Branislav Basara
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Branislav Basara has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Sinisa Krajnovic
Department of Mechanics and Maritime Sciences (M2), Chalmers University of Technology, Goteborg 41296, Sweden
3 shared publicationsGuglielmo Minelli
Department of Mechanics and Maritime Sciences (M2), Chalmers University of Technology, Goteborg 41296, Sweden
2 shared publicationsZoran Pavlovic
2 shared publicationsAVL LIST GmbH
1 shared publication- Anirudh Rao
Fluids Laboratory for Aeronautical and Industrial Research (FLAIR), Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, Victoria 3800, Australia
1 shared publication - Cameron Tropea
Technical University of Darmstadt
1 shared publication
Latest Publications
- 25 September 2026
- Published by Elsevier in International Journal of Heat and Fluid Flow
- Vol. 122
A unified wall treatment for seamless PANS simulations across all resolution levels
- 25 September 2026
- Published by Elsevier in International Journal of Heat and Fluid Flow
- Vol. 122
A unified wall treatment for seamless PANS simulations across all resolution levels
- 21 May 2026
- Published by Elsevier in International Journal of Heat and Fluid Flow
- Vol. 121
A complete resolution parameter framework for PANS enabling seamless RANS–DNS transition
- 21 May 2026
- Published by Elsevier in International Journal of Heat and Fluid Flow
- Vol. 121
A complete resolution parameter framework for PANS enabling seamless RANS–DNS transition
- Open Access
- 1 January 2018
- Published by Begell House Inc. Publishers
- p. 731-734
Influence of the numerical schemes on the flow states of a simplified heavy vehicle
Recent experiments [1, 2] in the wake of a simplified heavy vehicle (also know as a ground transportation system (GTS)) have shown that the flow topology remains invariant over a large range of Reynolds numbers [3.8 × 104−2.8 × 106]. This allows numerical techniques such as large eddy simulations (LES) to accurately predict the flow topology at low Reynolds numbers, but are computationally expensive. Hybrid RANS/LES turbulence models are an alternative choice where, accurate prediction of the flow is possible on coarser grids ([3, 4]). Numerical simulations are performed using LES and a hybrid turbulence model - partially-averaged Navier−Stokes (PANS) equations at ReH = 3.8 × 104 for a unified tractor-trailer geometry to compare the flow topologies in the near wake. The influence of the numerical schemes on the flow topology in the symmetry plane which is susceptible to bi-stable flow is investigated using PANS, with the results from LES as a baseline for comparison.
- 1 January 2018
- Published by Begell House Inc. Publishers
- p. 731-734
Open AccessInfluence of the numerical schemes on the flow states of a simplified heavy vehicle
Recent experiments [1, 2] in the wake of a simplified heavy vehicle (also know as a ground transportation system (GTS)) have shown that the flow topology remains invariant over a large range of Reynolds numbers [3.8 × 104−2.8 × 106]. This allows numerical techniques such as large eddy simulations (LES) to accurately predict the flow topology at low Reynolds numbers, but are computationally expensive. Hybrid RANS/LES turbulence models are an alternative choice where, accurate prediction of the flow is possible on coarser grids ([3, 4]). Numerical simulations are performed using LES and a hybrid turbulence model - partially-averaged Navier−Stokes (PANS) equations at ReH = 3.8 × 104 for a unified tractor-trailer geometry to compare the flow topologies in the near wake. The influence of the numerical schemes on the flow topology in the symmetry plane which is susceptible to bi-stable flow is investigated using PANS, with the results from LES as a baseline for comparison.
- 1 January 2018
- Published by Begell House Inc. Publishers
- p. 245-248
SCALE-RESOLVING SIMULATIONS OF THE FLOW IN INTERNAL COMBUSTION ENGINES
This paper presents calculations of engine flows by using the variable resolution method, known as Partially-Averaged Navier-Stokes (PANS) model. This turbulence bridging method, which supports any filter width or scale resolution, is derived from the Reynolds-Averaged Navier-Stokes (RANS) model equations. It inevitably improves results when compared with its corresponding RANS model if more scales of motions are resolved. This is done by varying the unresolved-to-total ratios of kinetic energy and dissipation. This method, which is presently very much in use for non-moving geometries, especially for external car aerodynamics, is here further extended in order to improve its performance for the engine simulations. An efficient use of the PANS method relies on a definition and calculations of resolution parameters. In the standard approach, the integral scale of turbulence is obtained by using resolved turbulence calculated as difference between instantaneous filtered velocity and the averaged velocity field. Such approach is impractical for cases with moving geometries or with transient boundaries and especially for calculations of engines due to a long cycle-to-cycle averaging in order to supply the optimum resolution parameter. This paper deals with an alternative approach which solves the additional resolved kinetic energy equation (modelled scale-supplying equation) that also takes into account a recently proposed model for the dissipation resolution parameter. Simulations of the real engine case including the spray and combustion calculations will be presented.
- 1 January 2018
- Published by Begell House Inc. Publishers
- p. 245-248
SCALE-RESOLVING SIMULATIONS OF THE FLOW IN INTERNAL COMBUSTION ENGINES
This paper presents calculations of engine flows by using the variable resolution method, known as Partially-Averaged Navier-Stokes (PANS) model. This turbulence bridging method, which supports any filter width or scale resolution, is derived from the Reynolds-Averaged Navier-Stokes (RANS) model equations. It inevitably improves results when compared with its corresponding RANS model if more scales of motions are resolved. This is done by varying the unresolved-to-total ratios of kinetic energy and dissipation. This method, which is presently very much in use for non-moving geometries, especially for external car aerodynamics, is here further extended in order to improve its performance for the engine simulations. An efficient use of the PANS method relies on a definition and calculations of resolution parameters. In the standard approach, the integral scale of turbulence is obtained by using resolved turbulence calculated as difference between instantaneous filtered velocity and the averaged velocity field. Such approach is impractical for cases with moving geometries or with transient boundaries and especially for calculations of engines due to a long cycle-to-cycle averaging in order to supply the optimum resolution parameter. This paper deals with an alternative approach which solves the additional resolved kinetic energy equation (modelled scale-supplying equation) that also takes into account a recently proposed model for the dissipation resolution parameter. Simulations of the real engine case including the spray and combustion calculations will be presented.
- Open Access
- 1 January 2015
- Published by Begell House Inc. Publishers
- p. 723-726
Actuation of the flow field around a frontstep with a rounded leading edge
Large Eddy Simulations (LES) are conducted to study the actuated flow field around a bluff body. The model is a simplification of a section of a truck cabin. The aim is to model the separation of the flow acting at the front part, the so called A-pillar. LES data show the connection between orientation and frequency of the actuation in comparison with drag reduction and separation mechanism. The flow is post processed using modal and frequency decompositions. Relevant results in terms of drag coefficient reduction were observed for the actuated flow. An optimal actuation in terms of induced frequency and drag reduction is also found.
- 1 January 2015
- Published by Begell House Inc. Publishers
- p. 723-726
Open AccessActuation of the flow field around a frontstep with a rounded leading edge
Large Eddy Simulations (LES) are conducted to study the actuated flow field around a bluff body. The model is a simplification of a section of a truck cabin. The aim is to model the separation of the flow acting at the front part, the so called A-pillar. LES data show the connection between orientation and frequency of the actuation in comparison with drag reduction and separation mechanism. The flow is post processed using modal and frequency decompositions. Relevant results in terms of drag coefficient reduction were observed for the actuated flow. An optimal actuation in terms of induced frequency and drag reduction is also found.
- 1 April 2014
- Published by SAE International in SAE International Journal of Passenger Cars - Mechanical Systems
- Vol. 07 (2) , 559-574
Computational Study of the Aerodynamics of a Realistic Car Model by Means of RANS and Hybrid RANS/LES Approaches
The aerodynamic properties of a BMW car model, representing a 40%-scaled model of a relevant car configuration, are studied computationally by means of the Unsteady RANS (Reynolds-Averaged Navier-Stokes) and Hybrid RANS/LES (Large-Eddy Simulation) approaches. The reference database (geometry, operating parameters and surface pressure distribution) are adopted from an experimental investigation carried out in the wind tunnel of the BMW Group in Munich (Schrefl, 2008). The present computational study focuses on validation of some recently developed turbulence models for unsteady flow computations in conjunction with the universal wall treatment combining integration up to the wall and high Reynolds number wall functions in such complex flow situations. The turbulence model adopted in both Unsteady RANS and PANS (Partially-Averaged Navier Stokes) frameworks is the four-equation ζ − f formulation of Hanjalic et al. (2004) based on the Elliptic Relaxation Concept (Durbin, 1991). The latter model mimics the sub-scale model in the PANS method representing a hybrid RANS/LES strategy, proposed recently by Basara et al. (2011). Herewith a seamless transition from Unsteady RANS to the direct numerical simulation (DNS) is provided as the unresolved-to-total ratios of kinetic energy and its dissipation are varied throughout the flow domain. As a result of simulations the three-dimensional wall-pressure distribution, detailed mean flow and turbulence fields are obtained and analyzed along with experimental findings, thus enabling the study of the aerodynamic properties of this ground vehicle including also the unsteady flow phenomena in the car wake.
- 1 April 2014
- Published by SAE International in SAE International Journal of Passenger Cars - Mechanical Systems
- Vol. 07 (2) , 559-574
Computational Study of the Aerodynamics of a Realistic Car Model by Means of RANS and Hybrid RANS/LES Approaches
The aerodynamic properties of a BMW car model, representing a 40%-scaled model of a relevant car configuration, are studied computationally by means of the Unsteady RANS (Reynolds-Averaged Navier-Stokes) and Hybrid RANS/LES (Large-Eddy Simulation) approaches. The reference database (geometry, operating parameters and surface pressure distribution) are adopted from an experimental investigation carried out in the wind tunnel of the BMW Group in Munich (Schrefl, 2008). The present computational study focuses on validation of some recently developed turbulence models for unsteady flow computations in conjunction with the universal wall treatment combining integration up to the wall and high Reynolds number wall functions in such complex flow situations. The turbulence model adopted in both Unsteady RANS and PANS (Partially-Averaged Navier Stokes) frameworks is the four-equation ζ − f formulation of Hanjalic et al. (2004) based on the Elliptic Relaxation Concept (Durbin, 1991). The latter model mimics the sub-scale model in the PANS method representing a hybrid RANS/LES strategy, proposed recently by Basara et al. (2011). Herewith a seamless transition from Unsteady RANS to the direct numerical simulation (DNS) is provided as the unresolved-to-total ratios of kinetic energy and its dissipation are varied throughout the flow domain. As a result of simulations the three-dimensional wall-pressure distribution, detailed mean flow and turbulence fields are obtained and analyzed along with experimental findings, thus enabling the study of the aerodynamic properties of this ground vehicle including also the unsteady flow phenomena in the car wake.