Junhong Jia
Junhong Jia has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Chunning Gao
Research Institute of Exploration and Development, Changqing Oilfield Company, Petro China, Xi’an 710021, China
3 shared publications - Ke Wu
Research Institute of Exploration and Development, PetroChina Changqing Oilfield Company, Xi’an 710018, China
3 shared publications - Yangnan Shangguan
Exploration and Development Research Institute of PetroChina Changqing Oilfield Company, Xi’an 710018, China
3 shared publications - Guo-Wei Yuan
Exploration and Development Research Institute of PetroChina Changqing Oilfield Company
2 shared publications - Hengye Liu
Key Laboratory of Enhanced Oil Recovery, Northeast Petroleum University, Ministry of Education, Daqing 163318, China
2 shared publications - Huilin Wang
Research Institute of Exploration and Development, Changqing Oilfield Company, PetroChina, Xi’an 710018, China
2 shared publications
Latest Publications
- Open Access
Experimental Study on Oxygen-Reduced Air Foam Flooding in Ultra-Low-Permeability Reservoirs: From Sensitivity Analysis and Decomposition of Oil Recovery to Pore-Scale Seepage Mechanisms
Mature domestic continental low-permeability oil reservoirs in China have generally entered the ultra-high water-cut and high-recovery stage. Complex reservoir heterogeneity, development characteristics prone to gas channeling, and unclear seepage mechanisms of air foam flooding present engineering challenges to efficient development. To address these issues, this study investigates oxygen-reduced air foam flooding in the Chang-6 ultra-low-permeability sandstone reservoir in the WY block of Changqing Oilfield. The microscopic pore network was characterized using high-pressure mercury intrusion, BET (Brunauer-Emmett-Teller) nitrogen adsorption, and scanning electron microscopy. Changes in reservoir and fluid physicochemical characteristics before and after development were evaluated using the sessile drop method, pendant drop method, and Wilhelmy plate method. Core-flooding experiments were performed to confirm preferred key injection parameters, quantitatively decompose individual enhanced oil recovery mechanisms, and verify pore-scale seepage mechanisms via online nuclear magnetic resonance. The results reveal multi-scale pore network characteristics of the target reservoir and confirm the significant reduction in oil–water interfacial tension during foam flooding. Parameter sensitivity analysis identifies preferred operating conditions within the investigated experimental range, including an injection velocity of 0.2–0.3 mL/min, a foaming-agent concentration of 0.4–0.5%, a gas-to-liquid ratio of 2:1, and a 5-cycle slug schedule. Oil recovery decomposition analysis indicates that ultimate oil recovery comprises a relative share of 77.63% from baseline waterflooding, 13.44% from surfactant-assisted oil mobilization, 6.45% from gas assistance, and 2.48% from physical foam plugging. Furthermore, online nuclear magnetic resonance T2 (Transverse relaxation time) spectrum analysis reveals distinct permeability-dependent air foam flow regimes: as permeability decreases, flow behavior transitions from smooth foam propagation with concurrent oil washing and plugging, to the formation of dynamic foam plugging, and finally to severe shear-induced foam destruction in narrow throats that causes air foam flooding to fail. This study provides preferred injection parameters and theoretical grounds for mechanism decomposition in air foam enhanced oil recovery for ultra-low-permeability reservoirs, offering key insights into air foam seepage behavior.
Open AccessExperimental Study on Oxygen-Reduced Air Foam Flooding in Ultra-Low-Permeability Reservoirs: From Sensitivity Analysis and Decomposition of Oil Recovery to Pore-Scale Seepage Mechanisms
Mature domestic continental low-permeability oil reservoirs in China have generally entered the ultra-high water-cut and high-recovery stage. Complex reservoir heterogeneity, development characteristics prone to gas channeling, and unclear seepage mechanisms of air foam flooding present engineering challenges to efficient development. To address these issues, this study investigates oxygen-reduced air foam flooding in the Chang-6 ultra-low-permeability sandstone reservoir in the WY block of Changqing Oilfield. The microscopic pore network was characterized using high-pressure mercury intrusion, BET (Brunauer-Emmett-Teller) nitrogen adsorption, and scanning electron microscopy. Changes in reservoir and fluid physicochemical characteristics before and after development were evaluated using the sessile drop method, pendant drop method, and Wilhelmy plate method. Core-flooding experiments were performed to confirm preferred key injection parameters, quantitatively decompose individual enhanced oil recovery mechanisms, and verify pore-scale seepage mechanisms via online nuclear magnetic resonance. The results reveal multi-scale pore network characteristics of the target reservoir and confirm the significant reduction in oil–water interfacial tension during foam flooding. Parameter sensitivity analysis identifies preferred operating conditions within the investigated experimental range, including an injection velocity of 0.2–0.3 mL/min, a foaming-agent concentration of 0.4–0.5%, a gas-to-liquid ratio of 2:1, and a 5-cycle slug schedule. Oil recovery decomposition analysis indicates that ultimate oil recovery comprises a relative share of 77.63% from baseline waterflooding, 13.44% from surfactant-assisted oil mobilization, 6.45% from gas assistance, and 2.48% from physical foam plugging. Furthermore, online nuclear magnetic resonance T2 (Transverse relaxation time) spectrum analysis reveals distinct permeability-dependent air foam flow regimes: as permeability decreases, flow behavior transitions from smooth foam propagation with concurrent oil washing and plugging, to the formation of dynamic foam plugging, and finally to severe shear-induced foam destruction in narrow throats that causes air foam flooding to fail. This study provides preferred injection parameters and theoretical grounds for mechanism decomposition in air foam enhanced oil recovery for ultra-low-permeability reservoirs, offering key insights into air foam seepage behavior.
- Open Access
Research on Control Factors and Parameter Optimization of Surfactant Flooding in Low-Permeability Reservoirs Using Random Forest Algorithm
As oil and gas development increasingly targets low and ultra-low permeability reservoirs, conventional recovery techniques often prove insufficient for mobilizing residual oil. Surfactant flooding, a key chemical enhanced oil recovery (EOR) technology, thus requires careful system optimization and mechanistic investigation. This study focuses on low-permeability reservoirs in the Changqing Oilfield, evaluating three surfactant systems—YHS-Z1 (a 7:3 mass ratio blend of hydroxypropyl sulfobetaine and cocamide), YHS-Z2 (a polyether carboxylate, a nonionic-anionic composite) and a middle-phase microemulsion system (Heavy alkylbenzene sulfonate and hydroxysulfobetaine were combined with a mass ratio of 7:3)—through a series of experiments including interfacial tension measurement, contact angle analysis, static and dynamic oil displacement tests, as well as emulsion transport/retention index assessments, to comprehensively characterize their oil displacement properties. Based on the experimental data, this study constructed four classical regression models: Ridge Regression, Random Forest (RF), Gradient Boosting Regression (GBR), and Support Vector Regression (SVR), and conducted a comparative analysis of their predictive performance. The results demonstrate that the Random Forest (RF) model achieved the optimal prediction performance, with a Mean Absolute Error (MAE) of 1.8245, a Mean Absolute Percentage Error (MAPE) of 4.78%, and a coefficient of determination (R2) of 0.9428 on the training set. Further analysis using the SHapley Additive exPlanations (SHAP) algorithm revealed that the retention index is the primary global factor (accounting for 49.79% of the variance), while significant intergroup differences exist in the primary factors across different surfactant systems. Concurrently, single-factor and multi-factor sensitivity analyses were conducted to elucidate synergistic effects and threshold behaviors among parameters. The optimal parameter combination, identified via a random search method, achieved a predicted recovery factor of 45.61%, representing a 6.57% improvement over the highest experimental value. This study demonstrates that machine learning methods can effectively identify the dominant factors in oil displacement and enable synergistic parameter optimization, thereby providing a theoretical foundation for the efficient development of surfactant flooding in low-permeability reservoirs.
Open AccessResearch on Control Factors and Parameter Optimization of Surfactant Flooding in Low-Permeability Reservoirs Using Random Forest Algorithm
As oil and gas development increasingly targets low and ultra-low permeability reservoirs, conventional recovery techniques often prove insufficient for mobilizing residual oil. Surfactant flooding, a key chemical enhanced oil recovery (EOR) technology, thus requires careful system optimization and mechanistic investigation. This study focuses on low-permeability reservoirs in the Changqing Oilfield, evaluating three surfactant systems—YHS-Z1 (a 7:3 mass ratio blend of hydroxypropyl sulfobetaine and cocamide), YHS-Z2 (a polyether carboxylate, a nonionic-anionic composite) and a middle-phase microemulsion system (Heavy alkylbenzene sulfonate and hydroxysulfobetaine were combined with a mass ratio of 7:3)—through a series of experiments including interfacial tension measurement, contact angle analysis, static and dynamic oil displacement tests, as well as emulsion transport/retention index assessments, to comprehensively characterize their oil displacement properties. Based on the experimental data, this study constructed four classical regression models: Ridge Regression, Random Forest (RF), Gradient Boosting Regression (GBR), and Support Vector Regression (SVR), and conducted a comparative analysis of their predictive performance. The results demonstrate that the Random Forest (RF) model achieved the optimal prediction performance, with a Mean Absolute Error (MAE) of 1.8245, a Mean Absolute Percentage Error (MAPE) of 4.78%, and a coefficient of determination (R2) of 0.9428 on the training set. Further analysis using the SHapley Additive exPlanations (SHAP) algorithm revealed that the retention index is the primary global factor (accounting for 49.79% of the variance), while significant intergroup differences exist in the primary factors across different surfactant systems. Concurrently, single-factor and multi-factor sensitivity analyses were conducted to elucidate synergistic effects and threshold behaviors among parameters. The optimal parameter combination, identified via a random search method, achieved a predicted recovery factor of 45.61%, representing a 6.57% improvement over the highest experimental value. This study demonstrates that machine learning methods can effectively identify the dominant factors in oil displacement and enable synergistic parameter optimization, thereby providing a theoretical foundation for the efficient development of surfactant flooding in low-permeability reservoirs.
- Open Access
- 27 January 2026
- Published by MDPI AG in Preprints.org
Research on Control Factors and Parameter Optimization of Surfactant Flooding in Low-Permeability Reservoirs Using Random Forest Algorithm
As oil and gas development increasingly targets low and ultra-low permeability reservoirs, conventional recovery techniques often prove insufficient for mobilizing residual oil. Surfactant flooding, a key chemical enhanced oil recovery (EOR) technology, thus requires careful system optimization and mechanistic investigation. This study focuses on low-permeability reservoirs in the Changqing Oilfield, evaluating three surfactant systems—YHS-Z1 (a 7:3 mass ratio blend of hydroxypropyl sulfobetaine and cocamide, YHS-Z2 (a polyether carboxylate, a nonionic-anionic composite) and a middle-phase microemulsion system (Heavy alkylbenzene sulfonate and hydroxysulfobetaine were combined with a mass ratio of 7:3)—through a series of experiments including interfacial tension measurement, contact angle analysis, static and dynamic oil displacement tests, as well as emulsion transport/retention index assessments, to comprehensively characterize their oil displacement properties. Based on the experimental data, five machine learning models—Linear Regression, Support Vector Regression, XGBoost, Gradient Boosting Regression, and Random Forest—were constructed and comparatively analyzed for their predictive performance. The results demonstrate that the Random Forest (RF) model achieved the optimal prediction performance (MAE = 2.8007%, MAPE = 7.4107%, R² = 0.0454). Further analysis using the SHAP algorithm revealed that the retention index is the primary global factor (accounting for 49.79% of the variance), while significant intergroup differences exist in the primary factors across different surfactant systems. Concurrently, single-factor and multi-factor sensitivity analyses were conducted to elucidate synergistic effects and threshold behaviors among parameters. The optimal parameter combination, identified via a random search method, achieved a predicted recovery ratio of 45.61%, representing a 6.57% improvement over the highest experimental value. This study demonstrates that machine learning methods can effectively identify the dominant factors in oil displacement and enable synergistic parameter optimization, thereby providing a theoretical foundation for the efficient development of surfactant flooding in low-permeability reservoirs.
- 27 January 2026
- Published by MDPI AG in Preprints.org
Open AccessResearch on Control Factors and Parameter Optimization of Surfactant Flooding in Low-Permeability Reservoirs Using Random Forest Algorithm
As oil and gas development increasingly targets low and ultra-low permeability reservoirs, conventional recovery techniques often prove insufficient for mobilizing residual oil. Surfactant flooding, a key chemical enhanced oil recovery (EOR) technology, thus requires careful system optimization and mechanistic investigation. This study focuses on low-permeability reservoirs in the Changqing Oilfield, evaluating three surfactant systems—YHS-Z1 (a 7:3 mass ratio blend of hydroxypropyl sulfobetaine and cocamide, YHS-Z2 (a polyether carboxylate, a nonionic-anionic composite) and a middle-phase microemulsion system (Heavy alkylbenzene sulfonate and hydroxysulfobetaine were combined with a mass ratio of 7:3)—through a series of experiments including interfacial tension measurement, contact angle analysis, static and dynamic oil displacement tests, as well as emulsion transport/retention index assessments, to comprehensively characterize their oil displacement properties. Based on the experimental data, five machine learning models—Linear Regression, Support Vector Regression, XGBoost, Gradient Boosting Regression, and Random Forest—were constructed and comparatively analyzed for their predictive performance. The results demonstrate that the Random Forest (RF) model achieved the optimal prediction performance (MAE = 2.8007%, MAPE = 7.4107%, R² = 0.0454). Further analysis using the SHAP algorithm revealed that the retention index is the primary global factor (accounting for 49.79% of the variance), while significant intergroup differences exist in the primary factors across different surfactant systems. Concurrently, single-factor and multi-factor sensitivity analyses were conducted to elucidate synergistic effects and threshold behaviors among parameters. The optimal parameter combination, identified via a random search method, achieved a predicted recovery ratio of 45.61%, representing a 6.57% improvement over the highest experimental value. This study demonstrates that machine learning methods can effectively identify the dominant factors in oil displacement and enable synergistic parameter optimization, thereby providing a theoretical foundation for the efficient development of surfactant flooding in low-permeability reservoirs.
- Open Access
- 10 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (24) , 13005
Enhancing Extrapolation of Buckley–Leverett Solutions with Physics-Informed and Transfer-Learned Fourier Neural Operators
Accurate modeling of multiphase flow in porous media remains challenging due to the nonlinear transport and sharp displacement fronts described by the Buckley–Leverett (B-L) equation. Although Fourier Neural Operators (FNOs) have recently emerged as powerful surrogates for parametric partial differential equations, they exhibit limited robustness when extrapolating beyond the training regime, particularly for shock-dominated fractional flows. This study aims to enhance the extrapolative performance of FNOs for one-dimensional B-L displacement. Analytical solutions were generated using Welge’s graphical method, and datasets were constructed across a range of mobility ratios. A baseline FNO was trained to predict water saturation profiles and evaluated under both interpolation and extrapolation conditions. While the standard FNO accurately reconstructs saturation profiles within the training window, it misestimates shock positions and saturation jumps when extended to longer times or higher mobility ratios. To address these limitations, we develop Physics-Informed FNOs (PI-FNOs), which embed PDE residuals and boundary constraints, and Transfer-Learned FNOs (TL-FNOs), which adapt pretrained operators to new regimes using limited data. Comparative analyses show that both approaches markedly improve extrapolation accuracy, with PI-FNOs achieving the most consistent and physically reliable performance. These findings demonstrate the potential of combining physics constraints and knowledge transfer for robust operator learning in multiphase flow systems.
- 10 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (24) , 13005
Open AccessEnhancing Extrapolation of Buckley–Leverett Solutions with Physics-Informed and Transfer-Learned Fourier Neural Operators
Accurate modeling of multiphase flow in porous media remains challenging due to the nonlinear transport and sharp displacement fronts described by the Buckley–Leverett (B-L) equation. Although Fourier Neural Operators (FNOs) have recently emerged as powerful surrogates for parametric partial differential equations, they exhibit limited robustness when extrapolating beyond the training regime, particularly for shock-dominated fractional flows. This study aims to enhance the extrapolative performance of FNOs for one-dimensional B-L displacement. Analytical solutions were generated using Welge’s graphical method, and datasets were constructed across a range of mobility ratios. A baseline FNO was trained to predict water saturation profiles and evaluated under both interpolation and extrapolation conditions. While the standard FNO accurately reconstructs saturation profiles within the training window, it misestimates shock positions and saturation jumps when extended to longer times or higher mobility ratios. To address these limitations, we develop Physics-Informed FNOs (PI-FNOs), which embed PDE residuals and boundary constraints, and Transfer-Learned FNOs (TL-FNOs), which adapt pretrained operators to new regimes using limited data. Comparative analyses show that both approaches markedly improve extrapolation accuracy, with PI-FNOs achieving the most consistent and physically reliable performance. These findings demonstrate the potential of combining physics constraints and knowledge transfer for robust operator learning in multiphase flow systems.