Lifeng Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lifeng Wang has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
Jialong Shen
Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering University of Science and Technology of China Hefei Anhui China
6 shared publications- Xianhong Rui
Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering University of Science and Technology of China Hefei Anhui China
6 shared publications - Yan Yu
Hefei National Research Center for Physical Sciences at the Microscale Department of Materials Science and Engineering University of Science and Technology of China Hefei Anhui China
6 shared publications - Hai Yang
Hefei National Research Center for Physical Sciences at the Microscale Department of Materials Science and Engineering University of Science and Technology of China Hefei Anhui China
4 shared publications - Hanyu Huo
Hefei National Research Center for Physical Sciences at the Microscale Department of Materials Science and Engineering University of Science and Technology of China Hefei Anhui China
4 shared publications Junpeng Sun
Hefei National Research Center for Physical Sciences at the Microscale, Department of Materials Science and Engineering University of Science and Technology of China Hefei Anhui China
4 shared publications
Latest Publications
- 2 November 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (45) , 15518-15527
M–N3 Configuration Single-Atom Catalysts for High-Performance Na–S Batteries: Insights from DFT and Data-Assisted Analysis
The sluggish redox kinetics of polysulfide conversion remain a major bottleneck in sodium–sulfur (Na–S) batteries. Single-atom catalysts anchored on boron nitride substrates (M–N3@BN) offer promising routes to accelerate polysulfide conversion due to their high atomic efficiency and tunable electronic structures. However, the rational identification of highly active metal centers remains challenging due to the complex relationship between intermediate adsorption and catalytic activity. Herein, we develop a DFT-guided data-assisted strategy to systematically screen and design M–N3@BN single-atom catalysts for efficient sulfur conversion. By analyzing the adsorption characteristics of Na2Sn intermediates and the corresponding energy evolution during multistep sulfur conversion, potential catalytic candidates are identified and further evaluated through first-principles calculations. This systematic analysis reveals the critical electronic factors governing catalytic activity and provides insights into the regulation of intermediate adsorption and reaction kinetics. Among the investigated candidates, Fe–N3@BN and Zn–N3@BN are revealed as highly active catalysts, exhibiting reduced Na2S2 → Na2S conversion barriers of 0.48 and 0.24 eV, respectively. Electronic structure analyses indicate that the M–N3 active center, with optimized intermediate binding and strong d–p orbital hybridization near the Fermi level, enables superior catalytic kinetics. This work reveals the electronic principles governing polysulfide conversion and provides guidance for the rational design of single-atom catalysts for Na–S batteries.
- 2 November 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (45) , 15518-15527
M–N3 Configuration Single-Atom Catalysts for High-Performance Na–S Batteries: Insights from DFT and Data-Assisted Analysis
The sluggish redox kinetics of polysulfide conversion remain a major bottleneck in sodium–sulfur (Na–S) batteries. Single-atom catalysts anchored on boron nitride substrates (M–N3@BN) offer promising routes to accelerate polysulfide conversion due to their high atomic efficiency and tunable electronic structures. However, the rational identification of highly active metal centers remains challenging due to the complex relationship between intermediate adsorption and catalytic activity. Herein, we develop a DFT-guided data-assisted strategy to systematically screen and design M–N3@BN single-atom catalysts for efficient sulfur conversion. By analyzing the adsorption characteristics of Na2Sn intermediates and the corresponding energy evolution during multistep sulfur conversion, potential catalytic candidates are identified and further evaluated through first-principles calculations. This systematic analysis reveals the critical electronic factors governing catalytic activity and provides insights into the regulation of intermediate adsorption and reaction kinetics. Among the investigated candidates, Fe–N3@BN and Zn–N3@BN are revealed as highly active catalysts, exhibiting reduced Na2S2 → Na2S conversion barriers of 0.48 and 0.24 eV, respectively. Electronic structure analyses indicate that the M–N3 active center, with optimized intermediate binding and strong d–p orbital hybridization near the Fermi level, enables superior catalytic kinetics. This work reveals the electronic principles governing polysulfide conversion and provides guidance for the rational design of single-atom catalysts for Na–S batteries.
- 14 October 2026
- Published by Wiley in Angewandte Chemie
Rotation‐Coupled Guest Anions Stabilize Polymer Solid‐State Sodium‐Metal Batteries
Polymer solid‐state sodium‐metal batteries are constrained by sluggish Na + migration and unstable sodium–metal interfaces, both of which are closely associated with poorly regulated solvation chemistry. Here we report a rotation‐coupled guest‐anion strategy in a poly(vinylidene fluoride‐co‐hexafluoropropylene)‐based solid‐state electrolyte (PHSE) using Mg(OTf) 2 . Mg 2+ preferentially coordinates DMF and TFSI − , weakening Na + –TFSI − association and limiting solvent‐derived reactions at the sodium metal anode. OTf − enters the Na + solvation shell as a mobile guest anion. Its C─S rotational axis and equivalent oxygen coordination sites allow conformational rotation to synchronize with Na + hopping along polymer chains. This anchor–rotator chemistry reorganizes Na + coordination, lowers the migration barrier, and promotes an inorganic‐rich, Mg─O‐containing interphase. The optimized electrolyte enables Na 3 V 2 (PO 4 ) 3 ||Na cells to retain 94.2% capacity after 1100 cycles at 2C and supports a 94 mAh pouch cell with stable cycling. It also enables high‐voltage Na 3 V 2 (PO 4 ) 2 O 2 F||Na cells to retain 93.6% capacity after 1000 cycles at 0.5C over 2.5–4.2 V. Comparative evaluation across a total of 20 polymer electrolyte systems with varied polymer matrices and anion structures identifies anion symmetry, rotational periodicity, and finite rotational barriers as molecular criteria for designing stable polymer solid‐state sodium‐metal batteries.
- 14 October 2026
- Published by Wiley in Angewandte Chemie
Rotation‐Coupled Guest Anions Stabilize Polymer Solid‐State Sodium‐Metal Batteries
Polymer solid‐state sodium‐metal batteries are constrained by sluggish Na + migration and unstable sodium–metal interfaces, both of which are closely associated with poorly regulated solvation chemistry. Here we report a rotation‐coupled guest‐anion strategy in a poly(vinylidene fluoride‐co‐hexafluoropropylene)‐based solid‐state electrolyte (PHSE) using Mg(OTf) 2 . Mg 2+ preferentially coordinates DMF and TFSI − , weakening Na + –TFSI − association and limiting solvent‐derived reactions at the sodium metal anode. OTf − enters the Na + solvation shell as a mobile guest anion. Its C─S rotational axis and equivalent oxygen coordination sites allow conformational rotation to synchronize with Na + hopping along polymer chains. This anchor–rotator chemistry reorganizes Na + coordination, lowers the migration barrier, and promotes an inorganic‐rich, Mg─O‐containing interphase. The optimized electrolyte enables Na 3 V 2 (PO 4 ) 3 ||Na cells to retain 94.2% capacity after 1100 cycles at 2C and supports a 94 mAh pouch cell with stable cycling. It also enables high‐voltage Na 3 V 2 (PO 4 ) 2 O 2 F||Na cells to retain 93.6% capacity after 1000 cycles at 0.5C over 2.5–4.2 V. Comparative evaluation across a total of 20 polymer electrolyte systems with varied polymer matrices and anion structures identifies anion symmetry, rotational periodicity, and finite rotational barriers as molecular criteria for designing stable polymer solid‐state sodium‐metal batteries.
- 14 October 2026
- Published by Wiley in Angewandte Chemie International Edition
- p. e9801142
Rotation‐Coupled Guest Anions Stabilize Polymer Solid‐State Sodium‐Metal Batteries
Polymer solid‐state sodium‐metal batteries are constrained by sluggish Na + migration and unstable sodium–metal interfaces, both of which are closely associated with poorly regulated solvation chemistry. Here we report a rotation‐coupled guest‐anion strategy in a poly(vinylidene fluoride‐co‐hexafluoropropylene)‐based solid‐state electrolyte (PHSE) using Mg(OTf) 2 . Mg 2+ preferentially coordinates DMF and TFSI − , weakening Na + –TFSI − association and limiting solvent‐derived reactions at the sodium metal anode. OTf − enters the Na + solvation shell as a mobile guest anion. Its C─S rotational axis and equivalent oxygen coordination sites allow conformational rotation to synchronize with Na + hopping along polymer chains. This anchor–rotator chemistry reorganizes Na + coordination, lowers the migration barrier, and promotes an inorganic‐rich, Mg─O‐containing interphase. The optimized electrolyte enables Na 3 V 2 (PO 4 ) 3 ||Na cells to retain 94.2% capacity after 1100 cycles at 2C and supports a 94 mAh pouch cell with stable cycling. It also enables high‐voltage Na 3 V 2 (PO 4 ) 2 O 2 F||Na cells to retain 93.6% capacity after 1000 cycles at 0.5C over 2.5–4.2 V. Comparative evaluation across a total of 20 polymer electrolyte systems with varied polymer matrices and anion structures identifies anion symmetry, rotational periodicity, and finite rotational barriers as molecular criteria for designing stable polymer solid‐state sodium‐metal batteries.
- 14 October 2026
- Published by Wiley in Angewandte Chemie International Edition
- p. e9801142
Rotation‐Coupled Guest Anions Stabilize Polymer Solid‐State Sodium‐Metal Batteries
Polymer solid‐state sodium‐metal batteries are constrained by sluggish Na + migration and unstable sodium–metal interfaces, both of which are closely associated with poorly regulated solvation chemistry. Here we report a rotation‐coupled guest‐anion strategy in a poly(vinylidene fluoride‐co‐hexafluoropropylene)‐based solid‐state electrolyte (PHSE) using Mg(OTf) 2 . Mg 2+ preferentially coordinates DMF and TFSI − , weakening Na + –TFSI − association and limiting solvent‐derived reactions at the sodium metal anode. OTf − enters the Na + solvation shell as a mobile guest anion. Its C─S rotational axis and equivalent oxygen coordination sites allow conformational rotation to synchronize with Na + hopping along polymer chains. This anchor–rotator chemistry reorganizes Na + coordination, lowers the migration barrier, and promotes an inorganic‐rich, Mg─O‐containing interphase. The optimized electrolyte enables Na 3 V 2 (PO 4 ) 3 ||Na cells to retain 94.2% capacity after 1100 cycles at 2C and supports a 94 mAh pouch cell with stable cycling. It also enables high‐voltage Na 3 V 2 (PO 4 ) 2 O 2 F||Na cells to retain 93.6% capacity after 1000 cycles at 0.5C over 2.5–4.2 V. Comparative evaluation across a total of 20 polymer electrolyte systems with varied polymer matrices and anion structures identifies anion symmetry, rotational periodicity, and finite rotational barriers as molecular criteria for designing stable polymer solid‐state sodium‐metal batteries.
- 20 May 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (29) , e6338402
Surface Gradient Doping Enables High‐Capacity and Long‐Life Manganese‐Based Prussian Blue Cathodes for Sodium‐Ion Batteries
Manganese‐based Prussian blue analogues (MnPBAs) are attractive cathodes for sodium‐ion batteries (SIBs) due to their high operating voltage, low cost, and sustainability. However, their practical deployment is limited by rapid capacity decay caused by Jahn–Teller distortion and phase‐transition‐induced lattice strain, which trigger Mn dissolution and structural collapse during cycling. Herein, we introduce a surface Cu concentration‐gradient‐doped MnPBA (Cu@MnPBA) synthesized via a two‐step coprecipitation strategy to stabilize the MnPBA framework while preserving high capacity. A ∼200 nm Cu‐gradient surface layer effectively suppresses Jahn–Teller distortion, reduces lattice strain, and inhibits Mn dissolution, while an outer ∼10 nm Cu‐rich amorphous layer enhances Na + surface diffusion and suppresses interfacial side reactions. Unlike conventional coating strategies, the gradient‐doping architecture eliminates interfacial mismatch, ensuring robust structural integrity during prolonged cycling. As a result, Cu@MnPBA delivers a high specific capacity of 143.9 mAh g −1 and retains 78% of its capacity after 500 cycles at 100 mA g −1 . When paired with a hard carbon anode in a pouch cell configuration, the system maintains 75% capacity after 3000 cycles, demonstrating exceptional durability under practical operating conditions. This work establishes gradient surface doping as an effective design principle for realizing high‐capacity, long‐life Prussian blue cathodes for SIBs.
- 20 May 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (29) , e6338402
Surface Gradient Doping Enables High‐Capacity and Long‐Life Manganese‐Based Prussian Blue Cathodes for Sodium‐Ion Batteries
Manganese‐based Prussian blue analogues (MnPBAs) are attractive cathodes for sodium‐ion batteries (SIBs) due to their high operating voltage, low cost, and sustainability. However, their practical deployment is limited by rapid capacity decay caused by Jahn–Teller distortion and phase‐transition‐induced lattice strain, which trigger Mn dissolution and structural collapse during cycling. Herein, we introduce a surface Cu concentration‐gradient‐doped MnPBA (Cu@MnPBA) synthesized via a two‐step coprecipitation strategy to stabilize the MnPBA framework while preserving high capacity. A ∼200 nm Cu‐gradient surface layer effectively suppresses Jahn–Teller distortion, reduces lattice strain, and inhibits Mn dissolution, while an outer ∼10 nm Cu‐rich amorphous layer enhances Na + surface diffusion and suppresses interfacial side reactions. Unlike conventional coating strategies, the gradient‐doping architecture eliminates interfacial mismatch, ensuring robust structural integrity during prolonged cycling. As a result, Cu@MnPBA delivers a high specific capacity of 143.9 mAh g −1 and retains 78% of its capacity after 500 cycles at 100 mA g −1 . When paired with a hard carbon anode in a pouch cell configuration, the system maintains 75% capacity after 3000 cycles, demonstrating exceptional durability under practical operating conditions. This work establishes gradient surface doping as an effective design principle for realizing high‐capacity, long‐life Prussian blue cathodes for SIBs.
- 20 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (29)
Surface Gradient Doping Enables High‐Capacity and Long‐Life Manganese‐Based Prussian Blue Cathodes for Sodium‐Ion Batteries
Manganese‐based Prussian blue analogues (MnPBAs) are attractive cathodes for sodium‐ion batteries (SIBs) due to their high operating voltage, low cost, and sustainability. However, their practical deployment is limited by rapid capacity decay caused by Jahn–Teller distortion and phase‐transition‐induced lattice strain, which trigger Mn dissolution and structural collapse during cycling. Herein, we introduce a surface Cu concentration‐gradient‐doped MnPBA (Cu@MnPBA) synthesized via a two‐step coprecipitation strategy to stabilize the MnPBA framework while preserving high capacity. A ∼200 nm Cu‐gradient surface layer effectively suppresses Jahn–Teller distortion, reduces lattice strain, and inhibits Mn dissolution, while an outer ∼10 nm Cu‐rich amorphous layer enhances Na + surface diffusion and suppresses interfacial side reactions. Unlike conventional coating strategies, the gradient‐doping architecture eliminates interfacial mismatch, ensuring robust structural integrity during prolonged cycling. As a result, Cu@MnPBA delivers a high specific capacity of 143.9 mAh g −1 and retains 78% of its capacity after 500 cycles at 100 mA g −1 . When paired with a hard carbon anode in a pouch cell configuration, the system maintains 75% capacity after 3000 cycles, demonstrating exceptional durability under practical operating conditions. This work establishes gradient surface doping as an effective design principle for realizing high‐capacity, long‐life Prussian blue cathodes for SIBs.
- 20 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (29)
Surface Gradient Doping Enables High‐Capacity and Long‐Life Manganese‐Based Prussian Blue Cathodes for Sodium‐Ion Batteries
Manganese‐based Prussian blue analogues (MnPBAs) are attractive cathodes for sodium‐ion batteries (SIBs) due to their high operating voltage, low cost, and sustainability. However, their practical deployment is limited by rapid capacity decay caused by Jahn–Teller distortion and phase‐transition‐induced lattice strain, which trigger Mn dissolution and structural collapse during cycling. Herein, we introduce a surface Cu concentration‐gradient‐doped MnPBA (Cu@MnPBA) synthesized via a two‐step coprecipitation strategy to stabilize the MnPBA framework while preserving high capacity. A ∼200 nm Cu‐gradient surface layer effectively suppresses Jahn–Teller distortion, reduces lattice strain, and inhibits Mn dissolution, while an outer ∼10 nm Cu‐rich amorphous layer enhances Na + surface diffusion and suppresses interfacial side reactions. Unlike conventional coating strategies, the gradient‐doping architecture eliminates interfacial mismatch, ensuring robust structural integrity during prolonged cycling. As a result, Cu@MnPBA delivers a high specific capacity of 143.9 mAh g −1 and retains 78% of its capacity after 500 cycles at 100 mA g −1 . When paired with a hard carbon anode in a pouch cell configuration, the system maintains 75% capacity after 3000 cycles, demonstrating exceptional durability under practical operating conditions. This work establishes gradient surface doping as an effective design principle for realizing high‐capacity, long‐life Prussian blue cathodes for SIBs.
- 2 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (20)
Synergistic Orbital Hybridization and Steric Shielding for Stabilizing High‐Voltage Interfaces in 4.3 V Sodium‐Ion Batteries
High‐voltage polyanionic cathodes, such as Na 3 V 3 (PO 4 ) 2 F 3 (NVPF), are pivotal for high‐energy‐density sodium‐ion batteries but are fundamentally constrained by severe parasitic reactions at the desodiated interface. These reactions driven by unsaturated vanadium sites and solvent enrichment cause rapid capacity fade. Herein, we propose a molecular interfacial engineering strategy using rationally designed organic phosphate additives. These additives stabilize vanadium via π‐d orbital hybridization and regulate the interfacial microenvironment through three‐dimensional steric shielding, passivating reactive species, and suppressing solvent enrichment. Guided by a descriptor‐driven screening process (Mulliken charge, van der Waals volume, O 2p band center, Δ E (O 2p band center‐V 3d band center)), tris(trimethylsilyl) phosphate (TMSP) is identified as the optimal electrolyte modifier. The TMSP‐tailored electrolyte promotes in situ formation of a thin, compact, and inorganic‐rich interphase on both the NVPF cathode and the hard carbon (HC) anode, effectively mitigating vanadium species dissolution and parasitic side reactions. Consequently, the 4.3 V NVPF||HC pouch cell can deliver exceptional cycling stability, retaining 85.24% of its capacity after 1500 cycles (416.7 days) at 0.3 C, and achieve a high energy density of 161 Wh kg − 1 . This work establishes a design principle that couples orbital hybridization with steric shielding to construct ultra‐stable interfaces in high‐voltage battery systems.
- 2 April 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (20)
Synergistic Orbital Hybridization and Steric Shielding for Stabilizing High‐Voltage Interfaces in 4.3 V Sodium‐Ion Batteries
High‐voltage polyanionic cathodes, such as Na 3 V 3 (PO 4 ) 2 F 3 (NVPF), are pivotal for high‐energy‐density sodium‐ion batteries but are fundamentally constrained by severe parasitic reactions at the desodiated interface. These reactions driven by unsaturated vanadium sites and solvent enrichment cause rapid capacity fade. Herein, we propose a molecular interfacial engineering strategy using rationally designed organic phosphate additives. These additives stabilize vanadium via π‐d orbital hybridization and regulate the interfacial microenvironment through three‐dimensional steric shielding, passivating reactive species, and suppressing solvent enrichment. Guided by a descriptor‐driven screening process (Mulliken charge, van der Waals volume, O 2p band center, Δ E (O 2p band center‐V 3d band center)), tris(trimethylsilyl) phosphate (TMSP) is identified as the optimal electrolyte modifier. The TMSP‐tailored electrolyte promotes in situ formation of a thin, compact, and inorganic‐rich interphase on both the NVPF cathode and the hard carbon (HC) anode, effectively mitigating vanadium species dissolution and parasitic side reactions. Consequently, the 4.3 V NVPF||HC pouch cell can deliver exceptional cycling stability, retaining 85.24% of its capacity after 1500 cycles (416.7 days) at 0.3 C, and achieve a high energy density of 161 Wh kg − 1 . This work establishes a design principle that couples orbital hybridization with steric shielding to construct ultra‐stable interfaces in high‐voltage battery systems.
- 2 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (20) , e6618249
Synergistic Orbital Hybridization and Steric Shielding for Stabilizing High‐Voltage Interfaces in 4.3 V Sodium‐Ion Batteries
High‐voltage polyanionic cathodes, such as Na 3 V 3 (PO 4 ) 2 F 3 (NVPF), are pivotal for high‐energy‐density sodium‐ion batteries but are fundamentally constrained by severe parasitic reactions at the desodiated interface. These reactions driven by unsaturated vanadium sites and solvent enrichment cause rapid capacity fade. Herein, we propose a molecular interfacial engineering strategy using rationally designed organic phosphate additives. These additives stabilize vanadium via π‐d orbital hybridization and regulate the interfacial microenvironment through three‐dimensional steric shielding, passivating reactive species, and suppressing solvent enrichment. Guided by a descriptor‐driven screening process (Mulliken charge, van der Waals volume, O 2p band center, Δ E (O 2p band center‐V 3d band center)), tris(trimethylsilyl) phosphate (TMSP) is identified as the optimal electrolyte modifier. The TMSP‐tailored electrolyte promotes in situ formation of a thin, compact, and inorganic‐rich interphase on both the NVPF cathode and the hard carbon (HC) anode, effectively mitigating vanadium species dissolution and parasitic side reactions. Consequently, the 4.3 V NVPF||HC pouch cell can deliver exceptional cycling stability, retaining 85.24% of its capacity after 1500 cycles (416.7 days) at 0.3 C, and achieve a high energy density of 161 Wh kg − 1 . This work establishes a design principle that couples orbital hybridization with steric shielding to construct ultra‐stable interfaces in high‐voltage battery systems.
- 2 April 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (20) , e6618249
Synergistic Orbital Hybridization and Steric Shielding for Stabilizing High‐Voltage Interfaces in 4.3 V Sodium‐Ion Batteries
High‐voltage polyanionic cathodes, such as Na 3 V 3 (PO 4 ) 2 F 3 (NVPF), are pivotal for high‐energy‐density sodium‐ion batteries but are fundamentally constrained by severe parasitic reactions at the desodiated interface. These reactions driven by unsaturated vanadium sites and solvent enrichment cause rapid capacity fade. Herein, we propose a molecular interfacial engineering strategy using rationally designed organic phosphate additives. These additives stabilize vanadium via π‐d orbital hybridization and regulate the interfacial microenvironment through three‐dimensional steric shielding, passivating reactive species, and suppressing solvent enrichment. Guided by a descriptor‐driven screening process (Mulliken charge, van der Waals volume, O 2p band center, Δ E (O 2p band center‐V 3d band center)), tris(trimethylsilyl) phosphate (TMSP) is identified as the optimal electrolyte modifier. The TMSP‐tailored electrolyte promotes in situ formation of a thin, compact, and inorganic‐rich interphase on both the NVPF cathode and the hard carbon (HC) anode, effectively mitigating vanadium species dissolution and parasitic side reactions. Consequently, the 4.3 V NVPF||HC pouch cell can deliver exceptional cycling stability, retaining 85.24% of its capacity after 1500 cycles (416.7 days) at 0.3 C, and achieve a high energy density of 161 Wh kg − 1 . This work establishes a design principle that couples orbital hybridization with steric shielding to construct ultra‐stable interfaces in high‐voltage battery systems.
- 20 January 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 668
Dual pentagonal defects in metal-free carbon enable synergistic catalysis for sodium–sulfur batteries
- 20 January 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 668
Dual pentagonal defects in metal-free carbon enable synergistic catalysis for sodium–sulfur batteries
- 9 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (2) , 3927-3935
Aliovalent Mo-Doping Induced Charge-Compensation Defect Chemistry and Enhanced K-Ion Storage in SnSe@CNF
Potassium-ion batteries (PIBs) have attracted growing attention for large-scale energy storage, owing to their potentially low cost. Metal chalcogenides are considered promising anode materials for PIBs on the basis of their high capacity. However, SnSe, as a representative chalcogenide, suffers from poor conductivity and structural instability, which severely limit its rate performance and long-term stability. Herein, we propose a valence-engineering strategy by introducing aliovalent Mo dopants into carbon nanofiber-encapsulated SnSe (denoted as Mo0.1-SnSe@CNF). Structural and compositional analyses confirm that Mo exists in mixed valence states of +4 and +6, substituting for Sn2+ and inducing a charge-compensation-related nonstoichiometry consistent with cation-vacancy formation. The CNF confinement ensures uniform dispersion of nanoparticles and robust structural integrity. Benefiting from the synergistic effects of valence modulation and carbon confinement, the Mo0.1-SnSe@CNF electrode demonstrates markedly enhanced rate performance, delivering ∼140 mAh g-1 at 3 A g-1, along with excellent cycling stability over prolonged operation. Density functional theory (DFT) calculations reveal that Mo doping narrows the bandgap and increases the density of states near the Fermi level, promoting charge transport. Ex situ TEM and XPS analyses verify that the Mo0.1-SnSe@CNF electrode follows a conversion-alloying reaction mechanism during K storage. This study provides an effective design principle for constructing high-rate and durable chalcogenide anodes for next-generation PIBs.
- 9 January 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (2) , 3927-3935
Aliovalent Mo-Doping Induced Charge-Compensation Defect Chemistry and Enhanced K-Ion Storage in SnSe@CNF
Potassium-ion batteries (PIBs) have attracted growing attention for large-scale energy storage, owing to their potentially low cost. Metal chalcogenides are considered promising anode materials for PIBs on the basis of their high capacity. However, SnSe, as a representative chalcogenide, suffers from poor conductivity and structural instability, which severely limit its rate performance and long-term stability. Herein, we propose a valence-engineering strategy by introducing aliovalent Mo dopants into carbon nanofiber-encapsulated SnSe (denoted as Mo0.1-SnSe@CNF). Structural and compositional analyses confirm that Mo exists in mixed valence states of +4 and +6, substituting for Sn2+ and inducing a charge-compensation-related nonstoichiometry consistent with cation-vacancy formation. The CNF confinement ensures uniform dispersion of nanoparticles and robust structural integrity. Benefiting from the synergistic effects of valence modulation and carbon confinement, the Mo0.1-SnSe@CNF electrode demonstrates markedly enhanced rate performance, delivering ∼140 mAh g-1 at 3 A g-1, along with excellent cycling stability over prolonged operation. Density functional theory (DFT) calculations reveal that Mo doping narrows the bandgap and increases the density of states near the Fermi level, promoting charge transport. Ex situ TEM and XPS analyses verify that the Mo0.1-SnSe@CNF electrode follows a conversion-alloying reaction mechanism during K storage. This study provides an effective design principle for constructing high-rate and durable chalcogenide anodes for next-generation PIBs.
- 5 August 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 655
CoP as a bidirectional Catalyst: Unlocking reaction dynamics in Sodium–Sulfur batteries
- 5 August 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 655
CoP as a bidirectional Catalyst: Unlocking reaction dynamics in Sodium–Sulfur batteries