Study on the Influence of Heat Input on Microstructure and Properties of Q420C Steel Welded Joints
Open Access
Abstract
The occurrence of the welding heat-affected zone in Q420C steel may lead to a reduction in the toughness of the welded joint and disruption of high strength-toughness combination of Q420C. This study investigates the microstructure and mechanical properties of Q420C steel welded joints under three heat in-puts of 25 kJ/cm, 100 kJ/cm, 200 kJ/cm, and 300 kJ/cm, with high-strength matching adopted for the welded joints, Charpy impact tests at 0 °C, −20 °C, and −40 °C were conducted on the weld metal, fusion line(FL), and heat-affected zone (HAZ). The weld metal maintains high impact toughness across all tested temperatures. However, increasing the heat input leads to coarsening of the microstructure in the overheated zone of the HAZ, accompanied by the formation of ferrite. At a heat input of 300 kJ/cm, significant amounts of coarse intergranular ferrite and intragranular blocky ferrite develop in the overheated zone. These microstructural changes result in a marked reduction in the impact toughness of both the fusion zone and HAZ, and the fracture mode shifts from ductile to cleavage fracture. To ensure adequate impact toughness of Q420C welded joints, the welding heat input should be kept below 200 kJ/cm.Keywords
This publication has 14 references indexed in Scilit:
- Meta-structure of amorphous-inspired 65.1Co28.2Cr5.3Mo lattices augmented by artificial intelligenceAdvanced Composites and Hybrid Materials, 2024
- Effect of inserting a-C layers on anticorrosion behavior of Ni-NiCr-NiCrAlSi composite coating on copper through magnetron sputtering for marine applicationsThin Solid Films, 2024
- Grain Refinement Mechanism in the CGHAZ of Ultra-High-Strength Structural Steel: A Critical Analysis of the Impacts of Prior Austenite Grain and Cooling RatesJOM, 2024
- Electrochemically assisted laser surface microtexture preparation and tribological properties researchJournal of Manufacturing Processes, 2024
- Experimental investigations into stocky composite columns of concrete-filled circular S690 steel tubes under compressionEngineering Structures, 2024
- Local buckling analysis of axially compressed welded box-section stub columns using Q420–Q960 steelJournal of Constructional Steel Research, 2023
- Effects of Ce-La rare earth microalloying on the microstructure and corrosion characteristics of Q420 high-strength steelInternational Journal of Electrochemical Science, 2023
- Overall buckling behaviour of Q420–Q960 steel welded H-section axial compression membersEngineering Structures, 2021
- Selective compositional range exclusion via directed energy deposition to produce a defect-free Inconel 718/SS 316L functionally graded materialAdditive Manufacturing, 2021
- Fatigue properties of welded Q420 high strength steel at room and low temperaturesConstruction and Building Materials, 2018