Doğukan KOLCU
Doğukan KOLCU has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Dursun Meriç
KARADENİZ TEKNİK ÜNİVERSİTESİ, ABDULLAH KANCA MESLEK YÜKSEKOKULU
1 shared publication - Gencaga Purcek
Department of Mechanical Engineering, Karadeniz Technical University, Trabzon, Turkey
1 shared publication - Harun Yanar
KARADENİZ TEKNİK ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ
1 shared publication - Hasan Gedikli
Karadeniz Technical University
1 shared publication - Hasan Sofuoglu
Department of Mechanical Engineering, Karadeniz Technical University, Trabzon, Turkey
1 shared publication - Hüseyin Can Aksa
Karadeniz Teknik Üniversitesi
1 shared publication
Latest Publications
- Open Access
- 15 September 2026
- Published by Elsevier in SSRN Electronic Journal
Effects of Additive Manufacturing Process on the Microstructural and Mechanical Properties of 316L Substrate Coated with Ti6Al4V Powder by Cold Spraying Method
In this study, the microstructural and mechanical properties of the 316L stainless steel substrate (316L-SSS) produced with additive manufacturing (AM) method and the coated substrate (Ti-CS-SSS) subsequently coated with Ti6Al4V powders using the cold spray (CS) method were comprehensively investigated. The microstructural features, phase evolution, and mechanical performance of the resulting bimetallic structure were examined using SEM, EDS, XRD, microhardness, and uniaxial tensile tests. The results demonstrated that while a porosity of approximately 20% and an accompanying low apparent hardness were detected in the coating layer due to the physical limitations of the process gas, the austenitic substrate structure, produced with extremely high cooling rates, maintained its superior hardness without undergoing any thermal degradation. Furthermore, tensile tests and fracture surface analyses revealed that the 316L-SSS exhibited anisotropic behavior depending on the build direction, and the geometric elongation mismatch between the ductile substrate and the severely strain-hardened brittle coating layer drove the failure mechanism toward interfacial debonding. In conclusion, it was proven that the topography provided by the as-built 316L-SSS effectively tolerates low kinetic energy in LPCS systems, maximizing coating adhesion and offering an innovative foundation for the synthesis of functional bimetallic structures.
- 15 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEffects of Additive Manufacturing Process on the Microstructural and Mechanical Properties of 316L Substrate Coated with Ti6Al4V Powder by Cold Spraying Method
In this study, the microstructural and mechanical properties of the 316L stainless steel substrate (316L-SSS) produced with additive manufacturing (AM) method and the coated substrate (Ti-CS-SSS) subsequently coated with Ti6Al4V powders using the cold spray (CS) method were comprehensively investigated. The microstructural features, phase evolution, and mechanical performance of the resulting bimetallic structure were examined using SEM, EDS, XRD, microhardness, and uniaxial tensile tests. The results demonstrated that while a porosity of approximately 20% and an accompanying low apparent hardness were detected in the coating layer due to the physical limitations of the process gas, the austenitic substrate structure, produced with extremely high cooling rates, maintained its superior hardness without undergoing any thermal degradation. Furthermore, tensile tests and fracture surface analyses revealed that the 316L-SSS exhibited anisotropic behavior depending on the build direction, and the geometric elongation mismatch between the ductile substrate and the severely strain-hardened brittle coating layer drove the failure mechanism toward interfacial debonding. In conclusion, it was proven that the topography provided by the as-built 316L-SSS effectively tolerates low kinetic energy in LPCS systems, maximizing coating adhesion and offering an innovative foundation for the synthesis of functional bimetallic structures.
- Open Access
- 31 December 2025
- Published by The International Journal of Materials and Engineering Technology in The International Journal of Materials and Engineering Technology
- Vol. 8 (2) , 47-55
EFFECT OF COLD SPRAYING PARAMETERS ON THE DEPOSITION PERFORMANCE OF ADDITIVELY MANUFACTURED Ti6Al4V ALLOY
Cold Spray (CS) is a solid-state coating technology where metal powders are propelled at supersonic velocities to form dense coatings via severe plastic deformation upon impact, without melting. This mechanism preserves the feedstock material's integrity by minimizing thermal degradation, such as oxidation and residual stresses, making it ideal for surface refurbishment and restoration in thermally sensitive applications. In this study, CS deposition was sprayed onto a Ti6Al4V substrate (60x60x4 mm³) fabricated via Selective Laser Melting (SLM), using spherical Ti6Al4V powders with a particle size distribution of 0–20 µm. The primary objective was to optimize CS process parameters to observe coating integrity and interfacial adhesion. Considering the limitations of low-pressure spraying, temperature, nozzle-distance, and advancement speed were fixed at constant values, while gas pressure and powder feed rate were systematically varied. Coating characteristics, including thickness, homogeneity, surface morphology, and adhesion—were evaluated through scanning electron microscopy (SEM). Subsequently, under the previously optimized selected parameter set, the effect of different advancement speeds (10, 20, 30, and 40 mm/s) on the accumulation behavior was analyzed.
- 31 December 2025
- Published by The International Journal of Materials and Engineering Technology in The International Journal of Materials and Engineering Technology
- Vol. 8 (2) , 47-55
Open AccessEFFECT OF COLD SPRAYING PARAMETERS ON THE DEPOSITION PERFORMANCE OF ADDITIVELY MANUFACTURED Ti6Al4V ALLOY
Cold Spray (CS) is a solid-state coating technology where metal powders are propelled at supersonic velocities to form dense coatings via severe plastic deformation upon impact, without melting. This mechanism preserves the feedstock material's integrity by minimizing thermal degradation, such as oxidation and residual stresses, making it ideal for surface refurbishment and restoration in thermally sensitive applications. In this study, CS deposition was sprayed onto a Ti6Al4V substrate (60x60x4 mm³) fabricated via Selective Laser Melting (SLM), using spherical Ti6Al4V powders with a particle size distribution of 0–20 µm. The primary objective was to optimize CS process parameters to observe coating integrity and interfacial adhesion. Considering the limitations of low-pressure spraying, temperature, nozzle-distance, and advancement speed were fixed at constant values, while gas pressure and powder feed rate were systematically varied. Coating characteristics, including thickness, homogeneity, surface morphology, and adhesion—were evaluated through scanning electron microscopy (SEM). Subsequently, under the previously optimized selected parameter set, the effect of different advancement speeds (10, 20, 30, and 40 mm/s) on the accumulation behavior was analyzed.