AZAblay Zhunusov

Ablay Zhunusov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ablay Zhunusov has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Additional Extraction of Aluminum and Silicon During Integrated Bauxite Processing in Kazakhstan

    by P. O. Bykov, M. M. Suyundikov, A. V. Bogomolov, A. B. Kuandykov, A. K. Zhunusov, N. K. Kulumbaev

    In this paper, we experimentally investigated the integrated processing of high-iron Kazakh bauxites by reducing smelting of ore–coke–lime briquettes to produce an Fe-Al-Si metallic alloy, which is of potential interest for steel deoxidation, together with calcium-aluminate slag, which is of potential interest for alumina extraction. Briquettes containing bauxite, metallurgical coke (10–20 wt.%), and freshly calcined lime (10 wt.%, constant) were melted in a muffle furnace at a temperature of 1200–1450 °C. Complete separation of metal and slag was achieved at 1400–1450 °C, whereas at 1200–1350 °C, separation remained incomplete. Changing the coke/bauxite mass ratio in the charge from 0.125 to 0.286 increased the total content of metallic Si, Al and Fe in the recovered metallic product from 77.1 to 98.66 wt.%, according to X-ray fluorescence (XRF) analysis after two-stage magnetic separation; the metallic product obtained with a coke/bauxite ratio of 0.286 in the charge contained 72.8% Fe, 23% Al and 2.86% Si (with minor impurities of Ti, Mn and Cr), while the associated slag was represented mainly by CaO (59.5%) and Al2O3 (34.0%). These slag characteristics indicate its potential suitability for alumina extraction or as a filler for structural concrete. The proposed route represents a potentially low-waste alternative for processing high-iron bauxites that are poorly suited to the classical Bayer process, avoiding the direct formation of red mud and supporting Kazakhstan’s transition toward closed-loop bauxite processing.

  • Open Access

    The Influence of High-Temperature Roasting on the Phase Composition of Pellets Based on Aluminum Slags and Their Testing in the Smelting of Ferrosilicon

    by Ablay Zhunusov, Renat Tyulyubayev, Altynsary Bakirov, Aygul Zhunusova, Anar Kenzhebekova, Onuralp Yücel

    This paper examines a resource-saving technology for ferrosilicon smelting using industrial waste, specifically aluminum slag and aspiration dust from ferroalloy production. A technological approach is proposed based on the preliminary pelletization of finely dispersed aluminum slag to improve the physicochemical properties of the charge materials and ensure their efficient use in the metallurgical process. Pellets were produced by granulation in a disk granulator using a lignosulfonate binder, followed by drying and high-temperature firing in the temperature range of 600–800 °C. Microstructural and energy-dispersive analysis revealed the formation of a stable aluminosilicate matrix, represented predominantly by mullite-like phases, ferrosilicate inclusions, and calcium–magnesium silicates. The formation of these phases contributes to the strengthening of the pellet structure and the formation of intergranular bonds during heat treatment. Experimental ferrosilicon smelting was conducted in a laboratory ore-thermal electric arc furnace. The results demonstrated a stable electrothermal smelting regime, satisfactory charge layer gas permeability, and effective reduction processes. The resulting alloy corresponds to FS-45 ferrosilicon grade with a silicon content of approximately 48%. It was established that aluminum slag-based pellets actively participate in the formation of an aluminosilicate slag system of the SiO2-Al2O3-CaO-MgO type, ensuring favorable slag physicochemical properties and efficient separation of the metallic and slag phases. The proposed approach enables the incorporation of industrial waste into metallurgical production, reducing the environmental impact, and increasing the resource efficiency of silicon ferroalloy production processes.


  • Open Access

    A Study on the Iron Extraction from Kazakhstan Bauxite

    by Petr Bykov, Almaz Kuandykov, Merkhat Suyundikov, Alexey Bogomolov, Ablay Zhunusov, Ruslan Mukanov, Eduard Siemens

    This study investigated the use of coke for the recovery of minerals included in the composition of ferruginous sands of the alumina production from bauxites of Kazakhstan. The granulometric and mineralogical analyses showed that that fine ferruginous sands were enriched with iron oxides (up to 67.8% Fe₂O₃), while the coarse fractions possessed higher alumina concentrations, primarily in gibbsite and kaolinite. The reduction experiments were conducted using ore-coke-lime briquettes, which were prepared from ferruginous sands (0.40 - 0.63 mm fraction), metallurgical coke, lime, and bentonite. The testing of smelting from 1200 - 1450 °C, demonstrated that the metallic iron was completely separated from slag at 1400–1450 °C, obtaining a metallic phase with 92.62% Fe. The coke content influenced the reduction efficiency, with results obtained at up to 20% coke. The product of the metallic phase was analyzed by X-Ray Fluorescence (XRF), confirming the high purity of the metallic product, while the slag phase, rich in Al₂O₃, SiO₂, and CaO, was successfully tested as a filler in concrete production. The analysis of the chemical composition of the resulting slag revealed the possibility of its use as a filler in the production of construction concrete.