Mustafa Akif Yildirim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mustafa Akif Yildirim has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Arne Benjamin Renz
University of Warwick
3 shared publications - James A. Gott
University of Warwick
3 shared publications - Marina Antoniou
University of Warwick
3 shared publications - Peter Michael Gammon
University of Warwick
3 shared publications - Kyrylo Melnyk
University of Warwick
2 shared publications - Phillip Andrew Mawby
Warwick University
2 shared publications
Latest Publications
- Open Access
- 21 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1057, 95-101
Body Diode Performance of the 4H-SiC 3.3 kV Semi-SJ MOSFET
This study investigates static and dynamic behavior of a 3.3 kV semi-Superjunction (SJ) MOSFET, compared with a conventional planar MOSFET. The semi-SJ was designed using a cost-effective trench side-wall implantation and SiO 2 refill fabrication method and evaluated through TCAD simulations. The optimized semi-SJ MOSFET designs, reduces R ON by 19% and increases BV by 500 V compared with the planar MOSFET, while maintaining a comparable reverse recovery charge (Q RR ). The proposed semi-SJ design demonstrated the best R ON ×Q RR figure of merit (17.8 mΩ·µC), outperforming the conventional planar MOSFET design (19.7 mΩ·µC).
- 21 May 2026
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1057, 95-101
Open AccessBody Diode Performance of the 4H-SiC 3.3 kV Semi-SJ MOSFET
This study investigates static and dynamic behavior of a 3.3 kV semi-Superjunction (SJ) MOSFET, compared with a conventional planar MOSFET. The semi-SJ was designed using a cost-effective trench side-wall implantation and SiO 2 refill fabrication method and evaluated through TCAD simulations. The optimized semi-SJ MOSFET designs, reduces R ON by 19% and increases BV by 500 V compared with the planar MOSFET, while maintaining a comparable reverse recovery charge (Q RR ). The proposed semi-SJ design demonstrated the best R ON ×Q RR figure of merit (17.8 mΩ·µC), outperforming the conventional planar MOSFET design (19.7 mΩ·µC).
- Open Access
- 20 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1192, 59-65
Preliminary Study into Ferroelectric Properties of ALD Al-Doped HfO2/SiO2/ 4H-SiC MOS Capacitors for Improved Short Circuit Reliability
We investigate the physical and electrical characteristics of the Al-doped or undoped HfO 2 /SiO 2 gate stacks on 4H-SiC by testing MOSCAP chips fabricated in house. A clear reduction in accumulation capacitance (C ox ) with increasing chuck temperature from room temperature up to 523 K is observed, with Al-doping playing a key role and aligning with temperature-dependent Landau ferroelectric theory. Chips annealed at 1100°C in N₂ ambient show the highest C ox decrease rates while maintaining functional MOS interfaces with acceptable flatband voltage, hysteresis, and Dit profiles. TCAD simulations on a double trench MOSFET model, based on the extracted data indicate improved electro-thermal performance, demonstrating that Al-doped HfO₂/SiO₂ gate stacks are a promising approach for enhancing 4H-SiC power devices.
- 20 May 2026
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1192, 59-65
Open AccessPreliminary Study into Ferroelectric Properties of ALD Al-Doped HfO2/SiO2/ 4H-SiC MOS Capacitors for Improved Short Circuit Reliability
We investigate the physical and electrical characteristics of the Al-doped or undoped HfO 2 /SiO 2 gate stacks on 4H-SiC by testing MOSCAP chips fabricated in house. A clear reduction in accumulation capacitance (C ox ) with increasing chuck temperature from room temperature up to 523 K is observed, with Al-doping playing a key role and aligning with temperature-dependent Landau ferroelectric theory. Chips annealed at 1100°C in N₂ ambient show the highest C ox decrease rates while maintaining functional MOS interfaces with acceptable flatband voltage, hysteresis, and Dit profiles. TCAD simulations on a double trench MOSFET model, based on the extracted data indicate improved electro-thermal performance, demonstrating that Al-doped HfO₂/SiO₂ gate stacks are a promising approach for enhancing 4H-SiC power devices.
- Open Access
- 12 September 2025
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1024, 73-77
Influence of Gold Nanoparticle Distribution on the Performance of Self-Powered Silicon Carbide Ultraviolet Photodetector
This study presents a systematic investigation into the influence of gold nanoparticles on the performance of a self-powered metal-semiconductor-metal (MSM) 4H-SiC UV photodetector (SiC-UVPD), with a focus on the nonsymmetric contact phenomenon arising from differences in the contact areas of the gold electrode pair under 254 nm UV light exposure. The self-powered SiC-UVPD device exhibited a very good sensitivity of 9.34 x 104, great responsivity of 0.30 A/W, and excellent detectivity of 7.0 x 1011 cm. Hz1/2.W-1 under 254 nm UV light without any external power. In fact, the specific detectivity of the self-powered SiC-UVPD improved by 70 % following the application of Au nanoparticles. Self-powered photodetectors are desirable devices for green energy applications due to their unique advantages such as smaller footprints and wireless operation.
- 12 September 2025
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1024, 73-77
Open AccessInfluence of Gold Nanoparticle Distribution on the Performance of Self-Powered Silicon Carbide Ultraviolet Photodetector
This study presents a systematic investigation into the influence of gold nanoparticles on the performance of a self-powered metal-semiconductor-metal (MSM) 4H-SiC UV photodetector (SiC-UVPD), with a focus on the nonsymmetric contact phenomenon arising from differences in the contact areas of the gold electrode pair under 254 nm UV light exposure. The self-powered SiC-UVPD device exhibited a very good sensitivity of 9.34 x 104, great responsivity of 0.30 A/W, and excellent detectivity of 7.0 x 1011 cm. Hz1/2.W-1 under 254 nm UV light without any external power. In fact, the specific detectivity of the self-powered SiC-UVPD improved by 70 % following the application of Au nanoparticles. Self-powered photodetectors are desirable devices for green energy applications due to their unique advantages such as smaller footprints and wireless operation.
- Open Access
- 8 September 2025
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1158, 67-74
Investigation of Interface and Reliability of 3C- and 4H-SiC MOS Structures through Gate Dielectric Stacking and Post-Deposition Annealing
This study investigates the interface and reliability of metal-oxide-semiconductor capacitors (MOSCAPs) based on 3C-SiC and 4H-SiC using atomic layer deposition (ALD) and post-deposition annealing (PDA). SiO2 and HfO2/SiO2 were used as dielectric layers, with systematic PDA treatments conducted at 600°C, 900°C, and 1100°C in N₂ or forming gas (FG, a mixture of H2 and N2) environments to evaluate the impact of the PDA conditions on the interface characteristics of SiC MOSCAPs. The flat-band voltage for 3C-SiC MOSCAPs averaged at 0.68 ± 0.05 V for SiO2/3C-SiC/Si samples and 2.35 ± 0.01 V for HfO2/SiO2/3C-SiC samples when MOSCAPs annealed at 1100°C in FG. PDA in forming gas also significantly reduced hysteresis, dropping from 1.75 V to 0.18 V for SiO2/3C-SiC and from 2.49 V to 0.04 V for HfO2/SiO2/3C-SiC samples. For 4H-SiC MOSCAPs, as-deposited devices exhibited high oxide charges and poor interface quality. The average flat-band voltages for SiO2/4H-SiC were 9.01 ± 0.15 V, while HfO2/SiO2 MOSCAPs showed 6.65 ± 0.02 V. After PDA at 1100°C, the flat-band voltage improved to-0.65 ± 0.035 V for SiO2/4H-SiC and-0.50 ± 0.05 V for HfO2/SiO2/4H-SiC. Additionally, hysteresis was reduced from 0.61 V to 0.15 V for SiO2/4H-SiC and from 0.23 V to 0.05 V for HfO2/SiO2/4H-SiC samples. We propose a figure of merit (FOM) which is defined as the ratio of the breakdown field to the product of flatband voltage shift, hysteresis effect, and density of interface states. The results demonstrate that PDA significantly enhances the interface quality and electrical characteristics of the MOS capacitors (MOSCAPs), with nitrogen (N2) PDA yielding higher FOM for 4H-SiC stacks and forming FG PDA showing superior interfacial quality for 3C-SiC stacks.
- 8 September 2025
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1158, 67-74
Open AccessInvestigation of Interface and Reliability of 3C- and 4H-SiC MOS Structures through Gate Dielectric Stacking and Post-Deposition Annealing
This study investigates the interface and reliability of metal-oxide-semiconductor capacitors (MOSCAPs) based on 3C-SiC and 4H-SiC using atomic layer deposition (ALD) and post-deposition annealing (PDA). SiO2 and HfO2/SiO2 were used as dielectric layers, with systematic PDA treatments conducted at 600°C, 900°C, and 1100°C in N₂ or forming gas (FG, a mixture of H2 and N2) environments to evaluate the impact of the PDA conditions on the interface characteristics of SiC MOSCAPs. The flat-band voltage for 3C-SiC MOSCAPs averaged at 0.68 ± 0.05 V for SiO2/3C-SiC/Si samples and 2.35 ± 0.01 V for HfO2/SiO2/3C-SiC samples when MOSCAPs annealed at 1100°C in FG. PDA in forming gas also significantly reduced hysteresis, dropping from 1.75 V to 0.18 V for SiO2/3C-SiC and from 2.49 V to 0.04 V for HfO2/SiO2/3C-SiC samples. For 4H-SiC MOSCAPs, as-deposited devices exhibited high oxide charges and poor interface quality. The average flat-band voltages for SiO2/4H-SiC were 9.01 ± 0.15 V, while HfO2/SiO2 MOSCAPs showed 6.65 ± 0.02 V. After PDA at 1100°C, the flat-band voltage improved to-0.65 ± 0.035 V for SiO2/4H-SiC and-0.50 ± 0.05 V for HfO2/SiO2/4H-SiC. Additionally, hysteresis was reduced from 0.61 V to 0.15 V for SiO2/4H-SiC and from 0.23 V to 0.05 V for HfO2/SiO2/4H-SiC samples. We propose a figure of merit (FOM) which is defined as the ratio of the breakdown field to the product of flatband voltage shift, hysteresis effect, and density of interface states. The results demonstrate that PDA significantly enhances the interface quality and electrical characteristics of the MOS capacitors (MOSCAPs), with nitrogen (N2) PDA yielding higher FOM for 4H-SiC stacks and forming FG PDA showing superior interfacial quality for 3C-SiC stacks.