the efficiency of recovering damaged objects, is proposed and considered.

  • Open Access

    BUILDING STRUCTURES UNDER SEISMIC LOADS AND SIGNIFICANT UNEVEN BASE DEFORMATIONS

    by V.O. Basanskyi, D.O. Khokhlin, M.O. Bozhynskyi

    The article summarizes the results of research on the study of the specifics on the sequential combined effects of significant differential foundation settlements of various origins and seismic loads on reinforced concrete and masonry buildings, as well as on the development of corresponding analyti-cal methods and structural protection systems. The main results of the conducted studies include: a pro-posed methodology for determining the foundation stiffness amplification coefficient for dynamic cal-culations; identification of specific aspects of accounting for the foundation behavior in dynamic ana-lyses of masonry and other rigid buildings without constructing a finite-element soil model; development of recommendations for dynamic analysis to reproduce the experimentally measured dynamic charac-teristics of buildings under microseismic excitations; determination of the main effects of substantial differential foundation settlements on the natural vibration periods, stress–strain state, and seismic resistance of structural systems; advancement of static nonlinear analysis for seismic effects using the load-bearing capacity spectrum (LCS) method; and a methodology for assessing structural systems under the sequential action of DDFS and seismic loads based on nonlinear analysis by the LCS method. Furthermore, a general protection system for both new and existing buildings under complex engineering and geological conditions has been developed. It has been established that further improvement is required for efficient time-integration computatio-nal methods capable of modeling building structures and their soil foundations as a detailed nonlinear finite-element (FE) array. Such methods should simultaneously account for the nonlinear behavior of the soil mass, through which seismic waves propagate, and the nonlinear response of the structural system, while also ensuring a justified simplification of these calculations.

  • Open Access

    World experience of green building – opportunities and threats for ukrainian developers

    by Volodymyr Skakun, D. Khokhlin

    The article is devoted to the study of the world experience in the development of the Green Building concept and its impact on the transformation of the Ukrainian development market. In the current conditions of global climate challenges and the strengthening of international environmental standards, sustainable development of construction is becoming one of the key factors in the competitiveness of development companies. Analysis of international practical certifications, such as LEED, BREEAM, DGNB and HQE, allowed to develop basic principles of ecological design, focused on energy efficiency, reducing the carbon footprint, rational use of resources and creating a comfortable environment for users. The study showed that in Ukraine these systems are only progressing and are integrated, but they demonstrate significant potential for attracting foreign investment and integration into the European economic space. The conducted SWOT analysis allows to identify key opportunities for the implementation of Green Building: the development of public-private partnerships, the formation of a domestic market for ecological materials, access to "green" financing and increasing the market value of certified objects. At the same time, a number of threats and barriers have been identified, including the high cost of certification and construction, an insufficient number of trained specialists, problems of harmonizing national standards with international requirements, as well as the risks of superficial application of the concept (“greenwashing”). The article proves that the strategic development of Ukrainian development companies requires a comprehensive approach, which includes the adaptation of international methods to local conditions, the creation of financial support mechanisms and the formation of innovative materials. The application of global experience in Green Building will contribute to increasing the competitiveness of Ukraine at the international level, while reducing environmental and social risks.