R.A. Malek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
R.A. Malek has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Salmie Suhana Che Abdullah
Universiti Malaysia Perlis (UniMAP), Faculty of Chemical Engineering & Technology, Taman Muhibbah, 02600 Jejawi, Perlis, Malaysia; Center of Excellent Frontier Materials Research, 01000 Seriab, Perlis, Malaysia
2 shared publications - Siti Hawa Salleh
Universiti Malaysia Perlis (UniMAP), Faculty of Chemical Engineering & Technology, Taman Muhibbah, 02600 Jejawi, Perlis, Malaysia; Center of Excellent Geopolymer and Green Technology, Taman Muhibbah, 02600 Jejawi, Perlis, Malaysia
2 shared publications A. Khantachawana
King Mongkut’s University of Technology, Faculty of Engineering, Biological Engineering Program , Thonbu ri, Bangkok 10140, Thailand
1 shared publication- Boonlom Thavornyutikarn
Biofunctional Materials and Devices Research Group, National Metal and Materials Technology Center Pathum Thani Thailand
1 shared publication - E.CH. Chee Yu
Universiti Malaysia Perlis (UniMAP), Faculty of Chemical Engineering & Technology, 02600 Arau, Perlis, Malaysia
1 shared publication - I.H. Wan Nordin
Universiti Malaysia Perlis (UniMAP), Faculty of Mechanical Engineering & Technology, Kampus Tetap Pauh Putra, 02600 Arau, Perlis, Malaysia
1 shared publication
Latest Publications
- Open Access
- 22 June 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 71 (2) , 473-480
Thermal Resilience of Eco-Binary Mortar: an Experimental Study of High-Temperature Exposure
Mortar exposed to high temperatures can experience significant degradation in strength and durability. One potential solution is replacing cement with alternative pozzolanic materials, such as Rice Husk Ash (RHA), which has a high silica content when processed under controlled burning conditions. This study investigates the use of RHA as a partial replacement in mortar, with additions ranging from 5 to 20 wt.%. As the amount of RHA increased, the mortar color darkened to a grayish shade. Surprisingly, the inclusion of 5 wt.% RHA resulted in almost double the compressive strength compared to conventional mortar, while 10 and 15 wt.% additions also showed improved performance. However, the addition of 20 wt.% RHA led to a decrease in compressive strength to 12.49 MPa, below that of standard mortar. High-temperature exposure (up to 1,093°C) affected the moisture content of the cement paste, changing its appearance to a whitish-gray color and impacting its mechanical properties. The relative strength values for all samples ranged between 0.35 and 0.16. Thermal analysis showed that free water evaporated between 82 to 140°C, followed by the decomposition of Ca(OH)2 at 445 to 454°C. The results suggest that 5 wt.% RHA provides optimal properties compared to other mixtures. This study highlights that RHA, as a low-cost agricultural waste, can be effectively utilized in the mortar industry, offering an environmentally friendly solution to both waste disposal and sustainability issues.
- 22 June 2026
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 71 (2) , 473-480
Open AccessThermal Resilience of Eco-Binary Mortar: an Experimental Study of High-Temperature Exposure
Mortar exposed to high temperatures can experience significant degradation in strength and durability. One potential solution is replacing cement with alternative pozzolanic materials, such as Rice Husk Ash (RHA), which has a high silica content when processed under controlled burning conditions. This study investigates the use of RHA as a partial replacement in mortar, with additions ranging from 5 to 20 wt.%. As the amount of RHA increased, the mortar color darkened to a grayish shade. Surprisingly, the inclusion of 5 wt.% RHA resulted in almost double the compressive strength compared to conventional mortar, while 10 and 15 wt.% additions also showed improved performance. However, the addition of 20 wt.% RHA led to a decrease in compressive strength to 12.49 MPa, below that of standard mortar. High-temperature exposure (up to 1,093°C) affected the moisture content of the cement paste, changing its appearance to a whitish-gray color and impacting its mechanical properties. The relative strength values for all samples ranged between 0.35 and 0.16. Thermal analysis showed that free water evaporated between 82 to 140°C, followed by the decomposition of Ca(OH)2 at 445 to 454°C. The results suggest that 5 wt.% RHA provides optimal properties compared to other mixtures. This study highlights that RHA, as a low-cost agricultural waste, can be effectively utilized in the mortar industry, offering an environmentally friendly solution to both waste disposal and sustainability issues.
- 22 December 2025
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- p. 1653
Enhancing Samarium-Doped Ceria Electrolytes with Manganese for Solid Oxide Fuel Cell
This study focuses on synthesizing new electrolyte materials for solid oxide fuel cell (SOFC) with the composition of Ce0.8-x MnxSm0.2O1.9-δ (x = 0, 0.025, 0.05, 0.1). The main aim is to investigate the effect of varying molar concentrations of manganese (Mn) as a secondary dopant on density, phase composition, and ionic conductivity of samarium-doped ceria (SDC). Accordingly, X-ray diffraction (XRD) and impedance spectroscopy (IS) were employed to characterize the samples. Mn-doped samples sintered at 1400°C for 5 hours exhibited a single-phase cubic fluorite structure with larger lattice parameters and volumes compared to the undoped sample. All samples achieved a high relative density exceeding 94%. Notably, the sample with 10 mol% Mn reached a relative density of 99.6%. Impedance data revealed that the ionic conductivity of the Mn-doped samples was enhanced by an order of magnitude compared to the undoped samples. This indicates that Mn is a promising dopant for SDC in electrolyte applications for SOFCs.
- 22 December 2025
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- p. 1653
Enhancing Samarium-Doped Ceria Electrolytes with Manganese for Solid Oxide Fuel Cell
This study focuses on synthesizing new electrolyte materials for solid oxide fuel cell (SOFC) with the composition of Ce0.8-x MnxSm0.2O1.9-δ (x = 0, 0.025, 0.05, 0.1). The main aim is to investigate the effect of varying molar concentrations of manganese (Mn) as a secondary dopant on density, phase composition, and ionic conductivity of samarium-doped ceria (SDC). Accordingly, X-ray diffraction (XRD) and impedance spectroscopy (IS) were employed to characterize the samples. Mn-doped samples sintered at 1400°C for 5 hours exhibited a single-phase cubic fluorite structure with larger lattice parameters and volumes compared to the undoped sample. All samples achieved a high relative density exceeding 94%. Notably, the sample with 10 mol% Mn reached a relative density of 99.6%. Impedance data revealed that the ionic conductivity of the Mn-doped samples was enhanced by an order of magnitude compared to the undoped samples. This indicates that Mn is a promising dopant for SDC in electrolyte applications for SOFCs.
- Open Access
- 24 September 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 69 (3) , 199-1204
Effect of Tin (Sn) Addition on the Corrosion Behavior of Hydroxyapatite (HAP) Coated Mg/MgSn Alloys using Different Coating Methods
This study investigates the effect of tin (Sn) addition on the corrosion behavior of hydroxyapatite (HAP) coated Magnesium (Mg) /MgSn alloys by using two different coating methods. Mg/Mg alloys have gained significant attention in recent years due to their lightweight, high strength, and potential for use in a wide range of industrial applications. However, their corrosion properties during cathodic reactions with abundant hydrogen evolution have limited their widespread use, particularly in biomedical applications. In this study, pure Mg, Mg2Sn, Mg3Sn, Mg4Sn, and Mg5Sn alloys were prepared by powder metallurgy method. Then samples were coated by two different methods, dip-coating and electro-deposition. Potentiodynamic polarization and hydrogen evolution reaction analysis were performed to evaluate the corrosion rate and the hydrogen volume released from the alloys. The results indicate that the addition of Sn does not significantly increase the corrosion resistance of MgSn alloys. However, the current density and hydrogen evolution of the alloys are apparently improved after the coating process. The better corrosion resistance was observed for the Mg with higher composition, which are Mg4Sn and Mg5Sn. Overall, the study demonstrates that coating HAP onto the surface of MgSn alloys is able to improve their corrosion behavior and suppress the hydrogen evolution rate (HER) of the MgSn alloys. This improvement in other ways will increase their potential for industrial applications specifically in biomedical applications.
- 24 September 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 69 (3) , 199-1204
Open AccessEffect of Tin (Sn) Addition on the Corrosion Behavior of Hydroxyapatite (HAP) Coated Mg/MgSn Alloys using Different Coating Methods
This study investigates the effect of tin (Sn) addition on the corrosion behavior of hydroxyapatite (HAP) coated Magnesium (Mg) /MgSn alloys by using two different coating methods. Mg/Mg alloys have gained significant attention in recent years due to their lightweight, high strength, and potential for use in a wide range of industrial applications. However, their corrosion properties during cathodic reactions with abundant hydrogen evolution have limited their widespread use, particularly in biomedical applications. In this study, pure Mg, Mg2Sn, Mg3Sn, Mg4Sn, and Mg5Sn alloys were prepared by powder metallurgy method. Then samples were coated by two different methods, dip-coating and electro-deposition. Potentiodynamic polarization and hydrogen evolution reaction analysis were performed to evaluate the corrosion rate and the hydrogen volume released from the alloys. The results indicate that the addition of Sn does not significantly increase the corrosion resistance of MgSn alloys. However, the current density and hydrogen evolution of the alloys are apparently improved after the coating process. The better corrosion resistance was observed for the Mg with higher composition, which are Mg4Sn and Mg5Sn. Overall, the study demonstrates that coating HAP onto the surface of MgSn alloys is able to improve their corrosion behavior and suppress the hydrogen evolution rate (HER) of the MgSn alloys. This improvement in other ways will increase their potential for industrial applications specifically in biomedical applications.