Sara MacNally
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sara MacNally has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Amy L. Rigatti
University of Rochester
4 shared publications - Kyle R. P. Kafka
University of Rochester
3 shared publications - Marcela Mireles
University of Rochester
3 shared publications - Stavros G. Demos
University of Rochester
3 shared publications - Alexei A. Kozlov
University of Rochester
2 shared publications - Brittany N. Hoffman
University of Rochester
2 shared publications
Latest Publications
- 6 November 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (23) , 44025
Damage-growth performance in multilayer dielectric mirrors under 351-nm, 1-ns laser pulses: influence of design parameters
Multilayer dielectric (MLD) mirrors are critical for next-generation, large-aperture, high-repetition-rate laser systems, such as inertial fusion energy drivers or directed energy systems. The performance of MLD mirrors must remain unaffected by laser-induced damage over their operational lifetime. This study investigates the material and design parameters that influence the damage-growth performance of fabricated Al 2 O 3 /SiO 2 and HfO 2 /SiO 2 MLD mirrors tested at 351 nm using nanosecond pulses. The study is based on the hypothesis that damage initiation can be considered unavoidable due to coating imperfections or contamination, but may not affect laser operation if damage sites remain stable with successive pulses. Modeling of damage-initiation sites revealed that the 3D electric-field intensity governs damage growth. Results show that high-index material significantly affects the damage-growth threshold. Using a high-index material as the outer layer helps confine damage growth to this layer, preventing catastrophic penetration into inner layers.
- 6 November 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (23) , 44025
Damage-growth performance in multilayer dielectric mirrors under 351-nm, 1-ns laser pulses: influence of design parameters
Multilayer dielectric (MLD) mirrors are critical for next-generation, large-aperture, high-repetition-rate laser systems, such as inertial fusion energy drivers or directed energy systems. The performance of MLD mirrors must remain unaffected by laser-induced damage over their operational lifetime. This study investigates the material and design parameters that influence the damage-growth performance of fabricated Al 2 O 3 /SiO 2 and HfO 2 /SiO 2 MLD mirrors tested at 351 nm using nanosecond pulses. The study is based on the hypothesis that damage initiation can be considered unavoidable due to coating imperfections or contamination, but may not affect laser operation if damage sites remain stable with successive pulses. Modeling of damage-initiation sites revealed that the 3D electric-field intensity governs damage growth. Results show that high-index material significantly affects the damage-growth threshold. Using a high-index material as the outer layer helps confine damage growth to this layer, preventing catastrophic penetration into inner layers.
- 18 September 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (19) , 5349
Parametric study on damage performance of ultrafast-enhanced metal mirror designs
The fundamental limitations and long-term performance of a set of seven broadband mirror designs are explored as a function of their design parameters, aiming to support the development of optics for future 100-PW-class laser systems. The mirror samples are subjected to a variety of testing protocols under both s - and p -polarized 20-fs pulses in the near-infrared and exhibit laser-induced changes including ablation, color change, and contamination. Spatially resolved reflectance measurements are used to quantify the impact of the observed modification types on the functional performance of the optic. Overall, the performance varies significantly and non-monotonically across the design space.
- 18 September 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (19) , 5349
Parametric study on damage performance of ultrafast-enhanced metal mirror designs
The fundamental limitations and long-term performance of a set of seven broadband mirror designs are explored as a function of their design parameters, aiming to support the development of optics for future 100-PW-class laser systems. The mirror samples are subjected to a variety of testing protocols under both s - and p -polarized 20-fs pulses in the near-infrared and exhibit laser-induced changes including ablation, color change, and contamination. Spatially resolved reflectance measurements are used to quantify the impact of the observed modification types on the functional performance of the optic. Overall, the performance varies significantly and non-monotonically across the design space.
- 16 December 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A164-A169
Effect of dimethyl phthalate contamination on all-silica GLAD quarter-wave plate performances
Phthalate molecular contamination, identified in the Laser Mégajoule target chamber, can severely alter porous coatings' performance, such as glancing angle deposited quarter-wave plates (QWP). QWPs could potentially be used inside this chamber to smooth the intensity of the focal spots on the target. In this study, all-silica QWP coatings were contaminated with dimethyl phthalate. Transmission was lowered due to the absorption of phthalates, and a non-uniform retardance was induced, even after a two-month storage period in air following contamination. Infrared measurements confirmed the presence of bonds associated with phthalates within the coatings due to their sorption and only partial desorption.
- 16 December 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A164-A169
Effect of dimethyl phthalate contamination on all-silica GLAD quarter-wave plate performances
Phthalate molecular contamination, identified in the Laser Mégajoule target chamber, can severely alter porous coatings' performance, such as glancing angle deposited quarter-wave plates (QWP). QWPs could potentially be used inside this chamber to smooth the intensity of the focal spots on the target. In this study, all-silica QWP coatings were contaminated with dimethyl phthalate. Transmission was lowered due to the absorption of phthalates, and a non-uniform retardance was induced, even after a two-month storage period in air following contamination. Infrared measurements confirmed the presence of bonds associated with phthalates within the coatings due to their sorption and only partial desorption.
- 12 November 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A99-A104
Defect passivation in nanostructured silica for stable birefringence in polarization optics
Nanostructured materials with anisotropic microstructure exhibit direction-dependent refractive index, known as form birefringence. One of the main advantages of these nanostructured materials is that the ease of fabrication significantly reduces the cost of production. However, their birefringence is affected by humidity as well as time. The hypothesis is that defects, particularly silanols, are responsible. Here we present the use of hexamethyldisilazane (HMDS) vapor as a passivation strategy. Using spectroscopic ellipsometry and Raman scattering, the data show that HMDS successfully passivates silanol groups and promotes O-Si-O bond formation, resulting in improved stability. The results demonstrate a simple method to enhance the reliability of all-silica polarization optics offering potential advancements for high-power laser components.
- 12 November 2025
- Published by Optica Publishing Group in Applied Optics
- Vol. 65 (5) , A99-A104
Defect passivation in nanostructured silica for stable birefringence in polarization optics
Nanostructured materials with anisotropic microstructure exhibit direction-dependent refractive index, known as form birefringence. One of the main advantages of these nanostructured materials is that the ease of fabrication significantly reduces the cost of production. However, their birefringence is affected by humidity as well as time. The hypothesis is that defects, particularly silanols, are responsible. Here we present the use of hexamethyldisilazane (HMDS) vapor as a passivation strategy. Using spectroscopic ellipsometry and Raman scattering, the data show that HMDS successfully passivates silanol groups and promotes O-Si-O bond formation, resulting in improved stability. The results demonstrate a simple method to enhance the reliability of all-silica polarization optics offering potential advancements for high-power laser components.
- 30 July 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (15) , 4838-4841
Laser-induced damage-growth threshold at 351 nm in the nanosecond regime in dielectric coatings employing different high-index materials
The laser-damage performance of HfO2/SiO2 and Al2O3/SiO2 mirrors was investigated at a laser wavelength of 351 nm with nanosecond pulse durations. A method was developed to quantify the laser-induced damage-growth threshold under conditions relevant to high-repetition-rate, large-aperture laser systems. The results suggest that the damage-growth performance cannot be inferred from the corresponding damage-initiation threshold that is commonly used to evaluate the performance of optical materials. A systematic difference was also observed in the performance between these two groups of high-index materials, with the Al2O3/SiO2 mirrors exhibiting about twofold improvement in the damage-growth threshold.
- 30 July 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (15) , 4838-4841
Laser-induced damage-growth threshold at 351 nm in the nanosecond regime in dielectric coatings employing different high-index materials
The laser-damage performance of HfO2/SiO2 and Al2O3/SiO2 mirrors was investigated at a laser wavelength of 351 nm with nanosecond pulse durations. A method was developed to quantify the laser-induced damage-growth threshold under conditions relevant to high-repetition-rate, large-aperture laser systems. The results suggest that the damage-growth performance cannot be inferred from the corresponding damage-initiation threshold that is commonly used to evaluate the performance of optical materials. A systematic difference was also observed in the performance between these two groups of high-index materials, with the Al2O3/SiO2 mirrors exhibiting about twofold improvement in the damage-growth threshold.