Qingsong Li
Qingsong Li has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Chunhua Wang
Guizhou Provincial Laboratory of Intelligent Development and Efficient Utilization of Energy, Guiyang 550025, China
1 shared publication - Lu He
School of Mining Engineering, Guizhou Institute of Technology, Guiyang 550003, China
1 shared publication - Shujin Zhang
Guizhou Provincial Laboratory of Intelligent Development and Efficient Utilization of Energy, Guiyang 550081, China
1 shared publication - Wei Zhang
Guizhou Energy Group Corporation Limited, Guiyang 550081, China
1 shared publication - Xiaodong Wang
Guizhou Provincial Laboratory of Intelligent Development and Efficient Utilization of Energy, Guiyang 550025, China
1 shared publication - Yuqi Shang
Guizhou Research Institute of Coal Mine Design Co., Ltd.,Guiyang 550025, China
1 shared publication
Latest Publications
- Open Access
Impact of Gas Components on the Determination of Coal Mine Gas Content: A Case Study from China
Accurate measurement of coal seam gas content forms the core foundation for coal mine disaster prevention and coalbed methane resource development. However, as coal mining in China extends into deeper strata, multi-component gases (CH4, CO2, N2, etc.) exhibit competitive adsorption effects and dynamic differentiation characteristics. These behaviors pose significant challenges to traditional measurement standards based on the “single methane-dominated system” assumption. This study systematically analyzes the competitive adsorption mechanisms of multi-component gases. By integrating gas data from major coal-producing provinces in China (such as Guizhou, Anhui, and Xinjiang), we reveal the heterogeneous distribution characteristics of gas components and their controlling factors, including coalification degree, burial depth, and maceral components. Case studies from Henan and Shanxi provinces demonstrate that neglecting the strong adsorption hysteresis of CO2 and the rapid desorption characteristics of N2 induces a systematic error exceeding 25% in total gas content measurements within areas high in non-methane components. To address these issues, we propose a “hierarchical measurement and real-time correction” framework for multi-component gas content. This framework categorizes gas measurement into four levels—ranging from single-component to all components—based on the complexity of geological conditions. It combines differentiated measurement with dynamic correction to improve the accuracy of gas content evaluation under complex geological conditions. This research provides a more reliable theoretical basis for gas pressure prediction and mine gas grade identification, offering substantial theoretical significance and engineering value for enhancing safety guarantees in deep coal mining.
Open AccessImpact of Gas Components on the Determination of Coal Mine Gas Content: A Case Study from China
Accurate measurement of coal seam gas content forms the core foundation for coal mine disaster prevention and coalbed methane resource development. However, as coal mining in China extends into deeper strata, multi-component gases (CH4, CO2, N2, etc.) exhibit competitive adsorption effects and dynamic differentiation characteristics. These behaviors pose significant challenges to traditional measurement standards based on the “single methane-dominated system” assumption. This study systematically analyzes the competitive adsorption mechanisms of multi-component gases. By integrating gas data from major coal-producing provinces in China (such as Guizhou, Anhui, and Xinjiang), we reveal the heterogeneous distribution characteristics of gas components and their controlling factors, including coalification degree, burial depth, and maceral components. Case studies from Henan and Shanxi provinces demonstrate that neglecting the strong adsorption hysteresis of CO2 and the rapid desorption characteristics of N2 induces a systematic error exceeding 25% in total gas content measurements within areas high in non-methane components. To address these issues, we propose a “hierarchical measurement and real-time correction” framework for multi-component gas content. This framework categorizes gas measurement into four levels—ranging from single-component to all components—based on the complexity of geological conditions. It combines differentiated measurement with dynamic correction to improve the accuracy of gas content evaluation under complex geological conditions. This research provides a more reliable theoretical basis for gas pressure prediction and mine gas grade identification, offering substantial theoretical significance and engineering value for enhancing safety guarantees in deep coal mining.
- Open Access
Study on Borehole Trajectory Deviation Characteristics and Influencing Factors in Three-Soft Coal Seams
The three-soft coal seam, characterized by its soft and fractured lithology, is prone to significant drilling trajectory deviation during construction, severely compromising gas drainage efficiency and posing potential safety hazards. In order to clarify the variation law of the drilling trajectory of the three-soft coal seam, this paper takes the 14205 working face of a mine in Guizhou Province as the engineering background, monitors and analyzes the drilling inclination and the change in the inclination, and then studies the influencing factors of the drilling deviation. During on-site drilling and coring operations and data monitoring, the formation lithology and fragmentation conditions were clarified, and the trajectories of gas drainage drilling holes at 15°, 30°, 45°, 60°, 75°, and 90° were obtained. It was observed that when the hole inclination is 15° or 90°, the change Δ value of the hole inclination is close to 0°. When the hole inclination is 30° or 75°, the change Δ value of the hole inclination is close to 2.5°. When the hole inclination is 45° or 60°, the change Δ value of the borehole inclination angle is close to 4.5°. The curve of the change Δ value of the borehole inclination angle and the borehole inclination angle was obtained by calculation and fitting, and the whole presents a quadratic function distribution. It was inferred that when the inclination angle of the borehole is 50°, the change Δ value of the inclination angle of the borehole reaches the maximum value, which is close to 5°, that is, the deflection of the gas drainage borehole is the largest. With the help of this curve, the deflection was predicted, controlled, and reduced. The AHP analysis model was used to rank the importance of the influencing factors of the borehole trajectory, and it was clear that the main controlling factor of the borehole deflection is the geological factor. This study provides a basis for obtaining the drilling deflection law and determining the appropriate drilling deflection control and correction technology.
Open AccessStudy on Borehole Trajectory Deviation Characteristics and Influencing Factors in Three-Soft Coal Seams
The three-soft coal seam, characterized by its soft and fractured lithology, is prone to significant drilling trajectory deviation during construction, severely compromising gas drainage efficiency and posing potential safety hazards. In order to clarify the variation law of the drilling trajectory of the three-soft coal seam, this paper takes the 14205 working face of a mine in Guizhou Province as the engineering background, monitors and analyzes the drilling inclination and the change in the inclination, and then studies the influencing factors of the drilling deviation. During on-site drilling and coring operations and data monitoring, the formation lithology and fragmentation conditions were clarified, and the trajectories of gas drainage drilling holes at 15°, 30°, 45°, 60°, 75°, and 90° were obtained. It was observed that when the hole inclination is 15° or 90°, the change Δ value of the hole inclination is close to 0°. When the hole inclination is 30° or 75°, the change Δ value of the hole inclination is close to 2.5°. When the hole inclination is 45° or 60°, the change Δ value of the borehole inclination angle is close to 4.5°. The curve of the change Δ value of the borehole inclination angle and the borehole inclination angle was obtained by calculation and fitting, and the whole presents a quadratic function distribution. It was inferred that when the inclination angle of the borehole is 50°, the change Δ value of the inclination angle of the borehole reaches the maximum value, which is close to 5°, that is, the deflection of the gas drainage borehole is the largest. With the help of this curve, the deflection was predicted, controlled, and reduced. The AHP analysis model was used to rank the importance of the influencing factors of the borehole trajectory, and it was clear that the main controlling factor of the borehole deflection is the geological factor. This study provides a basis for obtaining the drilling deflection law and determining the appropriate drilling deflection control and correction technology.