Chengpeng Wang
Chengpeng Wang has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Qingfen Ma
College of Mechanical and Electrical Engineering, Hainan University, Haikou 570228, China
4 shared publications Shenghui Wang
The Institute of Seawater Desalination and Multipurpose Utilization, MNR 1 , Tianjin 300192
4 shared publicationsDaiwang Song
2 shared publicationsJiemin Song
2 shared publicationsShuo Wang
2 shared publicationsTamer Nabil
2 shared publications
Latest Publications
- Open Access
- 22 October 2026
- Published by AIP Publishing in International Journal of Fluid Engineering
- Vol. 4 (2)
Analysis of rotor dynamic characteristics in turbine-type energy recovery devices for seawater desalination
As a critical energy-saving component in reverse osmosis desalination systems, turbine-type energy recovery devices require rigorous dynamic stability evaluation. To guarantee the safety and stability of these devices, this study employs free and constrained modal analyses of its rotor components using Ansys Workbench. The critical speeds, natural frequencies, and other pertinent parameters of the rotor under various rotational speeds and material properties are calculated. Additionally, the dynamic characteristics of rotors crafted from polyethylene, gray cast iron, stainless steel, structural steel, and 40Cr are examined. The findings reveal that the first six natural frequencies of the rotor in free mode are nearly zero, with the natural frequencies progressively increasing from the 7th to 12th modes, accompanied by varying degrees of deformation. Under constrained conditions, the modes of a turbine-type energy recovery device exhibit stability and are less susceptible to resonance. As the rotational speed varies, the natural frequencies of the modes gradually increase, with critical speeds emerging solely in the first three modes, specifically 93 336, 1.1786 × 105, and 1.3139 × 105 rpm, respectively. Furthermore, as the density and Young’s modulus of the rotor material increase, the first three critical speeds also exhibit a continuous upward trend. This research provides a foundational design basis for the structural stability of turbine-type energy recovery integrated machines.
- 22 October 2026
- Published by AIP Publishing in International Journal of Fluid Engineering
- Vol. 4 (2)
Open AccessAnalysis of rotor dynamic characteristics in turbine-type energy recovery devices for seawater desalination
As a critical energy-saving component in reverse osmosis desalination systems, turbine-type energy recovery devices require rigorous dynamic stability evaluation. To guarantee the safety and stability of these devices, this study employs free and constrained modal analyses of its rotor components using Ansys Workbench. The critical speeds, natural frequencies, and other pertinent parameters of the rotor under various rotational speeds and material properties are calculated. Additionally, the dynamic characteristics of rotors crafted from polyethylene, gray cast iron, stainless steel, structural steel, and 40Cr are examined. The findings reveal that the first six natural frequencies of the rotor in free mode are nearly zero, with the natural frequencies progressively increasing from the 7th to 12th modes, accompanied by varying degrees of deformation. Under constrained conditions, the modes of a turbine-type energy recovery device exhibit stability and are less susceptible to resonance. As the rotational speed varies, the natural frequencies of the modes gradually increase, with critical speeds emerging solely in the first three modes, specifically 93 336, 1.1786 × 105, and 1.3139 × 105 rpm, respectively. Furthermore, as the density and Young’s modulus of the rotor material increase, the first three critical speeds also exhibit a continuous upward trend. This research provides a foundational design basis for the structural stability of turbine-type energy recovery integrated machines.
- Open Access
- 1 October 2026
- Published by Elsevier in Desalination and Water Treatment
- Vol. 328
Energy-exergy analysis of SWRO desalination adopting energy recovery devices of PX and HTC in an island plant case
- 1 October 2026
- Published by Elsevier in Desalination and Water Treatment
- Vol. 328
Open AccessEnergy-exergy analysis of SWRO desalination adopting energy recovery devices of PX and HTC in an island plant case
- Open Access
- 6 January 2026
- Published by AIP Publishing in International Journal of Fluid Engineering
- Vol. 3 (2)
Simulation analysis of internal flow field characteristics of high-speed centrifugal pump as a turbine
The pump as turbine (PAT), utilizing high-speed centrifugal pumps, boasts technical advantages such as low cost, compact structure, and broad flow adaptability. The present work is a numerical simulation study of the internal flow fields of the volute, runner, and draft tube of a PAT using CFX flow field analysis software. The findings reveal that the maximum energy loss in the PAT runner amounts to 11.5%, accounting for 49.67% of the total loss. The energy loss in the volute section follows closely at 10.6%, constituting 45.79% of the total loss, while the loss in the draft tube is minimal at 1.05%. The PAT volute exhibits significant velocity variations at the inlet section, accompanied by rapid changes and suboptimal internal pressure distribution. Within each flow passage of the runner, the velocity distribution is uneven, with vortices present on the suction side of the blades. The pressure distribution at the center of the runner is nonuniform, characterized by large and multiple small vortices. In the draft tube, the pressure distribution is uneven, with vortex bands at the center causing some energy loss; however, the overall internal flow characteristics remain favorable.
- 6 January 2026
- Published by AIP Publishing in International Journal of Fluid Engineering
- Vol. 3 (2)
Open AccessSimulation analysis of internal flow field characteristics of high-speed centrifugal pump as a turbine
The pump as turbine (PAT), utilizing high-speed centrifugal pumps, boasts technical advantages such as low cost, compact structure, and broad flow adaptability. The present work is a numerical simulation study of the internal flow fields of the volute, runner, and draft tube of a PAT using CFX flow field analysis software. The findings reveal that the maximum energy loss in the PAT runner amounts to 11.5%, accounting for 49.67% of the total loss. The energy loss in the volute section follows closely at 10.6%, constituting 45.79% of the total loss, while the loss in the draft tube is minimal at 1.05%. The PAT volute exhibits significant velocity variations at the inlet section, accompanied by rapid changes and suboptimal internal pressure distribution. Within each flow passage of the runner, the velocity distribution is uneven, with vortices present on the suction side of the blades. The pressure distribution at the center of the runner is nonuniform, characterized by large and multiple small vortices. In the draft tube, the pressure distribution is uneven, with vortex bands at the center causing some energy loss; however, the overall internal flow characteristics remain favorable.