XLXiong Luo

Xiong Luo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiong Luo has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Microstructure Evolution and Toughening Mechanisms in the Nugget Zone of Friction-Stir-Welded X80 Pipeline Steel

    by Miaoye Han, Min Yang, Yinhui Rao, Xiong Luo, Ruihai Duan, Sheng Guo, Ying Dong, Shujin Chen

    Coarse grains and blocky M-A constituents are often generated in the heat-affected zone (HAZ) of fusion welded pipeline steel joints owing to high heat input, causing a significant deterioration of toughness. This study demonstrated the effect of heat input in friction stir welding (FSW) on the microstructure and toughness of the nugget zone (NZ), elucidating the microstructure evolution and toughening mechanism. The results revealed a marked reduction in effective grain size within the NZ at low heat input (LHI) and a significant increase in the ratio of the refined M-A constituent. Furthermore, the decreased heat input leads to weak texture components (D1, D2, and F) accompanied by a decrease in the kernel average misorientation (KAM) value. This microstructural optimization clearly enhances toughness, and an excellent toughness value of 200 J, representing 95.3% of the basal metal (BM), was achieved in the NZ at LHI. The primary reason for this improvement is the refinement of effective grains and M-A constituents resulting from reduced heat input. During crack propagation, the high proportion of effective grain boundaries and fine M-A constituents acts as a barrier, arresting and deflecting cracks and thereby enhancing toughness.


  • Open Access

    Study on the Influence of Heat Input on Microstructure and Properties of Q420C Steel Welded Joints

    by Hanxin Long, Guoping Wang, Pingxin Wang, Jinjun Ma, Xiong Luo, Huan He

    The occurrence of the welding heat-affected zone in Q420C steel may lead to a reduction in the toughness of the welded joint and disruption of high strength-toughness combination of Q420C. This study investigates the microstructure and mechanical properties of Q420C steel welded joints under three heat in-puts of 25 kJ/cm, 100 kJ/cm, 200 kJ/cm, and 300 kJ/cm, with high-strength matching adopted for the welded joints, Charpy impact tests at 0 °C, −20 °C, and −40 °C were conducted on the weld metal, fusion line(FL), and heat-affected zone (HAZ). The weld metal maintains high impact toughness across all tested temperatures. However, increasing the heat input leads to coarsening of the microstructure in the overheated zone of the HAZ, accompanied by the formation of ferrite. At a heat input of 300 kJ/cm, significant amounts of coarse intergranular ferrite and intragranular blocky ferrite develop in the overheated zone. These microstructural changes result in a marked reduction in the impact toughness of both the fusion zone and HAZ, and the fracture mode shifts from ductile to cleavage fracture. To ensure adequate impact toughness of Q420C welded joints, the welding heat input should be kept below 200 kJ/cm.