Vlad Ștefan Constantin
Vlad Ștefan Constantin has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Ion Aurel Perianu
ISIM Timisoara
2 shared publications - Iuliana Duma
ISIM Timisoara
2 shared publications - Alin Constantin Murariu
ISIM Timisoara
1 shared publication - Constantin Alin Antal
C Delgaz-Grid S.A.
1 shared publication - Darius Guran
ISIM Timisoara
1 shared publication - Lia Nicoleta Boțilă
ISIM Timisoara
1 shared publication
Latest Publications
- 17 November 2025
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1030, 17-21
Process Parameters Testing for Various Aluminium Alloys Using Laser Beam Welding
Laser beam welding (LBW) is an advanced welding technique based on keyhole welding, which makes use of a laser in order to join metals or thermoplastics. LBW is employed mainly in high volume applications which require high precision using automation, such as the automotive industry. The weldability, welding speed and penetration depth is mostly dependent on the power supplied to the laser, but the material and thickness of the workpiece also influences these parameters. This paper will present how various welding parameters such as power, frequency, the shape and size of the focal point affect different types of aluminium alloys, in an attempt to find the ideal parameters for the 5083 and 6082 aluminium alloys.
- 17 November 2025
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 1030, 17-21
Process Parameters Testing for Various Aluminium Alloys Using Laser Beam Welding
Laser beam welding (LBW) is an advanced welding technique based on keyhole welding, which makes use of a laser in order to join metals or thermoplastics. LBW is employed mainly in high volume applications which require high precision using automation, such as the automotive industry. The weldability, welding speed and penetration depth is mostly dependent on the power supplied to the laser, but the material and thickness of the workpiece also influences these parameters. This paper will present how various welding parameters such as power, frequency, the shape and size of the focal point affect different types of aluminium alloys, in an attempt to find the ideal parameters for the 5083 and 6082 aluminium alloys.
- 29 October 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 378, 77-90
Optimization of Hardness and Adhesion of Al2O3-40%TiO2 Coating Obtained by HVOF Spraying through Process Parameter Control
The paper presents an optimization approach for enhancing the hardness and adhesion of Al 2 O 3 -40%TiO 2 coatings produced by High-Velocity Oxi-Fuel (HVOF) thermal spraying, aimed at their application in protecting components subjected to aggressive environments and severe mechanical stresses [1-4]. Through an experimental factorial program, key parameters of the HVOF process such as fuel flow rate, oxygen flow rate, spray distance, and powder feed rate were investigated to identify optimal conditions leading to improved mechanical performance of the deposited layers. Vickers hardness and tensile adhesion tests were utilized to evaluate the properties of the coatings. The results indicated that increasing the fuel and oxygen flow rates, coupled with reducing the spray distance, significantly increased the hardness of the coatings, achieving values up to 244 HV5. Moreover, optimizing these parameters maximized the coating-substrate adhesion, reaching values exceeding 30 MPa. Microstructural analysis using scanning electron microscopy (SEM) revealed that optimized HVOF parameters generated dense layers with low porosity and enhanced adhesion at the layer-substrate interface, thereby explaining the superior mechanical behaviors of the coatings. These findings demonstrate the capability of HVOF technology to produce Al 2 O 3 -40%TiO 2 layers with optimal mechanical properties, essential for applications requiring resistance to wear, impact, and corrosive environments [5-7].
- 29 October 2025
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 378, 77-90
Optimization of Hardness and Adhesion of Al2O3-40%TiO2 Coating Obtained by HVOF Spraying through Process Parameter Control
The paper presents an optimization approach for enhancing the hardness and adhesion of Al 2 O 3 -40%TiO 2 coatings produced by High-Velocity Oxi-Fuel (HVOF) thermal spraying, aimed at their application in protecting components subjected to aggressive environments and severe mechanical stresses [1-4]. Through an experimental factorial program, key parameters of the HVOF process such as fuel flow rate, oxygen flow rate, spray distance, and powder feed rate were investigated to identify optimal conditions leading to improved mechanical performance of the deposited layers. Vickers hardness and tensile adhesion tests were utilized to evaluate the properties of the coatings. The results indicated that increasing the fuel and oxygen flow rates, coupled with reducing the spray distance, significantly increased the hardness of the coatings, achieving values up to 244 HV5. Moreover, optimizing these parameters maximized the coating-substrate adhesion, reaching values exceeding 30 MPa. Microstructural analysis using scanning electron microscopy (SEM) revealed that optimized HVOF parameters generated dense layers with low porosity and enhanced adhesion at the layer-substrate interface, thereby explaining the superior mechanical behaviors of the coatings. These findings demonstrate the capability of HVOF technology to produce Al 2 O 3 -40%TiO 2 layers with optimal mechanical properties, essential for applications requiring resistance to wear, impact, and corrosive environments [5-7].
- 28 October 2025
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1161, 45-53
Submerged Friction Stir Processing of En Aw 5754 Aluminum Alloy
Friction stir processing is a research domain in a continuous dynamic that has led to the development of some variants of its application. One of the variants is submerged friction stir processing to avoid excessive heating of the processing tool and the materials to be processed. The paper presents the results of the experimental research carried out at ISIM Timisoara regarding the submerged friction stir processing (SFSP) of the EN AW 5754 aluminum alloy with a thickness of 3 mm. SFSP processing was performed in one pass and in multiple passes using a processing tool having conical pin with four flat chamfers and different processing parameters. To evaluate the processed material, structural analyses, hardness measurements, as well as mechanical tensile and static bending tests were performed.The preliminary experimental research carried out within the ongoing Nucleu PN 23 37 01 02 project shows favorable results in the SFSP processing of the EN AW 5754 aluminum alloy.
- 28 October 2025
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1161, 45-53
Submerged Friction Stir Processing of En Aw 5754 Aluminum Alloy
Friction stir processing is a research domain in a continuous dynamic that has led to the development of some variants of its application. One of the variants is submerged friction stir processing to avoid excessive heating of the processing tool and the materials to be processed. The paper presents the results of the experimental research carried out at ISIM Timisoara regarding the submerged friction stir processing (SFSP) of the EN AW 5754 aluminum alloy with a thickness of 3 mm. SFSP processing was performed in one pass and in multiple passes using a processing tool having conical pin with four flat chamfers and different processing parameters. To evaluate the processed material, structural analyses, hardness measurements, as well as mechanical tensile and static bending tests were performed.The preliminary experimental research carried out within the ongoing Nucleu PN 23 37 01 02 project shows favorable results in the SFSP processing of the EN AW 5754 aluminum alloy.