Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yosef Budiman has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hot-spot mitigation in disc brakes using an air-scoop with bypass feature: An experimental investigation coupled with CFD simulation

    by Agus Widyianto, Yosef Budiman, Beni Setya Nugraha, Moch Solikin, Hanggar Setya Novanto, Almer Anandiko, Edwar Yazid

  • Open Access

    Enhancing mechanic performance through a mechanics competency booster model: A case study at an Indonesian mining company (PT Pamapersada Nusantara)

    by Sugiri, Mochamad Bruri Triyono, Zainal Arifin, Yanuar Agung Fadlullah, Yosef Budiman, Muhamad Riyan Maulana, Fajar Surya Ramadhani, Rizal Justian Setiawan, Khakam Ma'RUf

    The increasing global demand for coal energy has intensified production pressure on mining companies, particularly PT Pama Persada Nusantara. However, apprentice mechanics' competency gaps resulted in high redo service rates and operational losses. This study developed and tested a Mechanic Competency Booster (MCB) program using the ADDIE (Analysis, Design, Development, and Evaluation) research model to accelerate the competencies of apprentice mechanics. The program's design was grounded in Bloom's Taxonomy, mapping each of its three components to a distinct learning domain: the Knowledge Booster addressed the cognitive domain through structured knowledge sharing, the Experience Booster developed the psychomotor domain through team leadership and mentoring, and the Competition Booster cultivated the affective domain through quiz-based evaluation with rewards. Needs analysis, conducted through observation, interviews, and maintenance record review, identified a structural mismatch between participants' general SMK vocational backgrounds and the site-specific requirements of the HD785-7 heavy equipment platform as the primary driver of competency gaps. The intervention involved 24 apprentice mechanics in an experimental group with a control group for comparison. Results demonstrated substantial improvement in learning outcomes, with the experimental group's average posttest score increasing from 41.20 to 86.50, yielding a normalized gain of g = 0.77, classified as high. Expert validation confirmed the program's feasibility with scores of 85% (BNSP), 83% (Industry Experts), and 87% (Media Experts). Operational metrics showed a 48% reduction in periodic service hours and declining redo percentages from 21.43% to below 5% following MCB implementation, directly contributing to reduced equipment downtime and improved plant productivity. While results are promising, this study was conducted at a single district site over one intervention cycle; multi-site replication and longitudinal follow-up assessments are recommended to confirm the sustained effectiveness and broader applicability of the MCB model.

  • Open Access

    Data-driven analysis of growth factors in oyster mushroom cultivation: a case study from Indonesia’s market

    by Yosef Budiman, Gilang Adi Prasetyo, Asma’ Khoirunnisa’, Hanifah Mar’ATush Shalihah, Muhamad Riyan Maulana, Yanuar Agung Fadlullah, Sugiri Sugiri

    The oyster mushroom is one of the potential agricultural products that can be developed as an alternative to other agricultural products, to maintain Indonesia's economic condition. However, the production of oyster mushrooms remains low and falls short of the minimum amount of market demand. This study employs a machine learning (ML)–based approach to identify the key parameters influencing oyster mushroom production rates. Recursive feature elimination (RFE) was applied to reduce the initial 19 features to nine, enabling faster processing while maintaining high predictive accuracy. The results showed that agricultural features showed a high contribution rather than environmental, economic, and demographic features. Furthermore, these parameters were related to the train-test analysis to visualize the statistical analysis shown by the best method, adaptive boosting (AdaBoost), with coefficient of determination (R2), mean squared error (MSE), and mean absolute error (MAE) values of 0.997575, 0.009841, and 0.085884, respectively. Related research relevant to the research findings was analyzed to validate that agricultural product features affect the decline of oyster mushroom production. Other supported research conducted by integrating real-time analysis and twin digital models, which can enhance substrate quality.

  • Open Access

    Electromechanical and CFD-coupled analysis of deflector-guided savonius pico-hydro turbine with quarter-circular blade rotors

    by Rinasa Agistya Anugrah, Sudarja, Yosef Budiman, Muhammad Yusri Ilyas

    Global electricity demand continues to rise, increasing dependence on fossil fuels and accelerating greenhouse gas emissions that contribute to climate instability. Small-scale hydropower offers a clean alternative, particularly for distributed and space-constrained applications where conventional hydropower systems are difficult to implement. Among available concepts, the Savonius Pico-Hydro Turbine (SPHT) is attractive because of its simple structure, low production cost, and good self-starting capability. However, previous studies have mainly focused on mechanical performance, while the combined evaluation of mechanical response, electrical output, generator efficiency, and hydrodynamic flow behavior remains limited. The novelty of this study lies in the use of a quarter-circular blade profile instead of the commonly used semi-circular Savonius blade, combined with experimental electromechanical testing, CFD-based flow visualization, and deflector-angle variation. Two- and four-blade SPHT configurations were examined under realistic loading conditions, while CFD simulation was employed to clarify velocity distribution, pressure loading, momentum exchange, and deflector-guided flow patterns. The results showed that the four-blade rotor produced higher torque and a stronger electrical response than the two-blade rotor. CFD contour analysis supported these findings by showing stronger momentum exchange and more distributed pressure loading around the higher-solidity rotor. The deflector investigation further indicated that a 30° deflector angle provided the most effective flow redirection and pressure distribution among the evaluated cases. Overall, the proposed experimental and numerical framework provides a practical basis for optimizing quarter-circular SPHT design through blade configuration selection and deflector-angle tuning, supporting compact and reliable pico-scale clean energy generation for remote and low-infrastructure applications.

  • Experimental Study and Computational Fluid Dynamics Simulation of Savonius Wind Turbines Using L-shaped Composite Blades for Low-wind Speed

    by R. A. Anugrah, A. Widyianto, Y. Budiman, F. Yudhanto, R. R. Sika, A. Yudianto, A. Rahmandhika, N. A. Fauzi, M. Noga, M. H. Peeie

    Vertical-axis wind turbines (VAWTs) face significant challenges, including low aerodynamic efficiency, unstable aerodynamics, auto-startup issues, and a low power coefficient. Therefore, numerous studies regarding VAWT experiments have been conducted to improve their performance. Looking for gaps, L-shaped blades can be implemented as a promising innovation. This research aims to identify the potential advantages of improving aerodynamic and mechanical responses compared to existing blade products. The research methodology employed experiments and simulations to highlight the differences in results (percentage error) by implementing three geometries (2, 3, and 4 blades) and testing them at average wind speeds of 4 and 6 m/s. By measuring RPM, load, torque, tip speed ratio (TSR), and coefficient of power , results unveiled that the 3-bladed turbine outperformed the 2- and 4-bladed geometries. In addition, the best performance of the 3-bladed turbine was achieved at an average speed of 4 m/s, as indicated by the measured parameters. Finally, the validation disclosed a mean average error (MAE) of 12.16%, indicating a reasonable agreement between the simulation and experimental results, and the model can be considered acceptable for engineering analysis purposes.

  • Open Access

    Hot-Spot Mitigation in Disc Brakes Using an Air-Scoop with Bypass Feature: An Experimental Investigation Coupled with CFD Simulation

    by Agus Widyianto, Yosef Budiman, Beni Setya Nugraha, Moch Solikin, Hanggar Setya Novanto, Almer Anandiko, Edwar Yazid

    Braking safety and performance are strongly influenced by disc-brake thermal behavior, where frictional heating can trigger brake fade, accelerate wear, and, in hydraulic systems, promote vapor lock due to brake-fluid boiling. To enhance heat removal without the adverse flow, this study investigates scoop-assisted motorcycle disc-brake cooling and introduces a bypass feature within the scoop to intentionally redistribute airflow and suppress localized hot spots. The research was conducted based on experimental findings combined with CFD simulations to validate the flow behavior and interpret the thermal-flow mechanisms through the velocity field, while thermomechanical analysis was used to assess the cooling effect on the mechanical response of the brake disc. Results show that the closed-bypass configuration delivers the most coherent flow at 50–70 km/h, whereas the open-bypass configuration becomes more effective at 90 km/h, consistent with improved high-speed flow structure and mixing. Measured cooling outcomes indicate that higher speeds generally reduce peak disc temperature via stronger external convection, but increased internal losses introduce a trade-off between heat dissipation magnitude and cooling time. An angle-of-attack assessment demonstrates that 10° provides the best practical balance by reducing drag coefficient while maintaining comparable flow delivery. Thermo-mechanical results further support the benefit that open-bypass cooling reduces peak von Mises stress relative to closed bypass, consistent with reduced thermal-stress amplification. Eventually, the bypass-integrated scoop is a practical approach for enhancing thermal uniformity while maintaining an acceptable trade-off between cooling performance and aerodynamic drag.

  • Open Access

    Novel construction of hybrid wind turbine with solar panels: A comprehensive analysis through experimental study and numerical simulation

    by Rinasa Agistya Anugrah, Yosef Budiman, Agus Widyianto, Alpan Hadi, Hanggar Setya Novanto, Aan Yudianto