MAMeriç Çalişkan Arslan

Meriç Çalişkan Arslan

*This is an algorithmically generated author record based on publicly available information.

Meriç Çalişkan Arslan has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Stability of Ga-doped Cz-Si solar cells under PV-module field conditions

    by Michael Winter, Yevgeniya Larionova, Verena Mertens, Özlem Coşkun, Çağrı Taha Delikanlı, Meriç Çalışkan Arslan, Thorsten Dullweber, Jan Schmidt


  • Open Access

    Industrial implementation of 24%-efficient POLO IBC solar cells and future upgrade to 26%-efficient POLO 2 IBC

    by Thorsten Dullweber, Yevgeniya Larionova, Philip Jäger, Verena Mertens, Sabrina Schimanke, Melanie Ripke, Ulrike Baumann, Alaa Osman, Udo Römer, Robby Peibst, et al.

    IBC solar cells have gained tremendous interest in the PV industry as next-generation technology. ISFH has developed a lean manufacturing process sequence for POLO IBC solar cells applying p-type Cz wafers, an Al-BSF base contact and local PECVD deposition of the SiO x N y /n-type polysilicon emitter through a glass shadow mask. In this paper, we report a new best POLO IBC cell efficiency of 24.5% processed at ISFH on M2 wafer size. In 2024, we started to transfer the POLO IBC process from the ISFH SolarTeC to the Kalyon PV manufacturing line using their M10 sized p-type Ga-doped Cz wafers and cell production tools. With Kalyon PV's wet chemistry and PECVD AlO x /SiN tools good surface passivation is demonstrated by obtaining an iV oc up to 727 mV using textured, rear side polished AlO x /SiN passivated test wafers. Kalyon PV targets to process first M10-sized POLO IBC solar cells till end of 2025. However, the POLO IBC efficiency will be limited to below 25.5% by the carrier recombination at the Al-BSF base contact. To overcome this limitation aiming at n-type poly / p-type polysilicon POLO 2 IBC cell efficiencies beyond 26%, EnPV and ISFH optimized a carrier selective SiO x /p-type polysilicon layer stack yielding a new best median saturation current density J 0 = 4 ± 1 fA/cm 2 using industrial tools for the wet chemically grown SiO x and the in-situ doped p-type polysilicon layer. ISFH is applying the SiO x /p-type polysilicon layer stack to develop a novel industrial processing sequence for the POLO 2 IBC solar cell. We deposit both polysilicon layers in-situ-doped full-area and laser-structure both polysilicon polarities. Using lab-type tools and p-type float zone (FZ) wafers, a small-area POLO 2 IBC solar cell with 25.5% efficiency has been developed at ISFH. Using M2-sized n-type Cz wafers, a novel IBC trench patterning process, and solely industrial processing tools in the ISFH SolarTeC targeting very cost-effective processes for etch barrier formation, laser structuring, and polysilicon etching, we obtain a measured implied V oc = 735 mV of POLO 2 IBC cells processed without metal contacts. Since the polysilicon contacts minimize carrier recombination at metal contacts, the implied V oc value demonstrates the high V oc potential of this promising new POLO 2 IBC manufacturing process thereby indicating a conversion efficiency potential above 26%.