Veronika Veľková
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Veronika Veľková has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- František Kačík
Department of Chemistry and Chemical Technology, Faculty of Wood Sciences and Technology, Technical University in Zvolen, 96001 Zvolen, Slovakia, Slovakia
2 shared publications - Katarína Trojanová
Department of Chemistry and Chemical Technology, Faculty of Wood Sciences and Technology, Technical University in Zvolen, 96001 Zvolen, Slovakia
2 shared publications - Andrea Majlingová
Department of Fire Protection, Faculty of Wood Sciences and Technology, Technical University in Zvolen, T. G. Masaryka 24, 960 01 Zvolen, Slovakia
1 shared publication - Elena Kmeťová
Department of Fire Protection, Faculty of Wood Sciences and Technology, Technical University in Zvolen, 96001 Zvolen, Slovakia, Slovakia
1 shared publication - Iveta Mitterová
Department of Fire Protection, Faculty of Wood Sciences and Technology, Technical University in Zvolen, T. G. Masaryka, 960 01 Zvolen, Slovakia
1 shared publication
Latest Publications
- Open Access
- 6 November 2026
- Published by MDPI AG in Preprints.org
Volatile Products at Thermal Loading of Spruce Wood
During the burning of wood, various toxic compounds are produced; therefore, fire retardants are used. However, fire retardants also produce toxic compounds, so the effort is to find low-cost, efficient, and environmentally friendly alternatives. We combined a highly durable polyurea (P) coating with expandable graphite (EG), which is very effective against fire. We thermally loaded untreated spruce wood and specimens treated with different coating combinations using an infrared heater. Volatile compounds were analysed by gas chromatography coupled with mass spectrometry (GC-MS) and high-performance liquid chromatography (HPLC). Various groups of volatile substances were determined, including terpenes (alpha- and beta-pinene, limonene), acids (formic, acetic), carbonyl compounds (formaldehyde, acetaldehyde, furfural, 5-hydroxymethylfurfural), and sulfur trioxide. The addition of EG to polyurea significantly increases the resistance of spruce wood to thermal loading while simultaneously reducing the amount of arisen volatile gases. An optimal combination of EG and P was identified to ensure effective thermal resistance and low concentrations of evolved gases.
- 6 November 2026
- Published by MDPI AG in Preprints.org
Open AccessVolatile Products at Thermal Loading of Spruce Wood
During the burning of wood, various toxic compounds are produced; therefore, fire retardants are used. However, fire retardants also produce toxic compounds, so the effort is to find low-cost, efficient, and environmentally friendly alternatives. We combined a highly durable polyurea (P) coating with expandable graphite (EG), which is very effective against fire. We thermally loaded untreated spruce wood and specimens treated with different coating combinations using an infrared heater. Volatile compounds were analysed by gas chromatography coupled with mass spectrometry (GC-MS) and high-performance liquid chromatography (HPLC). Various groups of volatile substances were determined, including terpenes (alpha- and beta-pinene, limonene), acids (formic, acetic), carbonyl compounds (formaldehyde, acetaldehyde, furfural, 5-hydroxymethylfurfural), and sulfur trioxide. The addition of EG to polyurea significantly increases the resistance of spruce wood to thermal loading while simultaneously reducing the amount of arisen volatile gases. An optimal combination of EG and P was identified to ensure effective thermal resistance and low concentrations of evolved gases.
- Open Access
Comprehensive Evaluation of a High-Resistance Fire Retardant via Simultaneous Thermal Analysis, Gas Chromatography–Mass Spectrometry, and Mass Loss Study
In this study, we evaluate a phosphorus-based fire retardant (HR Prof) on Norway spruce using Simultaneous Thermal Analysis (STA: TG/DTG/DSC), Gas Chromatography–Mass Spectrometry (GC–MS), and bench-scale mass-loss measurements. Relative to the untreated reference, HR Prof re-routes decomposition toward earlier dehydration and transient char, simplifies the evolved gas mixture in the 150–250 °C range, and reduces burning intensity during 600 s of radiant exposure. Across 150/200/250 °C, identified components fell from 20/24/51 (reference) to 5/9/9 (HR Prof); no phosphorus-containing volatiles were detected in this window. Mass-loss tests showed a lower average burning rate (0.107 vs. 0.156%·s−1) and a smaller cumulative loss at 600 s (64.2 ± 9.5% vs. 93.7 ± 2.1%; one-way ANOVA, p < 0.05 for percentage loss). STA was conducted in air; the transient char formed at an intermediate temperature is oxidized near ~600 °C, explaining the low final residue despite earlier charring. A count-based Poisson model corroborated the significant reduction in volatile component richness for HR Prof (p < 0.001). The cross-method correspondences—earlier condensed-phase dehydration/char → leaner volatile pool → lower and flatter burning-rate profiles—support a condensed-phase-dominated protection mechanism within the conditions studied.
Open AccessComprehensive Evaluation of a High-Resistance Fire Retardant via Simultaneous Thermal Analysis, Gas Chromatography–Mass Spectrometry, and Mass Loss Study
In this study, we evaluate a phosphorus-based fire retardant (HR Prof) on Norway spruce using Simultaneous Thermal Analysis (STA: TG/DTG/DSC), Gas Chromatography–Mass Spectrometry (GC–MS), and bench-scale mass-loss measurements. Relative to the untreated reference, HR Prof re-routes decomposition toward earlier dehydration and transient char, simplifies the evolved gas mixture in the 150–250 °C range, and reduces burning intensity during 600 s of radiant exposure. Across 150/200/250 °C, identified components fell from 20/24/51 (reference) to 5/9/9 (HR Prof); no phosphorus-containing volatiles were detected in this window. Mass-loss tests showed a lower average burning rate (0.107 vs. 0.156%·s−1) and a smaller cumulative loss at 600 s (64.2 ± 9.5% vs. 93.7 ± 2.1%; one-way ANOVA, p < 0.05 for percentage loss). STA was conducted in air; the transient char formed at an intermediate temperature is oxidized near ~600 °C, explaining the low final residue despite earlier charring. A count-based Poisson model corroborated the significant reduction in volatile component richness for HR Prof (p < 0.001). The cross-method correspondences—earlier condensed-phase dehydration/char → leaner volatile pool → lower and flatter burning-rate profiles—support a condensed-phase-dominated protection mechanism within the conditions studied.
- Open Access
Volatile Organic Compounds Arising from Wood Polymers on Thermal Loading of Spruce Wood
The thermal degradation of wood polymers (cellulose, hemicelluloses, and lignin) results in the production of volatile products, some of which are toxic or act as irritants. In the present work, we focus on the effect of wood treatment on the formation of volatile products, conducting experiments on thermally treated (TTW), flame-retardant-treated (FRW), and untreated (REF) spruce wood. The samples were subjected to thermal loading at 150 °C, 200 °C, and 250 °C with the subsequent collection of degradation products. We evaluated the effect of wood treatment on the formation of volatile organic compounds (VOCs) using gas chromatography–mass spectrometry (GC-MS). The number and quantity of VOCs are significantly affected by the type of wood treatment and the thermal loading temperature. At the temperature of 250 °C, the concentration and number of VOCs increased significantly. The highest number of VOCs was identified in the untreated wood samples (54 compounds, mostly aldehydes, ketones, and phenols), with a lower number being identified in the flame-retardant-treated samples (9 compounds, mainly furfural) and the lowest number being identified in thermally treated wood samples (3 compounds, aliphatic hydrocarbons). Typical volatile products included furfural, furfurylalcohol, and α-pinene. Qualitative and quantitative analysis of VOCs under thermal loading is important in evaluating the wood burning process and the toxic properties of the consequent gaseous products.
Open AccessVolatile Organic Compounds Arising from Wood Polymers on Thermal Loading of Spruce Wood
The thermal degradation of wood polymers (cellulose, hemicelluloses, and lignin) results in the production of volatile products, some of which are toxic or act as irritants. In the present work, we focus on the effect of wood treatment on the formation of volatile products, conducting experiments on thermally treated (TTW), flame-retardant-treated (FRW), and untreated (REF) spruce wood. The samples were subjected to thermal loading at 150 °C, 200 °C, and 250 °C with the subsequent collection of degradation products. We evaluated the effect of wood treatment on the formation of volatile organic compounds (VOCs) using gas chromatography–mass spectrometry (GC-MS). The number and quantity of VOCs are significantly affected by the type of wood treatment and the thermal loading temperature. At the temperature of 250 °C, the concentration and number of VOCs increased significantly. The highest number of VOCs was identified in the untreated wood samples (54 compounds, mostly aldehydes, ketones, and phenols), with a lower number being identified in the flame-retardant-treated samples (9 compounds, mainly furfural) and the lowest number being identified in thermally treated wood samples (3 compounds, aliphatic hydrocarbons). Typical volatile products included furfural, furfurylalcohol, and α-pinene. Qualitative and quantitative analysis of VOCs under thermal loading is important in evaluating the wood burning process and the toxic properties of the consequent gaseous products.