Shashikant Chaturvedi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shashikant Chaturvedi has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Ajitanshu Vedrtnam
Institute of Construction and Architecture, Slovak Academy of Science, Bratislava, Slovakia
2 shared publications - Martin Tchingnabé Palou
Institute of Construction and Architecture, Slovak Academy of Sciences, Bratislava, Slovak Republic
2 shared publications Ajitanshu Vedrtnam
Institute of Construction and Architecture
1 shared publication- Kishor Kalauni
Institute of Construction and Architecture, Slovak Academy of Science, 84503 Bratislava, Slovakia
1 shared publication - Kishor Kalauni
Institute of Construction and Architecture, Slovak Academy of Sciences, 84503 Bratislava, Slovakia
1 shared publication Martin-Tchingnabé Palou
Institute of Construction and Architecture
1 shared publication
Latest Publications
- Open Access
- 1 September 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3302 (1) , 012005
Feasibility Study on 3D-Printed Phase Change Material Containers Embedded in Mortar Slabs for Thermal Regulation
Integrating phase-change materials (PCMs) into building envelopes presents a promising pathway for passive thermal regulation and energy efficiency in the built environment. This study evaluates the feasibility of embedding paraffin-based PCM (RT27) within cementitious systems using 3D-printed polylactic acid (PLA) containers to enhance the thermal performance of mortar slab systems. Cylindrical containers (20 mm diameter) were fabricated using PLA and embedded into mortar slabs (300 mm × 300 mm × 50 mm) at a 15% volume fraction. Control specimens without PCM were also prepared for comparative analysis. A custom-built experimental setup, comprising a hot-box chamber and a vertical exposure assembly, was developed to simulate solar radiation and monitor heat transfer behaviour under controlled laboratory conditions. Thermal testing verified that PCM-integrated mortar slabs reduced peak external surface temperatures by approximately 1.5-1.8 °C compared with reference slabs under both open and hot-box experimental conditions. In addition, the PCM specimens exhibited a thermal delay of approximately 20-30 minutes, indicating slower heat propagation through the material. This behaviour is attributed to the latent heat storage capacity of RT27 (approximately 160-164 kJ kg −1 during phase transition) enhancing the effective thermal inertia of the mortar system within the PCM melting temperature range (27-29 °C). Additionally, ultrasonic pulse velocity (UPV) measurements confirmed that the integration of PCM containers did not compromise structural integrity. These results establish a scalable and fabrication-compatible strategy for improving the thermal inertia of cement-based construction materials, offering significant potential for energy-efficient and climate-responsive building applications.
- 1 September 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3302 (1) , 012005
Open AccessFeasibility Study on 3D-Printed Phase Change Material Containers Embedded in Mortar Slabs for Thermal Regulation
Integrating phase-change materials (PCMs) into building envelopes presents a promising pathway for passive thermal regulation and energy efficiency in the built environment. This study evaluates the feasibility of embedding paraffin-based PCM (RT27) within cementitious systems using 3D-printed polylactic acid (PLA) containers to enhance the thermal performance of mortar slab systems. Cylindrical containers (20 mm diameter) were fabricated using PLA and embedded into mortar slabs (300 mm × 300 mm × 50 mm) at a 15% volume fraction. Control specimens without PCM were also prepared for comparative analysis. A custom-built experimental setup, comprising a hot-box chamber and a vertical exposure assembly, was developed to simulate solar radiation and monitor heat transfer behaviour under controlled laboratory conditions. Thermal testing verified that PCM-integrated mortar slabs reduced peak external surface temperatures by approximately 1.5-1.8 °C compared with reference slabs under both open and hot-box experimental conditions. In addition, the PCM specimens exhibited a thermal delay of approximately 20-30 minutes, indicating slower heat propagation through the material. This behaviour is attributed to the latent heat storage capacity of RT27 (approximately 160-164 kJ kg −1 during phase transition) enhancing the effective thermal inertia of the mortar system within the PCM melting temperature range (27-29 °C). Additionally, ultrasonic pulse velocity (UPV) measurements confirmed that the integration of PCM containers did not compromise structural integrity. These results establish a scalable and fabrication-compatible strategy for improving the thermal inertia of cement-based construction materials, offering significant potential for energy-efficient and climate-responsive building applications.
- Open Access
- 25 August 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (9) , 449
Climate-Responsive Modelling of Carbonation and Strength Degradation in Conventional and Sustainable Cementitious Composites: Experimental Validation for OPC Concrete
This study presents a physics-informed, climate-responsive model for predicting carbonation depth and compressive strength degradation in conventional and sustainable cementitious composites under real environmental exposure. The Semi-Theoretical Predictive Degradation (STPD) model couples hourly temperature, relative humidity, and CO2 concentration data with two-dimensional diffusion–reaction equations implemented in FEniCS. The model accounts for humidity-sensitive diffusivity, temperature-activated carbonation kinetics, and CO2 consumption via Langmuir decay. Experimental validation was performed on ordinary Portland cement (OPC) concrete specimens exposed for 30 days to climate profiles representative of Portugal (average 14.2 °C, RH 74%, CO2 ~417 ppm) and Slovakia (average 4.7 °C, RH 80%, CO2 ~414 ppm). Carbonation depth increased from 0 to 0.30 mm in Portugal and up to 0.15 mm in Slovakia, with corresponding predicted reductions in compressive strength relative to the corresponding uncarbonated reference of up to 25% and 14%, respectively. The STPD model accurately reproduced these trends, achieving RMSE values of 0.008 mm for carbonation depth and 1.55 MPa for compressive strength in OPC concrete. To assess the broader applicability of the framework, simulations were extended to fly ash/slag-blended, geopolymer, and biochar-containing concretes using material-specific parameters. Among the simulated systems, geopolymer concrete showed the highest predicted durability, with carbonation depths below 1 mm and strength loss below 10%. A degradation index combining carbonation depth and strength loss mapped high-risk zones near the exposed surface, particularly under warm and fluctuating climatic conditions. The model provides a transferable framework for climate-informed durability assessment, material selection, and the design of sustainable cementitious composites.
- 25 August 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (9) , 449
Open AccessClimate-Responsive Modelling of Carbonation and Strength Degradation in Conventional and Sustainable Cementitious Composites: Experimental Validation for OPC Concrete
This study presents a physics-informed, climate-responsive model for predicting carbonation depth and compressive strength degradation in conventional and sustainable cementitious composites under real environmental exposure. The Semi-Theoretical Predictive Degradation (STPD) model couples hourly temperature, relative humidity, and CO2 concentration data with two-dimensional diffusion–reaction equations implemented in FEniCS. The model accounts for humidity-sensitive diffusivity, temperature-activated carbonation kinetics, and CO2 consumption via Langmuir decay. Experimental validation was performed on ordinary Portland cement (OPC) concrete specimens exposed for 30 days to climate profiles representative of Portugal (average 14.2 °C, RH 74%, CO2 ~417 ppm) and Slovakia (average 4.7 °C, RH 80%, CO2 ~414 ppm). Carbonation depth increased from 0 to 0.30 mm in Portugal and up to 0.15 mm in Slovakia, with corresponding predicted reductions in compressive strength relative to the corresponding uncarbonated reference of up to 25% and 14%, respectively. The STPD model accurately reproduced these trends, achieving RMSE values of 0.008 mm for carbonation depth and 1.55 MPa for compressive strength in OPC concrete. To assess the broader applicability of the framework, simulations were extended to fly ash/slag-blended, geopolymer, and biochar-containing concretes using material-specific parameters. Among the simulated systems, geopolymer concrete showed the highest predicted durability, with carbonation depths below 1 mm and strength loss below 10%. A degradation index combining carbonation depth and strength loss mapped high-risk zones near the exposed surface, particularly under warm and fluctuating climatic conditions. The model provides a transferable framework for climate-informed durability assessment, material selection, and the design of sustainable cementitious composites.
- Open Access
- 3 October 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (10) , 542
Life Cycle Assessment of Barite- and Magnetite-Based Self-Compacting Concrete Composites for Radiation Shielding Applications
The growing demand for radiation-shielded infrastructure highlights the need for materials that balance shielding performance with environmental and economic sustainability. Heavyweight self-compacting concretes (HWSCC), commonly produced with barite (BaSO4) or magnetite (Fe3O4) aggregates, lack systematic life cycle comparisons. The aim of this study is to systematically compare barite- and magnetite-based HWSCC in terms of life cycle environmental impacts, life cycle cost, functional performance (strength and shielding), and end-of-life circularity, in order to identify the more sustainable and cost-effective material for radiation shielding infrastructure. This study applies cradle-to-grave life cycle assessment (LCA) and life cycle cost analysis (LCC), in accordance with ISO 14040/14044 and ISO 15686-5, to evaluate barite- and magnetite-based HWSCC. Results show that magnetite concrete reduces global warming potential by 19% eutrophication by 24%, and fossil resource depletion by 23%, while lowering life cycle costs by ~23%. Both concretes achieve comparable compressive strength (~48 MPa) and shielding efficiency (µ ≈ 0.28–0.30 cm−1), meeting NCRP 147 and IAEA SRS-47 standards. These findings demonstrate that magnetite-based HWSCC offers a more sustainable, cost-effective, and ethically sourced alternative for radiation shielding in healthcare, nuclear, and industrial applications. In addition, the scientific significance of this work lies in establishing a transferable methodological framework that combines LCA, LCC, and performance-normalized indicators. This enables scientists and practitioners worldwide to benchmark heavyweight concretes consistently and to adapt sustainability-informed material choices to their own regional contexts.
- 3 October 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (10) , 542
Open AccessLife Cycle Assessment of Barite- and Magnetite-Based Self-Compacting Concrete Composites for Radiation Shielding Applications
The growing demand for radiation-shielded infrastructure highlights the need for materials that balance shielding performance with environmental and economic sustainability. Heavyweight self-compacting concretes (HWSCC), commonly produced with barite (BaSO4) or magnetite (Fe3O4) aggregates, lack systematic life cycle comparisons. The aim of this study is to systematically compare barite- and magnetite-based HWSCC in terms of life cycle environmental impacts, life cycle cost, functional performance (strength and shielding), and end-of-life circularity, in order to identify the more sustainable and cost-effective material for radiation shielding infrastructure. This study applies cradle-to-grave life cycle assessment (LCA) and life cycle cost analysis (LCC), in accordance with ISO 14040/14044 and ISO 15686-5, to evaluate barite- and magnetite-based HWSCC. Results show that magnetite concrete reduces global warming potential by 19% eutrophication by 24%, and fossil resource depletion by 23%, while lowering life cycle costs by ~23%. Both concretes achieve comparable compressive strength (~48 MPa) and shielding efficiency (µ ≈ 0.28–0.30 cm−1), meeting NCRP 147 and IAEA SRS-47 standards. These findings demonstrate that magnetite-based HWSCC offers a more sustainable, cost-effective, and ethically sourced alternative for radiation shielding in healthcare, nuclear, and industrial applications. In addition, the scientific significance of this work lies in establishing a transferable methodological framework that combines LCA, LCC, and performance-normalized indicators. This enables scientists and practitioners worldwide to benchmark heavyweight concretes consistently and to adapt sustainability-informed material choices to their own regional contexts.