Samuel Okurut
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Samuel Okurut has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Alphonse Candia
Agricultural Engineering and Appropriate Technology Research Center (AEATREC)-Namalere, National Agricultural Research Laboratories (NARL), National Agricultural Research Organization (NARO), Entebbe, Uganda
7 shared publications - George Samuel Onep
Department of Mechanical Engineering, School of Engineering and Applied Sciences, Kampala International University, Ishaka-Bushenyi, Uganda
7 shared publications - Milon Selvam Dennison
Department of Mechanical Engineering, School of Engineering and Applied Sciences, Kampala International University, Ishaka-Bushenyi, Uganda
7 shared publications - Omer Eisa Babiker
Department of Mechanical Engineering, School of Engineering and Applied Sciences, Kampala International University, Ishaka-Bushenyi, Uganda
7 shared publications - Ronald Walozi
Department of Mechanical Engineering, School of Engineering and Applied Sciences, Kampala International University, Ishaka-Bushenyi, Uganda
7 shared publications - Yinka Sofihullahi Sanusi
Department of Mechanical Engineering, School of Engineering and Applied Sciences, Kampala International University, Ishaka-Bushenyi, Uganda
7 shared publications
Latest Publications
- Open Access
- 25 September 2026
- Published by Springer Nature in Discover Applied Sciences
Effect of rice husk content on thermal and chemical characteristics of rice husks and pine sawdust heterogeneous briquettes
- 25 September 2026
- Published by Springer Nature in Discover Applied Sciences
Open AccessEffect of rice husk content on thermal and chemical characteristics of rice husks and pine sawdust heterogeneous briquettes
- Open Access
- 25 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Thermal–chemical characterization of hydrochloric acid-treated rice husk–pine sawdust heterogeneous briquettes
Heterogeneous briquettes formulated from abundant rice husk and pine sawdust blended and treated with HCl can address limited access to clean energy. However, briquettes from untreated blends of rice husk and pine sawdust exhibit higher ash content, which reduces their thermochemical characteristics. The aim of the study was to determine the effect of HCl on the thermal-chemical properties of heterogeneous briquettes made from a blend of rice husk and pine sawdust, treated at varying concentrations. The study treated a blend of 10 wt% rice husk and 90 wt% pine sawdust with HCl concentrations of 1%, 2%, 3%, 4%, and 5% at ambient temperature for one hour. The briquettes were then fabricated and analyzed to identify optimal conditions that enhance calorific value and thermal efficiency while reducing emissions. The novelty lies in blending rice husk and pine sawdust biomasses, where pine sawdust provides better calorific value and lower ash content, while rice husks, in addition to ensuring sustainability due to being non-utilized yet readily available, provide thermal stability to the briquettes, given relatively higher silica content. The study's novelty extends beyond ash and higher heating value analyses to lignocellulose composition, thermal efficiency, and emissions analysis. Findings revealed that briquettes from treated blends exhibited reduced ash content (2.34 ± 0.05% vs. 10.84 ± 0.85%), higher HHV (18.99 ± 0.02 MJ/kg vs. 18.15 ± 0.09 MJ/kg), and thermal efficiency (73.49 ± 1.07% vs. 49.90 ± 1.08%) than untreated briquettes. These briquettes had reduced CO emissions (0.82 ± 0.01%), meeting the Tier 5 range (≤ 3 g/MJd) and PM2.5 emissions (80.22 ± 1.96 mg/MJd) meeting the Tier 3 range (> 6 2 mg/MJd to ≤ 218 mg/MJd). 5% HCl was the optimal treatment condition, in which briquettes exhibited the highest HHV and thermal efficiency while achieving the lowest PM2.5 and relatively low CO emissions. The study contributes to the literature by demonstrating that acid-treated biomass briquettes, optimally at 5% HCl, achieve significantly lower ash content, higher calorific value, and thermal efficiency, as well as reduced CO and PM2.5 emissions, meeting international clean cooking standards, thereby advancing sustainable fuel development and providing practical means for cleaner energy transitions.
- 25 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessThermal–chemical characterization of hydrochloric acid-treated rice husk–pine sawdust heterogeneous briquettes
Heterogeneous briquettes formulated from abundant rice husk and pine sawdust blended and treated with HCl can address limited access to clean energy. However, briquettes from untreated blends of rice husk and pine sawdust exhibit higher ash content, which reduces their thermochemical characteristics. The aim of the study was to determine the effect of HCl on the thermal-chemical properties of heterogeneous briquettes made from a blend of rice husk and pine sawdust, treated at varying concentrations. The study treated a blend of 10 wt% rice husk and 90 wt% pine sawdust with HCl concentrations of 1%, 2%, 3%, 4%, and 5% at ambient temperature for one hour. The briquettes were then fabricated and analyzed to identify optimal conditions that enhance calorific value and thermal efficiency while reducing emissions. The novelty lies in blending rice husk and pine sawdust biomasses, where pine sawdust provides better calorific value and lower ash content, while rice husks, in addition to ensuring sustainability due to being non-utilized yet readily available, provide thermal stability to the briquettes, given relatively higher silica content. The study's novelty extends beyond ash and higher heating value analyses to lignocellulose composition, thermal efficiency, and emissions analysis. Findings revealed that briquettes from treated blends exhibited reduced ash content (2.34 ± 0.05% vs. 10.84 ± 0.85%), higher HHV (18.99 ± 0.02 MJ/kg vs. 18.15 ± 0.09 MJ/kg), and thermal efficiency (73.49 ± 1.07% vs. 49.90 ± 1.08%) than untreated briquettes. These briquettes had reduced CO emissions (0.82 ± 0.01%), meeting the Tier 5 range (≤ 3 g/MJd) and PM2.5 emissions (80.22 ± 1.96 mg/MJd) meeting the Tier 3 range (> 6 2 mg/MJd to ≤ 218 mg/MJd). 5% HCl was the optimal treatment condition, in which briquettes exhibited the highest HHV and thermal efficiency while achieving the lowest PM2.5 and relatively low CO emissions. The study contributes to the literature by demonstrating that acid-treated biomass briquettes, optimally at 5% HCl, achieve significantly lower ash content, higher calorific value, and thermal efficiency, as well as reduced CO and PM2.5 emissions, meeting international clean cooking standards, thereby advancing sustainable fuel development and providing practical means for cleaner energy transitions.
- Open Access
- 28 May 2026
- Published by Springer Nature in Discover Mechanical Engineering
- Vol. 5 (1)
Comparative analysis of acid treatments on char production and energy productivity of rice husk and pine sawdust briquettes
- 28 May 2026
- Published by Springer Nature in Discover Mechanical Engineering
- Vol. 5 (1)
Open AccessComparative analysis of acid treatments on char production and energy productivity of rice husk and pine sawdust briquettes
- Open Access
- 2 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16
Influences of sulfuric acid treatment on thermo-chemical properties of rice husk-pine sawdust heterogeneous briquettes
Heterogeneous briquettes made from rice husk-pine sawdust blend treated with sulfuric acid have the potential to satisfy the increasing global demand for sustainable energy. However, untreated blends are constrained by unfavorable thermochemical properties. In this study, a blend comprising 10 wt% rice husk and 90 wt% pine sawdust was subjected to H2SO4 treatment at 1%, 2%, 3%, 4%, and 5% (v/v) for 1-h at ambient temperature. Briquettes were subsequently formulated, and thermochemical properties were assessed to identify treatment conditions enhancing energy and combustion performance. The briquettes were analyzed for lignocellulose using acid detergent fiber and lignin, and neutral detergent fiber; higher heating value HHV using calorimetry; and thermal efficiency and emissions using a water boiling test (WBT) coupled with a portable emission monitoring system (PEMS) 4000-series sensor. The results demonstrated that sulfuric acid treatment increased briquettes’ HHV from 18.21 ± 0.09 MJ/kg (untreated) up to 18.82 ± 0.03 MJ/kg. The 1% concentration yielded the highest thermal efficiency (71.49 ± 2.05%), accompanied by the lowest CO emissions (0.88 ± 0.03 g/MJd), meeting the ISO 19,867–1:2018 Tier 5 limits, and the lowest PM2.5 emissions (100.67 ± 1.53 mg/MJd), within the Tier 3 limit. Overall, the optimal sulfuric acid treatment condition for effective combustion performance and energy delivery was 1%. However, cost–benefit analysis should be incorporated into future studies for practical real-world application.
- 2 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16
Open AccessInfluences of sulfuric acid treatment on thermo-chemical properties of rice husk-pine sawdust heterogeneous briquettes
Heterogeneous briquettes made from rice husk-pine sawdust blend treated with sulfuric acid have the potential to satisfy the increasing global demand for sustainable energy. However, untreated blends are constrained by unfavorable thermochemical properties. In this study, a blend comprising 10 wt% rice husk and 90 wt% pine sawdust was subjected to H2SO4 treatment at 1%, 2%, 3%, 4%, and 5% (v/v) for 1-h at ambient temperature. Briquettes were subsequently formulated, and thermochemical properties were assessed to identify treatment conditions enhancing energy and combustion performance. The briquettes were analyzed for lignocellulose using acid detergent fiber and lignin, and neutral detergent fiber; higher heating value HHV using calorimetry; and thermal efficiency and emissions using a water boiling test (WBT) coupled with a portable emission monitoring system (PEMS) 4000-series sensor. The results demonstrated that sulfuric acid treatment increased briquettes’ HHV from 18.21 ± 0.09 MJ/kg (untreated) up to 18.82 ± 0.03 MJ/kg. The 1% concentration yielded the highest thermal efficiency (71.49 ± 2.05%), accompanied by the lowest CO emissions (0.88 ± 0.03 g/MJd), meeting the ISO 19,867–1:2018 Tier 5 limits, and the lowest PM2.5 emissions (100.67 ± 1.53 mg/MJd), within the Tier 3 limit. Overall, the optimal sulfuric acid treatment condition for effective combustion performance and energy delivery was 1%. However, cost–benefit analysis should be incorporated into future studies for practical real-world application.
- Top Cited PapersOpen Access
- 31 March 2026
- Published by Springer Nature in Discover Sustainability
- Vol. 7 (1)
A comprehensive review of chemical treatments for biomass feedstock to enhance briquette characteristics
Converting biomass into briquettes offers a promising way to meet increasing global energy needs while reducing environmental issues. However, briquette performance is limited by low calorific value, high ash, and moisture contents. Materials such as corn cobs, groundnut shells, banana leaves, sugarcane bagasse, and rice husks contain ash levels exceeding the recommended 4%, resulting in slagging and reduced thermal performance. Chemical treatment with alkali, acid, and hydrothermal methods has become a practical approach to enhancing briquette quality. This review evaluates the effectiveness of these treatments by examining their influence on biomass characteristics. A structured narrative review methodology was applied, involving a comprehensive literature search of Google Scholar, Scopus, and other sources, covering peer-reviewed journals, grey literature, and case studies published in English between 2005 and 2025. Findings revealed sodium hydroxide as the most widely applied alkali, increasing calorific value by up to 16.2% in celosia argentea , cabbage, and banana leaf biomass. Among acids, sulphuric is the most effective, enhancing calorific value by up to 31.83% in rice stalks and watermelon biomasses, while hydrochloric achieves ash reduction of up to 96.26% in corn and soybean stalks. Briquettes for industrial application are classified according to DIN 51731 and ISO 17225 (class I1-I3 for industrial and B for standardized domestic heating) by ash content < 4%, moisture < 13%, volatile matter < 40%, net calorific value ≥ 14.5 MJ/kg, nitrogen < 0.6%, and sulphur < 0.8%. Despite demonstrated improvements, inhibitor formation, effluent disposal, and equipment corrosion hinder real-world application. Future research should optimize chemical treatment concentrations for heterogeneous biomasses and conduct post-treatment briquette analysis, including environmental and techno-economic implications.
- 31 March 2026
- Published by Springer Nature in Discover Sustainability
- Vol. 7 (1)
Top Cited PapersOpen AccessA comprehensive review of chemical treatments for biomass feedstock to enhance briquette characteristics
Converting biomass into briquettes offers a promising way to meet increasing global energy needs while reducing environmental issues. However, briquette performance is limited by low calorific value, high ash, and moisture contents. Materials such as corn cobs, groundnut shells, banana leaves, sugarcane bagasse, and rice husks contain ash levels exceeding the recommended 4%, resulting in slagging and reduced thermal performance. Chemical treatment with alkali, acid, and hydrothermal methods has become a practical approach to enhancing briquette quality. This review evaluates the effectiveness of these treatments by examining their influence on biomass characteristics. A structured narrative review methodology was applied, involving a comprehensive literature search of Google Scholar, Scopus, and other sources, covering peer-reviewed journals, grey literature, and case studies published in English between 2005 and 2025. Findings revealed sodium hydroxide as the most widely applied alkali, increasing calorific value by up to 16.2% in celosia argentea , cabbage, and banana leaf biomass. Among acids, sulphuric is the most effective, enhancing calorific value by up to 31.83% in rice stalks and watermelon biomasses, while hydrochloric achieves ash reduction of up to 96.26% in corn and soybean stalks. Briquettes for industrial application are classified according to DIN 51731 and ISO 17225 (class I1-I3 for industrial and B for standardized domestic heating) by ash content < 4%, moisture < 13%, volatile matter < 40%, net calorific value ≥ 14.5 MJ/kg, nitrogen < 0.6%, and sulphur < 0.8%. Despite demonstrated improvements, inhibitor formation, effluent disposal, and equipment corrosion hinder real-world application. Future research should optimize chemical treatment concentrations for heterogeneous biomasses and conduct post-treatment briquette analysis, including environmental and techno-economic implications.
- 2 March 2026
- Published by Sciencedomain International in Asian Journal of Agricultural Extension, Economics & Sociology
- Vol. 44 (3) , 122-141
Profitability Analysis of Animal Traction for Smallholder Farmers in Eastern Uganda: A Case of Busoga Sub-region
Animal Traction (AT) remains a critical intermediate mechanization pathway for smallholder farmers in Eastern Uganda, yet empirical evidence on its economic performance remains limited. This study evaluated the profitability and investment viability of two enterprise models, namely Basic Animal Traction (BAT) and Advanced Animal Traction (AAT), among smallholder farmers in the Busoga sub-region. A mixed-methods research design was used, comprising a household survey of 664 households, 23 Focus Group Discussions (FGDs), and 68 key informant interviews across five districts. Financial viability was evaluated over a six-year investment period using Net Present Value (NPV), Internal Rate of Return (IRR), Gross Margin (GM), and Payback Period metrics, along with sensitivity analysis. The results indicated that AT systems are integrated within smallholder production systems characterized by small landholdings (average 1.66 ha), mixed crop-livestock enterprises, and dependence on family labour. Cost structure analysis showed significant initial capital requirements, with fixed costs accounting for about 55% of total investment for both BAT (UGX 5.88 million) and AAT (UGX 9.50 million), posing a major adoption barrier. Despite this, both models performed strongly financially under baseline conditions. For maize and bean production, BAT achieved IRRs of 57-76%, NPVs of UGX 22.2-29.8 million, and payback periods of less than 1.1 years. AAT reached higher IRRs (73-82%), NPVs (UGX 41.6-47.0 million), and gross margins (36.4-38.6%), due to additional income from planting and weeding hire services. Sensitivity analysis indicated that profitability is sensitive to 15-25% reductions in output and to excessive reinvestment of hire-service revenues, underscoring the need for risk management and careful capital planning. While AAT offers greater income-growth potential, BAT offers a lower-capital, lower-risk entry pathway. Overall, AT offers a profitable, suitable, and expandable mechanization option. Policy support should focus on affordable financing, technical skills development, service diversification, and gender-sensitive approaches to encourage inclusive mechanization.
- 2 March 2026
- Published by Sciencedomain International in Asian Journal of Agricultural Extension, Economics & Sociology
- Vol. 44 (3) , 122-141
Profitability Analysis of Animal Traction for Smallholder Farmers in Eastern Uganda: A Case of Busoga Sub-region
Animal Traction (AT) remains a critical intermediate mechanization pathway for smallholder farmers in Eastern Uganda, yet empirical evidence on its economic performance remains limited. This study evaluated the profitability and investment viability of two enterprise models, namely Basic Animal Traction (BAT) and Advanced Animal Traction (AAT), among smallholder farmers in the Busoga sub-region. A mixed-methods research design was used, comprising a household survey of 664 households, 23 Focus Group Discussions (FGDs), and 68 key informant interviews across five districts. Financial viability was evaluated over a six-year investment period using Net Present Value (NPV), Internal Rate of Return (IRR), Gross Margin (GM), and Payback Period metrics, along with sensitivity analysis. The results indicated that AT systems are integrated within smallholder production systems characterized by small landholdings (average 1.66 ha), mixed crop-livestock enterprises, and dependence on family labour. Cost structure analysis showed significant initial capital requirements, with fixed costs accounting for about 55% of total investment for both BAT (UGX 5.88 million) and AAT (UGX 9.50 million), posing a major adoption barrier. Despite this, both models performed strongly financially under baseline conditions. For maize and bean production, BAT achieved IRRs of 57-76%, NPVs of UGX 22.2-29.8 million, and payback periods of less than 1.1 years. AAT reached higher IRRs (73-82%), NPVs (UGX 41.6-47.0 million), and gross margins (36.4-38.6%), due to additional income from planting and weeding hire services. Sensitivity analysis indicated that profitability is sensitive to 15-25% reductions in output and to excessive reinvestment of hire-service revenues, underscoring the need for risk management and careful capital planning. While AAT offers greater income-growth potential, BAT offers a lower-capital, lower-risk entry pathway. Overall, AT offers a profitable, suitable, and expandable mechanization option. Policy support should focus on affordable financing, technical skills development, service diversification, and gender-sensitive approaches to encourage inclusive mechanization.
- Top Cited PapersOpen Access
- 2 February 2026
- Published by Springer Nature in Discover Applied Sciences
- Vol. 8 (3)
Critical review of biomass heterogeneity effects on briquette combustion
- 2 February 2026
- Published by Springer Nature in Discover Applied Sciences
- Vol. 8 (3)
Top Cited PapersOpen AccessCritical review of biomass heterogeneity effects on briquette combustion
- Open Access
- 1 January 2026
- Published by Wiley in International Journal of Energy Research
- Vol. 2026 (1)
Effect of Nitric Acid Treatment on Combustion and Energy Properties of Rice Husk–Pine Sawdust Briquettes
Briquettes produced from rice husk–pine sawdust blends show strong potential as sustainable solid fuel; however, their practical application is constrained by high ash content and poor combustion performance, and there remains limited understanding of effective pretreatment strategies to simultaneously improve their energy, efficiency, emissions, and mechanical properties. This study investigated the effect of nitric acid treatment on combustion and energy‐related properties of briquettes produced from 10 wt% rice husk and 90 wt% pine sawdust blend. The blend was treated with varying nitric acid concentrations (1%–5% v / v ) at room temperature for 1 h, then compacted into briquettes. The briquettes were analyzed by proximate analysis using a thermogravimetric method; lignocellulose composition using acid detergent fiber (ADF) assays; higher heating value (HHV) using an oxygen bomb calorimeter; thermal efficiency, burning rate, and emissions using a water boiling test (WBT) with emission monitoring. The findings revealed an ash reduction of up to 93.38% and an HHV enhancement of up to 5.08% at the optimal nitric acid concentration of 1%. The enhancement in thermal efficiency was up to 52.71%, while CO reduction was up to 55.10%, all at concentration of 4%. The PM 2.5 emissions reduction reached 36.57% at an optimal concentration of 1%. Notably, a 1% nitric acid concentration yielded briquettes with the lowest ash content, the highest HHV, superior thermal performance, and minimal PM 2.5 and CO emissions. The findings demonstrate that low‐concentration nitric acid treatment significantly enhances the fuel quality and environmental performance of rice husk–pine sawdust briquettes, supporting their potential as a cleaner bioenergy source for household use. However, future studies should incorporate economic analysis for the real‐world application of nitric acid treatment in briquette production.
- 1 January 2026
- Published by Wiley in International Journal of Energy Research
- Vol. 2026 (1)
Open AccessEffect of Nitric Acid Treatment on Combustion and Energy Properties of Rice Husk–Pine Sawdust Briquettes
Briquettes produced from rice husk–pine sawdust blends show strong potential as sustainable solid fuel; however, their practical application is constrained by high ash content and poor combustion performance, and there remains limited understanding of effective pretreatment strategies to simultaneously improve their energy, efficiency, emissions, and mechanical properties. This study investigated the effect of nitric acid treatment on combustion and energy‐related properties of briquettes produced from 10 wt% rice husk and 90 wt% pine sawdust blend. The blend was treated with varying nitric acid concentrations (1%–5% v / v ) at room temperature for 1 h, then compacted into briquettes. The briquettes were analyzed by proximate analysis using a thermogravimetric method; lignocellulose composition using acid detergent fiber (ADF) assays; higher heating value (HHV) using an oxygen bomb calorimeter; thermal efficiency, burning rate, and emissions using a water boiling test (WBT) with emission monitoring. The findings revealed an ash reduction of up to 93.38% and an HHV enhancement of up to 5.08% at the optimal nitric acid concentration of 1%. The enhancement in thermal efficiency was up to 52.71%, while CO reduction was up to 55.10%, all at concentration of 4%. The PM 2.5 emissions reduction reached 36.57% at an optimal concentration of 1%. Notably, a 1% nitric acid concentration yielded briquettes with the lowest ash content, the highest HHV, superior thermal performance, and minimal PM 2.5 and CO emissions. The findings demonstrate that low‐concentration nitric acid treatment significantly enhances the fuel quality and environmental performance of rice husk–pine sawdust briquettes, supporting their potential as a cleaner bioenergy source for household use. However, future studies should incorporate economic analysis for the real‐world application of nitric acid treatment in briquette production.