BCBruna da Silva Cruz

Bruna da Silva Cruz

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bruna da Silva Cruz has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Influence of Wood Chemical Composition on Liquefaction Efficiency and Polyurethane Foam Properties: A Study of Red Angico and Mahogany

    by Emilly Silva, Luísa Cruz-Lopes, Idalina Domingos, Fabricio Gonçalves, Bruna da Silva Cruz, Michelângelo Fassarella, Antônio Thiago de Almeida, Bruno Esteves

    Biomass liquefaction is a thermochemical process that converts lignocellulosic materials into reactive liquid intermediates, enabling the production of bio-based polyols as a sustainable alternative to petroleum-derived chemicals. This study investigates the liquefaction of two lignocellulosic biomasses, Red Angico (Anadenanthera colubrina) and Mahogany (Swietenia macrophylla), using a glycerol–ethylene glycol polyalcohol system, chosen for its renewable origin and high solvating efficiency. The resulting polyols were used to produce polyurethane (PU) foams, and their properties were evaluated in relation to biomass composition. The chemical composition of each biomass significantly influenced its liquefaction behavior and polyol characteristics. Mahogany achieved higher liquefaction efficiency, whereas Red Angico polyols generated PU foams with superior mechanical performance, highlighting the influence of species-specific chemistry. Water content and isocyanate index were found to modulate foam structure and compressive strength. This work demonstrates how tailored liquefaction strategies using polyalcohol systems can optimize bio-based PU foam properties, providing a sustainable route for high-performance polymer materials.


  • Open Access

    How does pyrolysis temperature influence the physicochemical properties of biochar from Coffea canephora husk?

    by Louise Menezes Pimentel, Fabíola Martins Delatorre, Gabriela Fontes Mayrinck Cupertino, Merlindo Jacinto Manjate, Álison Moreira da Silva, Tayná Rebonato Oliveira, Bruna da Silva Cruz, Thiago de Paula Protásio, Ananias Francisco Dias Júnior

    Background: Coffee cultivation is one of the most important agricultural activities in Brazil and generates large amounts of waste during fruit processing. Approximately 93% of the coffee fruit volume is discarded, with the husk being one of the main by-products. Inadequate disposal may cause environmental impacts, whereas its valorization through pyrolysis can provide a sustainable and value-added alternative. This study evaluated the effect of pyrolysis temperature (400, 600, and 800 °C) on the physicochemical properties of biochar produced from coffee husk, aiming at its use as a soil conditioner. Results: The biomass was subjected to controlled pyrolysis in a muffle furnace at a heating rate of 5 °C.min⁻¹ and a residence time of one hour after reaching the final temperature. The resulting biochar was characterized for co-product yield, bulk density, chemical composition (ash, volatiles, and fixed carbon), and pH. Increasing the pyrolysis temperature reduced biochar yield and density, while increasing fixed carbon content. Fixed carbon increased from 67% at 400 °C to 77% at 800 °C, whereas volatile content decreased from 25% to 10%. The pH decreased up to 600 °C and increased at 800 °C. Conclusion: Pyrolysis temperature strongly influences biochar properties, requiring a balance between yield and quality according to the intended application. Although all evaluated temperatures were technically feasible, biochar produced at 800 °C showed the greatest potential for long-term application in tropical acidic soils.

  • Open Access

    Influence of Wood Chemical Composition on Liquefaction Efficiency and Polyurethane Foam Properties: A Study of Red Angico and Mahogany

    by Emilly Soares Gomes Silva, Luísa Cruz-Lopes, Idalina Domingos, Fabricio Gonçalves, Bruna da Silva Cruz, Michelângelo Vargas Fassarella, Antônio Thiago de Almeida, Bruno Esteves

    This study investigates the chemical composition, liquefaction behavior, and polyurethane foam (PU) properties of two lignocellulosic biomasses, Red Angico (Anadenanthera colubrina) and Mahogany (Swietenia macrophylla), as potential sources of bio-based polyols. Detailed chemical characterization revealed that Red Angico has high α-cellulose (48.44%) and moderate hemicellulose (25.68%) content, while Mahogany shows the inverse, with high hemicellulose (56.11%) and low cellulose (18.24%), influencing their reactivity during liquefaction. Liquefaction trials using a polyalcohol system (glycerol:ethylene glycol) demonstrated higher conversion efficiency for Mahogany, reaching 93.4% at 180 °C in 60 minutes, compared to 73.9% for Red Angico. Hydroxyl value analysis revealed increasing functionality for Mahogany polyols with time, whereas Red Angico showed declining values, indicating possible recondensation reactions. PU foams were synthesized using the resulting polyols, with compressive strength and modulus increasing with isocyanate index. Red Angico foams, despite lower OH values, displayed superior mechanical performance, attributed to their lower hydroxyl content favoring optimal crosslinking. Water content, used as a chemical blowing agent, negatively impacted compressive strength for both foams due to increased porosity. Results highlight the species-specific influence of chemical composition on liquefaction behavior and foam performance, suggesting tailored processing conditions are essential for maximizing bio-based PU properties.