РБРоман Божек

Роман Божек

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Роман Божек has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    ДОСЛІДЖЕННЯ КІНЕТОСТАТИЧНИХ ПАРАМЕТРІВ СИМЕТРИЧНИХ ВАЖІЛЬНИХ МЕХАНІЗМІВ З ПЕРІОДИЧНИМ ВИСТОЄМ ВИХІДНОЇ ЛАНКИ

    by В’яЧеслав Харжевський, Роман Божек, Максим Марченко, Антон Харжевський

    The paper considers the problem of determining the kinetostatic characteristics of Chebyshev linkage mechanisms, whose link length ratios provide the plotting of symmetrical curves of the coupler’s point. The upper section of the coupler’s curve of the mentioned mechanisms was used to approximate a circular arc. Such mechanisms can be used independently in mechanical engineering, providing path generating motion of a link with the “best approximation conditions” according to Chebyshev within its certain segment. These conditions include the presence of a uniform deviation from a circular arc with the maximum possible number of interpolation nodes within the approximation segment of the coupler curve. Path generating linkage mechanisms can also be used as a basis for designing mechanisms with periodic dwell of the output link, which is considered in the article. To determine the optimal geometric parameters for these mechanisms, it is essential to conduct both kinematic and kinetostatic analyses. In the presented paper, a methodology for determining the kinetostatic parameters of the dwell mechanisms is introduced, calculations according to the obtained formulae are also performed, and results are presented in the form of diagrams of maximum values of the main kinetostatic parameters of the mechanisms, such as: reactions in the kinematic pairs, instantaneous and cyclic efficiency coefficients, the force increasing coefficient, which allows to carry out the optimal synthesis of mechanisms with the dwell of the output link. Based on the obtained dependencies, a computer program was made up, which was used to study the force loads on the mechanisms’ links under dynamic loading. The values of the dynamic parameters of linkage mechanisms that were obtained can be used for preliminary strength calculations of the links and parts of the mechanisms.

  • Open Access

    ОПТИМІЗАЦІЙНЕ ПРОЕКТУВАННЯ ЗВАРНИХ МЕТАЛОКОНСТРУКЦІЙ З ВИКОРИСТАННЯМ SOLIDWORKS SIMULATION НА ПРИКЛАДІ СКЛАДСЬКИХ СТЕЛАЖІВ

    by В’яЧеслав Харжевський, Роман Божек, Світлана Підгайчук

    The paper is dedicated to the problem of the optimization design of welded metal structures using the method of the finite element analysis, using the criteria of maximum von Mises stress for ductile materials and maximum displacement to ensure the stiffness of the model, that are implemented in SOLIDWORKS Simulation – Computer-Aided Engineering software. As shown in the paper on the example of strength calculation of a rack for a warehouse, when calculation model has welded metal parts with sheet metal, it has a number of peculiarities. In particular, the division of the parts of the model into the finite elements was carried out for the channel elements and for the rectangular pipes as finite elements of the type of “beam”, but sheet metal parts must be considered as finite elements of the type of “shell”, and the contact of metal sheets to beams must be considered as welded joints, using the contact type “bonded”. The load on the structure was simulated by placing two standard Euro pallets (1200x800) in the center on each shelf of the rack, and the load was simulated as “Gravity force”. According to the results of the strength calculations using SOLIDWORKS Simulation, which were obtained using the optimization techniques that are available in the engineering software, changes to the construction of the rack were proposed, which provided the required factor of safety. Therefore, the use of a proposed design will allow much more efficient usage of the warehouse area and will prevent critical rack overload.