Ellappan Satheeshkumar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ellappan Satheeshkumar has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Muthukaruppan Alagar
Centre for Advanced Materials PSG College of Arts and Science Coimbatore India
2 shared publications G. Logesh
1 shared publication- Harinei Srinivasan
Centre for Advanced Materials PSG College of Arts & Science Coimbatore India
1 shared publication K. Ilango
1 shared publication- Khajanajimudeen Mohamed Mydeen
Centre for Advanced Materials PSG College of Arts & Science Coimbatore India
1 shared publication M. Alagar
1 shared publication
Latest Publications
- 28 August 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (42) , e71432
Studies on Lanthanum Strontium Manganite ( LSM ) Particle Reinforced Polybenzoxazine/Epoxy Hybrid Composites
In this work, lanthanum strontium manganite (LSM)‐reinforced polybenzoxazine (PBZ) and PBZ/epoxy hybrid composites have been developed with enhanced thermal, mechanical, dielectric, and flame‐retardant performance. LSM particles was synthesized via a microwave combustion method followed by surface‐functionalization using 3‐glycidyloxypropyltrimethoxysilane (GPTMS). The functionalized LSM was incorporated into bisphenol‐F and aniline based benzoxazine (BF‐a) and BF‐a/Bisphenol‐F epoxy (DGEBF) (50/50) blends followed by thermal curing to obtain composites. An incorporation of LSM improved thermal stability, with the initial degradation temperature (T 5 %) of poly(BF‐a) increased to 383°C from 346°C and the value of char yield to 59.1% from 42.8%. The heat resistance index (HRI) increased from 205°C to 224°C, while the limiting oxygen index (LOI) increased from 34.6 to 41.1. The value of tensile strength increased up to 116 ± 3 MPa for PBZ/DGEBF composites. Shore D hardness increased from 81 ± 2 to 95 ± 1.5, while the coefficient of thermal expansion decreased from 52.5 × 10 −6 °C −1 to 37.7 × 10 −6 °C −1 , indicating enhanced dimensional stability. Dielectric analysis indicated an increase in dielectric constant from 3.50 to 5.61 for poly(BF‐a) composites and from 3.90 to 7.35 for PBZ/DGEBF composites at 10 wt% LSM loading, while maintaining low dielectric loss (0.002–0.019).
- 28 August 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (42) , e71432
Studies on Lanthanum Strontium Manganite ( LSM ) Particle Reinforced Polybenzoxazine/Epoxy Hybrid Composites
In this work, lanthanum strontium manganite (LSM)‐reinforced polybenzoxazine (PBZ) and PBZ/epoxy hybrid composites have been developed with enhanced thermal, mechanical, dielectric, and flame‐retardant performance. LSM particles was synthesized via a microwave combustion method followed by surface‐functionalization using 3‐glycidyloxypropyltrimethoxysilane (GPTMS). The functionalized LSM was incorporated into bisphenol‐F and aniline based benzoxazine (BF‐a) and BF‐a/Bisphenol‐F epoxy (DGEBF) (50/50) blends followed by thermal curing to obtain composites. An incorporation of LSM improved thermal stability, with the initial degradation temperature (T 5 %) of poly(BF‐a) increased to 383°C from 346°C and the value of char yield to 59.1% from 42.8%. The heat resistance index (HRI) increased from 205°C to 224°C, while the limiting oxygen index (LOI) increased from 34.6 to 41.1. The value of tensile strength increased up to 116 ± 3 MPa for PBZ/DGEBF composites. Shore D hardness increased from 81 ± 2 to 95 ± 1.5, while the coefficient of thermal expansion decreased from 52.5 × 10 −6 °C −1 to 37.7 × 10 −6 °C −1 , indicating enhanced dimensional stability. Dielectric analysis indicated an increase in dielectric constant from 3.50 to 5.61 for poly(BF‐a) composites and from 3.90 to 7.35 for PBZ/DGEBF composites at 10 wt% LSM loading, while maintaining low dielectric loss (0.002–0.019).
- 21 July 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (19) , 17737-17751
Zirconia Hybrid Oxides Reinforced Bio‐Based Benzoxazine/Epoxy Composites for Thermal, High Dielectric and Superhydrophobic Applications
The non‐sustainability of conventional benzoxazine and epoxy resins is highly concerning and the development of suitable bio‐alternative materials is very much warranted without compromising the end properties. Considering the preceding fact, the present study reports the synthesis of bio‐based tetrafunctional benzoxazine (T‐f) and epoxy (T‐e) blends to attain a highly thermally stable hybrid polymer system. Upon blending T‐e with T‐f, the curing temperature is reduced from 225°C to 175°C. Also, the prepared epoxy resin shows a curing temperature of 230°C. The blend shows excellent thermal stability with a char yield of 59%. Also, two ceramic‐based fillers were prepared and reinforced into the blend. The thermal stability of the composites was increased remarkably with a char yield up to 70%. Also, the dielectric constant of the composites was increased to 6.54 at 10 MHz. The ceramic composites show superhydrophobic behavior with a water contact angle reaching up to 161°.
- 21 July 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (19) , 17737-17751
Zirconia Hybrid Oxides Reinforced Bio‐Based Benzoxazine/Epoxy Composites for Thermal, High Dielectric and Superhydrophobic Applications
The non‐sustainability of conventional benzoxazine and epoxy resins is highly concerning and the development of suitable bio‐alternative materials is very much warranted without compromising the end properties. Considering the preceding fact, the present study reports the synthesis of bio‐based tetrafunctional benzoxazine (T‐f) and epoxy (T‐e) blends to attain a highly thermally stable hybrid polymer system. Upon blending T‐e with T‐f, the curing temperature is reduced from 225°C to 175°C. Also, the prepared epoxy resin shows a curing temperature of 230°C. The blend shows excellent thermal stability with a char yield of 59%. Also, two ceramic‐based fillers were prepared and reinforced into the blend. The thermal stability of the composites was increased remarkably with a char yield up to 70%. Also, the dielectric constant of the composites was increased to 6.54 at 10 MHz. The ceramic composites show superhydrophobic behavior with a water contact angle reaching up to 161°.
- 20 December 2025
- Published by Elsevier in Ceramics International
- Vol. 52 (5) , 5513-5526
Rapid microwave assisted synthesis of YSZ solid electrolytes: Impact of ZnO doping on sintering process and electrical properties
- 20 December 2025
- Published by Elsevier in Ceramics International
- Vol. 52 (5) , 5513-5526
Rapid microwave assisted synthesis of YSZ solid electrolytes: Impact of ZnO doping on sintering process and electrical properties