Byoung Seung Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Byoung Seung Kim has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Jinhyun Jeong
H&CD Research Group, Korea Institute of Fusion Energy, Daejeon 34133, Republic of Korea
2 shared publications - Geonwoo Baek
School of Electrical and Electronic Engineering, Yonsei University, Seoul Korea (the Republic of)
1 shared publication J.G. Kwak
1 shared publication- Jae Young Jang
Department of Energy Systems Engineering, Seoul National University 1 , Seoul 08826, Republic of Korea
1 shared publication - Jaewook Kim
Korea Institute of Fusion Energy, Daejeon, Korea, Republic Of
1 shared publication S.C. Hong
1 shared publication
Latest Publications
- Open Access
- 1 October 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 233
Operational stability and beam transport constraints in long-pulse neutral beam injection on KSTAR
- 1 October 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 233
Open AccessOperational stability and beam transport constraints in long-pulse neutral beam injection on KSTAR
- 1 February 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (2) , 025005
Analysis and mitigation of backstreaming-electron-induced heat load on the KSTAR NBI E-dump under a cusp magnetic fields
The KSTAR neutral beam injector provides up to 10 MW of plasma heating power, and secondary electrons generated from the acceleration grids can produce significant thermal loads inside the ion source. An electron dump (E-dump) is installed to dissipate this heat and prevent damage. In this study, the total heat load on the E-dump was experimentally measured using a water-cooled calorimetric diagnostic, and numerical simulations were performed to evaluate the heat-flux distribution under the cusp magnetic field configuration. While removing the E-dump magnets could reduce the peak heat flux, the magnets were retained to avoid the associated risk of arc-efficiency degradation. Instead, the E-dump cooling-water channels were enlarged, resulting in significantly improved heat removal performance while maintaining the original cusp magnetic field configuration.
- 1 February 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (2) , 025005
Analysis and mitigation of backstreaming-electron-induced heat load on the KSTAR NBI E-dump under a cusp magnetic fields
The KSTAR neutral beam injector provides up to 10 MW of plasma heating power, and secondary electrons generated from the acceleration grids can produce significant thermal loads inside the ion source. An electron dump (E-dump) is installed to dissipate this heat and prevent damage. In this study, the total heat load on the E-dump was experimentally measured using a water-cooled calorimetric diagnostic, and numerical simulations were performed to evaluate the heat-flux distribution under the cusp magnetic field configuration. While removing the E-dump magnets could reduce the peak heat flux, the magnets were retained to avoid the associated risk of arc-efficiency degradation. Instead, the E-dump cooling-water channels were enlarged, resulting in significantly improved heat removal performance while maintaining the original cusp magnetic field configuration.