Liam Pledger
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Liam Pledger has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Santiago Pujol
University of Canterbury Christchurch New Zealand
3 shared publications Charles Kerby
Department of Civil and Environmental Engineering, University of Canterbury, Canterbury, New Zealand
1 shared publication- Edgar Chacón-Valero
Department of Structural and Geotechnical Engineering, Pontificia Universidad Católica de Chile, Santiago, Chile
1 shared publication Lucas Laughery
Exponent Inc. Menlo Park California US
1 shared publication- Matias A. Hube
Department of Structural and Geotechnical Engineering, Pontificia Universidad Católica de Chile, Santiago, Chile
1 shared publication - Prateek Shah
Wiss, Janney, Elstner Associates, Inc. Northbrook Illinois US
1 shared publication
Latest Publications
- Open Access
- 29 April 2026
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 55 (10) , 2223-2232
Discussion of Paper by Chin, Cheng, Lepage, and Lequesne
- 29 April 2026
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 55 (10) , 2223-2232
Open AccessDiscussion of Paper by Chin, Cheng, Lepage, and Lequesne
- Open Access
- 19 April 2026
- Published by Wiley in Earthquake Spectra
- Vol. 42 (2) , e70063
A Comparison of Ground Motion Intensity Measures for Estimating Collapse
This study examines the use of 15 different intensity measures (IMs) for estimating structural collapse using results from incremental dynamic analysis (IDA). IDA results from 54 numerical models were considered, including (i) 12 reinforced concrete (RC) frame structures, (ii) 16 RC wall–frame structures and (iii) 26 steel buckling‐restrained braced frame structures. The height of the structures ranged from 2 to 20 storeys, with the initial fundamental period varying from 0.25 to 2.3 s. IMs were evaluated using two existing criteria: efficiency and sufficiency, along with their predictability and practicality. Among the 11 period‐independent IMs examined, peak ground velocity (PGV) and velocity spectrum intensity (VSI) were the best correlated with the intensity at collapse. For structures with an initial period shorter than 1 s, VSI was the most efficient of all IMs considered. For structures with periods longer than 1 s, the period‐dependent IMs—average spectral acceleration and filtered incremental velocity—were found to be the most efficient IMs. The efficiency of the IMs was observed to be relatively insensitive to the lateral load‐resisting system. In general, the period‐independent and period‐dependent IMs identified above exhibited comparable levels of sufficiency. Results indicate that velocity‐based IMs, such as PGV and VSI, performed well in terms of efficiency and sufficiency, particularly for short period structures. From a practical perspective, PGV and VSI offer advantages due to their efficiency, simplicity and period independence, making them suitable IMs for region‐wide or portfolio‐level assessments.
- 19 April 2026
- Published by Wiley in Earthquake Spectra
- Vol. 42 (2) , e70063
Open AccessA Comparison of Ground Motion Intensity Measures for Estimating Collapse
This study examines the use of 15 different intensity measures (IMs) for estimating structural collapse using results from incremental dynamic analysis (IDA). IDA results from 54 numerical models were considered, including (i) 12 reinforced concrete (RC) frame structures, (ii) 16 RC wall–frame structures and (iii) 26 steel buckling‐restrained braced frame structures. The height of the structures ranged from 2 to 20 storeys, with the initial fundamental period varying from 0.25 to 2.3 s. IMs were evaluated using two existing criteria: efficiency and sufficiency, along with their predictability and practicality. Among the 11 period‐independent IMs examined, peak ground velocity (PGV) and velocity spectrum intensity (VSI) were the best correlated with the intensity at collapse. For structures with an initial period shorter than 1 s, VSI was the most efficient of all IMs considered. For structures with periods longer than 1 s, the period‐dependent IMs—average spectral acceleration and filtered incremental velocity—were found to be the most efficient IMs. The efficiency of the IMs was observed to be relatively insensitive to the lateral load‐resisting system. In general, the period‐independent and period‐dependent IMs identified above exhibited comparable levels of sufficiency. Results indicate that velocity‐based IMs, such as PGV and VSI, performed well in terms of efficiency and sufficiency, particularly for short period structures. From a practical perspective, PGV and VSI offer advantages due to their efficiency, simplicity and period independence, making them suitable IMs for region‐wide or portfolio‐level assessments.
- Open Access
- 4 March 2026
- Published by New Zealand Society for Earthquake Engineering in Bulletin of the New Zealand Society for Earthquake Engineering
- Vol. 59 (1) , 39-50
Estimating the dynamic properties of wall-frame structures
This study outlines a robust method to approximate the dynamic properties of wall-frame structures with a reasonable degree of reliability based on simple mechanics. The seismic response and drift demand of a structure are largely influenced by its first translational period and mode-shape. This study develops a method to estimate the storey stiffness of a wall, which can be combined with the storey stiffness of a frame to estimate the fundamental period and mode-shape for wall-frame structures. The fundamental period and mode-shape are calculated using this effective storey stiffness and Rayleigh’s principle. A total of 301 wall-frame structures were sized to evaluate the reliability of the proposed method. Structures ranged from 2 to 25 storeys tall. The fundamental period and mode-shape estimated using the proposed method were compared with results from eigenvalue analysis of a detailed linear structural model. The proposed method leads to approximately 4% error on average for estimating the fundamental period of regular structures. The proposed method leads to 5% error on average for irregular structures with partial height walls, as well as variations in storey height, and lateral stiffness. For regular wall-frame structures, the proposed method led to average errors of 4% when estimating the roof mode-shape factor and 2% when estimating the maximum difference in mode-shape factor from one floor to the next, a proxy for storey drift. These errors were 5% and 15% for irregular structures with partial height walls. Results were also compared with estimates obtained from existing empirical equations to approximate the period of wall-frame structures, highlighting that empirical equations lead to greater error, between 15 and 70% depending on the equation. The method outlined in this paper enables users to estimate or corroborate the fundamental period, mode-shape, and lateral displacement for a dual wall-frame structure with a reasonable degree of reliability, suitable for preliminary design and linear analysis. Tools have been developed in MathCAD and python to automate the procedure for estimating the dynamic properties of wall-frame structures and are available here.
- 4 March 2026
- Published by New Zealand Society for Earthquake Engineering in Bulletin of the New Zealand Society for Earthquake Engineering
- Vol. 59 (1) , 39-50
Open AccessEstimating the dynamic properties of wall-frame structures
This study outlines a robust method to approximate the dynamic properties of wall-frame structures with a reasonable degree of reliability based on simple mechanics. The seismic response and drift demand of a structure are largely influenced by its first translational period and mode-shape. This study develops a method to estimate the storey stiffness of a wall, which can be combined with the storey stiffness of a frame to estimate the fundamental period and mode-shape for wall-frame structures. The fundamental period and mode-shape are calculated using this effective storey stiffness and Rayleigh’s principle. A total of 301 wall-frame structures were sized to evaluate the reliability of the proposed method. Structures ranged from 2 to 25 storeys tall. The fundamental period and mode-shape estimated using the proposed method were compared with results from eigenvalue analysis of a detailed linear structural model. The proposed method leads to approximately 4% error on average for estimating the fundamental period of regular structures. The proposed method leads to 5% error on average for irregular structures with partial height walls, as well as variations in storey height, and lateral stiffness. For regular wall-frame structures, the proposed method led to average errors of 4% when estimating the roof mode-shape factor and 2% when estimating the maximum difference in mode-shape factor from one floor to the next, a proxy for storey drift. These errors were 5% and 15% for irregular structures with partial height walls. Results were also compared with estimates obtained from existing empirical equations to approximate the period of wall-frame structures, highlighting that empirical equations lead to greater error, between 15 and 70% depending on the equation. The method outlined in this paper enables users to estimate or corroborate the fundamental period, mode-shape, and lateral displacement for a dual wall-frame structure with a reasonable degree of reliability, suitable for preliminary design and linear analysis. Tools have been developed in MathCAD and python to automate the procedure for estimating the dynamic properties of wall-frame structures and are available here.
- 4 October 2025
- Published by Wiley in Earthquake Spectra
- Vol. 41 (5) , 3805-3825
Effect of displacement cycles on the drift capacity of reinforced concrete structural walls
Estimating the drift capacity (DC) of reinforced concrete (RC) structural walls is crucial to assess seismic performance of buildings in earthquake-prone regions. Numerous investigations have been conducted on the subject. Nevertheless, most of these investigations focus on walls without prior damage and a single expected earthquake. Recent tests conducted on RC walls suggest that displacement history does not affect DC, if the maximum amplitude of previous cycles is smaller than a threshold, regardless of the number of applied cycles. How to define such threshold and how prior cycles with amplitudes exceeding it affect DC remains unclear. This study assessed the effect of cyclic displacement history—or displacement cycles—on the DC of RC structural walls, using a statistical analysis. Results indicate that DC decreases as the intensity of cyclic displacement history increases. Nevertheless, this decrease is considerably smaller than differences between measured values of DC and estimates obtained using available empirical formulations and a calibrated machine learning algorithm.
- 4 October 2025
- Published by Wiley in Earthquake Spectra
- Vol. 41 (5) , 3805-3825
Effect of displacement cycles on the drift capacity of reinforced concrete structural walls
Estimating the drift capacity (DC) of reinforced concrete (RC) structural walls is crucial to assess seismic performance of buildings in earthquake-prone regions. Numerous investigations have been conducted on the subject. Nevertheless, most of these investigations focus on walls without prior damage and a single expected earthquake. Recent tests conducted on RC walls suggest that displacement history does not affect DC, if the maximum amplitude of previous cycles is smaller than a threshold, regardless of the number of applied cycles. How to define such threshold and how prior cycles with amplitudes exceeding it affect DC remains unclear. This study assessed the effect of cyclic displacement history—or displacement cycles—on the DC of RC structural walls, using a statistical analysis. Results indicate that DC decreases as the intensity of cyclic displacement history increases. Nevertheless, this decrease is considerably smaller than differences between measured values of DC and estimates obtained using available empirical formulations and a calibrated machine learning algorithm.