ANAldenora Vieira Santos Neta

Aldenora Vieira Santos Neta

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Aldenora Vieira Santos Neta has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Improving mechanical strength and leachability behavior of bauxite tailings for dry stacking using Portland Cement

    by Gilson Gabriel Teixeira Varela, David Braga Fernandes, Aldenora Vieira Santos Neta, Alisson Do Nascimento Lima, Lara Pereira Tavares Mendes, Manoel Leandro Araújo e Farias, Carina Silvani

    The disposal of tailings has become a challenge for the mining sector, environmental agencies, and society. This research aims to analyze the geomechanical and environmental behavior of cemented bauxite tailings (BT) for use in cemented dry tailings piles, a new trend for tailing disposal. The experimental program consisted of a series of unconfined compression tests and splitting tensile tests in BT with addition of 2%, 4%, and 6% of Portland Cement (Ci), and compacted at 18 kN/m3, 19 kN/m3, and 20 kN/m3. Leachability and solubilization tests were done with specimens with 20 kN/m3 and Ci of 0%, 4%, and 6%. All samples were done with water content of 18% and cured for 7 days. Increasing in Portland cement content and dry units of weight increases unconfined compressive strength (qu) and splitting tensile strength (qt); therefore, the increase in porosity decreases these mechanical properties. The importance of those parameters was confirmed by ANOVA and Tukey test analysis. The porosity/Portland cement content index allowed the prediction of qu and qt of BT-Portland cement blends; however, the qt/qu remained constant (0.14) and independent of this index. The environmental analysis showed that the addition of Portland cement to BT reduced the concentration of manganese in the leachate and the concentrations of chromium, iron, and sodium in the solubilized extract, complying with the toxicity and drinking water standards recommended by the USEPA. However, it also increased the concentration of aluminum in both extracts, exceeding the limit set by CONAMA 460 (Brazilian standard).

  • Asphalt mixtures with bauxite residue as a partial replacement for fine aggregates: technical, economic, and environmental assessment

    by Lara Pereira Tavares Mendes, Osires de Medeiros Melo Neto, Leonardo Rodrigues Guedes, Gilson Gabriel Teixeira Varela, Aldenora Vieira Santos Neta, David Braga Fernandes, Leda Christiane de Figueiredo Lopes Lucena, Luciana de Figueiredo Lopes Lucena

    The generation of waste is inherent to production systems, necessitating proper management to mitigate environmental and economic impacts. In the mining sector, bauxite residue (BR), a byproduct from alumina production, presents significant environmental challenges due to its contaminant potential but also offers opportunities for reuse. This study evaluates the incorporation of BR in asphalt mixtures as a partial replacement for fine aggregates, assessing mechanical performance, environmental aspects, and economic impact. The methodology involved three stages: (i) physical, chemical, and environmental characterization of BR and aggregates; (ii) production of asphalt mixtures with 5%, 10%, and 15% BR, and mechanical characterization before and after long-term thermal aging (LTOA), including indirect tensile strength (ITS), moisture-induced damage, resilient modulus (RM), dynamic modulus (DM), fatigue life, and permanent deformation resistance; and (iii) economic and environmental evaluation, including leaching tests to assess the mobility of soluble metals and cost analysis for storage and disposal by the mining company. Results indicated that BR incorporation increased fine content, improving stiffness and performance in ITS, RM, DM, and permanent deformation resistance, both before and after LTOA. However, soluble metals in BR led to higher moisture susceptibility, requiring mitigation strategies. From an environmental perspective, BR reduced soluble metal mobility, indicating potential for residue encapsulation. Economically, partial BR substitution reduced storage and disposal costs for the mining company. These findings suggest that using bauxite residue in asphalt mixtures can be a sustainable, economically viable solution for the mining industry.