LDLorenz Däubler

Lorenz Däubler

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lorenz Däubler has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    PLC Systems: A Direct Integration Strategy for IEC 61850 MMS

    by Arthur Kniphoff da Cruz, Christian Siemers, Lorenz Däubler, Ana Clara Hackenhaar Kellermann, Jaine Mercia Fernandes de Oliveira

    This work proposes a vendor-independent integration method for International Electrotechnical Commission (IEC) 61850 Manufacturing Message Specification (MMS) communication protocol into Programmable Logic Controller (PLC) systems that support an open network communication interface available for the PLC program. IEC 61850 is globally well accepted for electrical substation control, and the protocol MMS is used for integrating the electrical substation bay level into the station level, where the PLC orchestrates the process level of the substation and parallel processes. This method was created because most PLCs lines do not natively support any protocol of IEC 61850, although it often needs to be used for the control of electrical substations. For the development of the prototype presented in this paper, PLCs from the Siemens AG families S7-1500 and S7-410, which support open communication over Transmission Control Protocol/Internet Protocol (TCP/IP) with external systems, were used for validation. Different results regarding network communication and PLC program performance are presented in this paper. The implemented solution presents a meaningful implementation of the MMS application layer into the PLC program and was successfully validated with real industrial, single and redundant PLC systems.

  • Open Access

    IEC 61850 GOOSE: A Systematic Literature Review on the State of the Art and Current Applications

    by Arthur Kniphoff da Cruz, Ana Clara Hackenhaar Kellermann, Ingridy Caroliny da Silva, Jaine Mercia Fernandes de Oliveira, Marcia Elena Jochims Kniphoff da Cruz, Lorenz Däubler

    To develop secure, fast, and interoperable smart substations, it is vital to understand the current situation and potential future directions of the technologies involved. This study presents the evolution and state of the art of the Generic Object Oriented Substation Event (GOOSE) communication protocol, defined by the International Electrotechnical Commission (IEC) 61850 standard. A Systematic Literature Review (SLR) was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) protocol. This included journal articles published from 2004 to 2025 and conference papers from 2020 to 2025, written in English within Engineering. Only studies primarily focusing on GOOSE, citing it at least ten times, and indexed in the Scopus, IEEE Xplore, and Web of Science databases were included. The quantitative analysis used SciMAT software, complemented by a qualitative analysis. Due to the bibliometric and thematic nature of this review, potential biases were considered at the review level rather than by applying a formal study-level risk-of-bias tool. The final analysis comprised 82 journal articles and 84 conference papers. The results offer a comprehensive mapping of GOOSE research evolution, identify nine main challenges and limitations from the last 22 years, and highlight current research directions. The literature reveals methodological heterogeneity, a predominance of simulation-based approaches, and limited large-scale empirical validation.


  • Open Access

    Using Artificial Intelligence to Classify IEDs’ Control Scope from SCL Files

    by Arthur Kniphoff da Cruz, Ana Clara Hackenhaar Kellermann, João Vitor Meinhardt Swarowsky, Ingridy Caroliny da Silva, Marcia Elena Jochims Kniphoff da Cruz, Lorenz Däubler

    IEC 61850 is one of the most accepted standards worldwide for the automation of electrical substations. This standard uses Substation Configuration Language (SCL) for describing the data model and services from electrical substation components, and SCL files are used for the integration of these components throughout the substation. In this context, the integration of bay level Intelligent Electronic Devices (IEDs) into the station level demands a detailed analysis of the IED’s control scope in SCL files and advanced know-how in IEC 61850, increasing the complexity in the engineering process. Hence, this work presents a method to automate the analysis of the control scope of IEDs using SCL files, generating their respective control system object. This is achieved via Machine-Learning (ML) concepts, such as supervised learning and classification algorithms. IEDs used for control and protection of feeder and transformer systems were analyzed, and control system objects were generated for them. The results indicate that the developed method makes it possible to classify the control scope of IEDs using the SCL files from the bay level. This method is a unique development for application in the engineering process of digital substations, reducing the complexity of a critical step towards substation automation.

  • Open Access

    Integration Method for IEC 61850 into Legacy and Modern PLC Systems

    by Arthur Kniphoff da Cruz, Christian Siemers, Lorenz Däubler, Ana Clara Hackenhaar Kellermann

    In the classic energy sector, as well as in the manufacturing and process industries, Programmable Logic Controller (PLC) systems are used for electrical substation control. However, PLCs frequently do not support the communication protocols defined on the standard International Electrotechnical Commission (IEC) 61850. Therefore, this paper presents a vendor-independent method for the integration of Protection and Control (P&C) Intelligent Electronic Devices (IEDs), components of the substation bay level, in PLCs from the substation station level. The method can be used with legacy and modern controllers that offer an open communication interface, where the use of Transmission Control Protocol/Internet Protocol (TCP/IP) is supported. Since many legacy systems offer an open communication interface, this method makes it possible to reuse PLCs, bringing cost efficiency and ecological benefits. The method can be used in a single or redundant way since redundancy is always required in power distribution control. A prototype was developed for the integration over IEC 61850 Manufacturing Message Specification (MMS), and its functional validation is presented in this paper. This solution, besides reducing hardware and software acquisition costs, also contributes to a reduction in electronic waste (E-Waste) and the achievement of Sustainable Development Goals (SDGs).


  • Open Access

    TSN AS A DRIVER FOR INDUSTRY 5.0: A SYSTEMATIC LITERATURE REVIEW

    by Arthur Kniphoff da Cruz, Ingridy Caroliny da Silva, Marcia Elena Jochims Kniphoff da Cruz, Lorenz Däubler

    This Systematic Literature Review (SLR) examines the stages of TSN maturation between 2022 and 2025 in industrial automation. The bibliographic and qualitative methodology, of exploratory and descriptive character, followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) criterion and reconciled the VOSviewer software to map studies of the IEEE 802.1 standards that cover the conservation of real-time communication, precise synchronization and high dexterity of complex systems. The results point to a gradual integration of TSN with growing technologies and identify technical gaps that require future investigation, such as traffic scheduling and dynamic configuration in discordant networks. Furthermore, it proposes future paths for the increase of more lenient, secure and adaptive architectures to support the critical requirements of Industry 5.0, concluding that the evolution of TSN is in a transitory phase, in which research plays a fundamental role to reduce limitations and enhance applications.

  • Open Access

    Novel approaches for the integration of the electrical substation IEC 61850 bay level in modern Industry 4.0 SCADA and Edge Systems based on OPC UA, TSN and MTP Standards

    by Arthur Kniphoff da Cruz, Daniel Lechner, Christian Siemers, Ana Clara Hackenhaar Kellermann, Lorenz Däubler

    Supervisory Control and Data Acquisition (SCADA) and Edge systems are used in different sectors of the factory and process industries. A big part of the use cases is dedicated partially or completely to the control of the energy distribution in plants dedicated to industrial processes or just for the energy sector. The heart of the energy distribution plants is the electrical substation and the International Electrotechnical Commission (IEC) 61850 is the established standard for its communication design, allowing the interoperability between the substation components. Although the standard allows interoperability, the integration and modularization of the bay level components into the station level (SCADA/Edge systems) can be optimized, since there is no modern standard procedure for integrating and easily managing the bay level components into the substation station level, i.e. into different layers and units of reference models for Industry 4.0 (I4.0), like the Process Orchestration Layer (POL). This research presents the effort for the mapping of IEC 61850 into Open Platform Communication Unified Architecture (OPC UA) and makes a review of the OPC UA compendium 10040 that presumes to use the communication OPC UA client-server (CS). As an increment, the efforts for the mapping of Generic Object-Oriented Substation Event (GOOSE) into OPC UA publish-subscribe (PubSub) over Time-Sensitive Networking (TSN) will be presented. To manage bay level components in modern station level systems, this article proposes the mapping of P&C (Protection and Control) Intelligent Electronic Devices (IEDs) into Modular Type Packages (MTP) objects. As example, the modularization of a feeder system will be presented.