Influence of Wood Chemical Composition on Liquefaction Efficiency and Polyurethane Foam Properties: A Study of Red Angico and Mahogany
Authors:
- Emilly Soares Gomes SilvaESEmilly Soares Gomes Silva
- Luísa Cruz-LopesLuísa Cruz-Lopes
- Idalina DomingosIDIdalina Domingos
- Fabricio GonçalvesFabricio Gonçalves
- Bruna da Silva CruzBCBruna da Silva Cruz
- Michelângelo Vargas FassarellaMFMichelângelo Vargas Fassarella
- Antônio Thiago de AlmeidaAAAntônio Thiago de Almeida
- Bruno EstevesBruno Esteves
Preprint
- 22 December 2025
- preprint
- Published by MDPI AG in Preprints.org
Abstract
This study investigates the chemical composition, liquefaction behavior, and polyurethane foam (PU) properties of two lignocellulosic biomasses, Red Angico (Anadenanthera colubrina) and Mahogany (Swietenia macrophylla), as potential sources of bio-based polyols. Detailed chemical characterization revealed that Red Angico has high α-cellulose (48.44%) and moderate hemicellulose (25.68%) content, while Mahogany shows the inverse, with high hemicellulose (56.11%) and low cellulose (18.24%), influencing their reactivity during liquefaction. Liquefaction trials using a polyalcohol system (glycerol:ethylene glycol) demonstrated higher conversion efficiency for Mahogany, reaching 93.4% at 180 °C in 60 minutes, compared to 73.9% for Red Angico. Hydroxyl value analysis revealed increasing functionality for Mahogany polyols with time, whereas Red Angico showed declining values, indicating possible recondensation reactions. PU foams were synthesized using the resulting polyols, with compressive strength and modulus increasing with isocyanate index. Red Angico foams, despite lower OH values, displayed superior mechanical performance, attributed to their lower hydroxyl content favoring optimal crosslinking. Water content, used as a chemical blowing agent, negatively impacted compressive strength for both foams due to increased porosity. Results highlight the species-specific influence of chemical composition on liquefaction behavior and foam performance, suggesting tailored processing conditions are essential for maximizing bio-based PU properties.Keywords
All Related Versions
- Version 1, 2025-12-22, Preprints
- Published version: Materials, 19 (2), 417.
This publication has 37 references indexed in Scilit:
- Acid–base-catalyzed two-step liquefaction of empty fruit bunch lignin residue for preparation of biopolyol and high-performance biopolyurethanesWood Science and Technology, 2021
- Production of prebiotic-xylooligosaccharides from alkali pretreated mahogany and mango wood sawdust by using purified xylanase of Clostridium strain BOH3Carbohydrate Polymers, 2017
- Solvothermal liquefaction of microalgal Tetraselmis sp. biomass to prepare biopolyols by using PEG#400-blended glycerolAlgal Research, 2015
- Polyols and Polyurethanes from the Liquefaction of Lignocellulosic BiomassChemSusChem, 2013
- Investigation of liquefied wood residues based on cellulose, hemicellulose, and ligninJournal of Applied Polymer Science, 2011
- Characterization of novolac type liquefied wood/phenol/formaldehyde (LWPF) resinEuropean Journal of Wood and Wood Products, 2009
- Effects of the hydroxyl value of polyol in rigid polyurethane foamsPolymers for Advanced Technologies, 2008
- Preparation and characterization of water‐blown polyurethane foams from liquefied cornstalk polyolJournal of Applied Polymer Science, 2008
- Preparation of liquefied wood-based resins and their application in molding materialForest Science and Practice, 2007
- Fast liquefaction of bagasse in ethylene carbonate and preparation of epoxy resin from the liquefied productJournal of Applied Polymer Science, 2005