Manish Kumar
Research Subjects
Manish Kumar has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Atul Srivastava
Indian Institute of Technology Bombay
5 shared publications - Mohd Moiz
Department of Mechanical Engineering, Indian Institute of Technology 2 , Bombay, India
5 shared publications
Latest Publications
- Open Access
- 10 March 2026
- Published by Elsevier in SSRN Electronic Journal
Mitigating diffusion limited heat transfer effects through controlled bubble departure during buoyancy-opposed nucleate pool boiling: Whole field measurements
Downward-facing pool boiling with buoyancy-opposed conditions holds importance in nuclear safety applications such as external reactor vessel cooling (ERVC). Despite extensive research, existing studies have primarily focused on film boiling, elongated vapor slug dynamics, and nucleate boiling involving multiple interacting bubbles, largely relying on high-speed visualization and providing limited insight into the associated thermal field. In the present work, a comprehensive experimental investigation of single bubble dynamics and coupled thermal transport on a downward facing heated surface is carried out using Rainbow Schlieren Deflectometry (RSD). This optical technique enables simultaneous, non-intrusive and time-resolved measurements of vapor bubble dynamics and two-dimensional temperature gradients near the heater surface and around the vapor bubble. Experiments were performed under subcooled pool conditions (ΔTsub = 3 K) at heat fluxes of 10 and 20 kW/m². Time-resolved measurements of bubble equivalent diameter, base diameter and aspect ratio are obtained to characterize bubble growth and deformation under buoyancy-opposed conditions. The reconstructed temperature and its gradient fields reveal pronounced thermal boundary layer development near the heater surface, with maximum near wall temperature gradients increasing from 15,000 °C/m at 10 kW/m² to 20,000 °C/m at 20 kW/m². Heat partitioning analysis indicates that both evaporative and condensation heat transfer components increase with heat flux, with the evaporative contribution showing an enhancement of nearly 150% at higher heat flux. Furthermore, a noticeable enhancement in the local heat transfer coefficient is observed after bubble departure compared to before bubble nucleation. The heat transfer coefficient attains higher values after the bubble leaves the heater surface due to turbulence, with average increases of approximately 9% and 13% at heat fluxes of 10 and 20 kW/m², respectively.
- 10 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMitigating diffusion limited heat transfer effects through controlled bubble departure during buoyancy-opposed nucleate pool boiling: Whole field measurements
Downward-facing pool boiling with buoyancy-opposed conditions holds importance in nuclear safety applications such as external reactor vessel cooling (ERVC). Despite extensive research, existing studies have primarily focused on film boiling, elongated vapor slug dynamics, and nucleate boiling involving multiple interacting bubbles, largely relying on high-speed visualization and providing limited insight into the associated thermal field. In the present work, a comprehensive experimental investigation of single bubble dynamics and coupled thermal transport on a downward facing heated surface is carried out using Rainbow Schlieren Deflectometry (RSD). This optical technique enables simultaneous, non-intrusive and time-resolved measurements of vapor bubble dynamics and two-dimensional temperature gradients near the heater surface and around the vapor bubble. Experiments were performed under subcooled pool conditions (ΔTsub = 3 K) at heat fluxes of 10 and 20 kW/m². Time-resolved measurements of bubble equivalent diameter, base diameter and aspect ratio are obtained to characterize bubble growth and deformation under buoyancy-opposed conditions. The reconstructed temperature and its gradient fields reveal pronounced thermal boundary layer development near the heater surface, with maximum near wall temperature gradients increasing from 15,000 °C/m at 10 kW/m² to 20,000 °C/m at 20 kW/m². Heat partitioning analysis indicates that both evaporative and condensation heat transfer components increase with heat flux, with the evaporative contribution showing an enhancement of nearly 150% at higher heat flux. Furthermore, a noticeable enhancement in the local heat transfer coefficient is observed after bubble departure compared to before bubble nucleation. The heat transfer coefficient attains higher values after the bubble leaves the heater surface due to turbulence, with average increases of approximately 9% and 13% at heat fluxes of 10 and 20 kW/m², respectively.
- Open Access
- 6 February 2026
- Published by Elsevier in SSRN Electronic Journal
On the coupled investigation of spatio-temporal thermal signatures of thin metallic substrate and vapor bubble dynamics in nucleate flow boiling regime
Flow boiling has emerged as a crucial heat transfer mechanism for advanced thermal management systems owing to its ability to combine nucleate boiling efficiency with forced convection. However, detailed understanding of localized heat transfer mechanisms, particularly the interplay between microlayer evaporation, condensation, and superheated liquid evaporation, remains limited due to the challenges of simultaneous thermal and vapor bubble dynamics measurements. In this study, a comprehensive experimental investigation of subcooled flow boiling is performed in a vertically oriented small length scale channel using a stainless-steel foil heater at a Reynolds number of 1200 and subcooling of 6 K. The experiments integrate rainbow schlieren deflectometry (RSD) and infrared (IR) thermography to simultaneously visualize bubble dynamics and capture spatiotemporal surface temperature distributions beneath the vapor bubble. The results reveal significant asymmetry in temperature and heat flux fields induced by the flow inertia, with the peak local heat flux reaching approximately 1.8 MW/m2. Detailed energy balance analysis further quantifies the individual contributions of microlayer evaporation, superheated liquid evaporation, and condensation to the total heat transfer. The findings demonstrate that microlayer evaporation remains the dominant mechanism at high heat flux levels, while condensation effects become increasingly important during the late growth phase under subcooled conditions. This integrated RSD–IR thermography approach provides new insights into the transient two-phase heat transfer mechanisms during flow boiling on metallic substrates and establishes a framework for future model validation and design optimization of high heat flux thermal systems.
- 6 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOn the coupled investigation of spatio-temporal thermal signatures of thin metallic substrate and vapor bubble dynamics in nucleate flow boiling regime
Flow boiling has emerged as a crucial heat transfer mechanism for advanced thermal management systems owing to its ability to combine nucleate boiling efficiency with forced convection. However, detailed understanding of localized heat transfer mechanisms, particularly the interplay between microlayer evaporation, condensation, and superheated liquid evaporation, remains limited due to the challenges of simultaneous thermal and vapor bubble dynamics measurements. In this study, a comprehensive experimental investigation of subcooled flow boiling is performed in a vertically oriented small length scale channel using a stainless-steel foil heater at a Reynolds number of 1200 and subcooling of 6 K. The experiments integrate rainbow schlieren deflectometry (RSD) and infrared (IR) thermography to simultaneously visualize bubble dynamics and capture spatiotemporal surface temperature distributions beneath the vapor bubble. The results reveal significant asymmetry in temperature and heat flux fields induced by the flow inertia, with the peak local heat flux reaching approximately 1.8 MW/m2. Detailed energy balance analysis further quantifies the individual contributions of microlayer evaporation, superheated liquid evaporation, and condensation to the total heat transfer. The findings demonstrate that microlayer evaporation remains the dominant mechanism at high heat flux levels, while condensation effects become increasingly important during the late growth phase under subcooled conditions. This integrated RSD–IR thermography approach provides new insights into the transient two-phase heat transfer mechanisms during flow boiling on metallic substrates and establishes a framework for future model validation and design optimization of high heat flux thermal systems.